Tenders Are Invited For Modernization Of The Water Intake And Treatment Station In Jabłówko, Łabiszyn Commune

1) The Subject Of The Order Is: Modernization Of The Water Intake And Treatment Station In The Town Of Jabłówko, Łabiszyn Commune. 2) Investment Location: Plot No.: - Plot No. 146/4, Jabłówko Registration District, Łabiszyn Commune; - Plot No. 143/13, Jabłówko Registration Precinct, Commune Łabiszyn;- Plot No. 255/3, Jabłówko Registration District, Łabiszyn Commune. Scope Of Work: A) Technological And Hydraulic Part: - Disassembly Of Existing Equipment And Utilities Inside The Suw Building; - Installation Of Technological Devices (Filters, Aerator, Pumps: Flushing, Rinsing Water, Pumping Station Ii°, Hydrophore Set, Blower, Compressors, Hypochlorite Dosing System , Uv Disinfection System), - Installation Of Technological And Hydraulic Installations (Piping And Fittings) Based On Acid-Resistant Steel Pipes, - Installation Of Dampers With Electric Drives, Flow Meters And Control And Measurement Equipment, - Installation Of Compressed Air Installations, - Replacement Of Submersible Pumps In The Well No. 2 And No. 3 Along With The Renovation And Modernization Of The Well (Replacement Of Piping And Fittings, Replacement Of The Casing Of The Deep Well), - Installation Of Two Retention Tanks For Treated Water Inside The Suw Building, - Review Of The Technical Condition Of The Existing Clarifier And Renovation Of The Rinsing Water Clarifier Chambers, - Reconstruction The Existing Installation For Discharging Rinsing Water From The Suw Building To The Existing Rinsing Water Settling Tank - Installation Of An Overlying Water Pump In The Rinsing Water Settling Tank, - Inspection Of The Existing Pipeline On The Section Rinsing Water Settling Tank - Outlet To The Ditch, Using An Inspection Camera, And In Case Of Poor Condition, Renovation Of The Installation, - Installation Of Drainage For The Floor Of The Suw Building, - Installation Of Internal Water Supply And Sewage Installations, - Installation Of External Sewage Installations, - Renovation And Replacement Of External Water Supply Installations On The Section Of Well No. 2 - The Suw Building, - Installation Of Gravity And Mechanical Ventilation And Heating Installations In The Suw Building, Including Installation Of A Heat Pump, - Installation Of A Tank For Leachate From The Chlorination Plant, - Installation Of A Septic Tank For Sanitary Sewage. B) Construction Part And Fencing Of The Area: - Demolition Works Inside The Suw Building, - Renovation Of The Roof And Insulation And Insulation Of Foundations, - Renovation And Construction Works Inside The Suw Building: • Renovation And Renovation Of The Suw Building, • Renovation Of Rooms (Execution Of Plaster, Installation Of Ceramic Tiles On Walls Of The Suw Building, Installation Of Ceramic Floor Tiles, Drainage), • Floor In The Suw Building - Replacement Of Windows And Doors, - Facade Of The Suw Building, Including Building Insulation And Replacement Of Gutters, - Replacement Of The Fence And Entrance Gate, - Construction Of The Foundation Slab For Technological Devices In The Suw Building (Filters, Aerator, Retention Tanks), - Construction Of Technological Channels In The Suw Building. C) Electrical Installation Part - Disassembly Of Existing Installations In The Suw Building, - Installation Of A New Electrical Installation Of The Suw And Lighting Installation Outside And Inside The Suw, As Well As A Control Installation For The Designed Devices, - Installation Of An Equipotential, Lightning Protection And Monitoring Installation, - Installation Of A Power Generator With Including Automatic Start After A Failure Of The Facilitys Power Supply From The Power Grid And Stopping After The Power Supply Returns From The Power Grid. - Installation Of A Photovoltaic Installation On The Ground For The Own Needs Of The Water Intake And Treatment Station In Jabłówko, Consisting Of 100 Pcs. Pv Modules With A Unit Power Of 500 Wp.D) Installation Part In The Field Of I&C - Installation Of A Control System Based On A Plc System. - Installation Of The Scada System. - Monitoring Of Suw Facilities. - Installation Of An Ethernet Module For Remote Monitoring And Remote Control. - Grounding Installation, Installation Of Level And Pressure Sensors. E) Part Concerning Land Development - Construction Of A Hardened Surface In The Station Area (Access Roads To The Wwtp Facilities). - Greenery Development. 3) A Detailed Description Of The Subject Of The Order Is Included In The Following Documents Constituting Annexes To The Swz: A) Construction Design B) Technical Designs In The Following Industries: - Construction, - Central Heating, - Electricity And Instrumentation And Instrumentation (Control, Measurement And Automation Equipment), - Sanitary, - Photovoltaics .C) Technical Specification For The Execution And Acceptance Of Works (Hereinafter Referred To As Stwior Order Documents)4) Warranty. The Ordering Party Requires At Least 36 Months Warranty (In Accordance With The Civil Code) For Work Performed Related To The Subject Of The Order. The Warranty Is A Criterion For The Evaluation Of Offers And Is Subject To Evaluation, The Contractor Will Be Obliged To Specify The Length Of The Warranty In The Offer Form Constituting An Annex To The Swz.5) If The Design Documentation Would Indicate Names, Trademarks, Patents Or Origins, Functional Features For Certain Materials Or Devices The Materials Or Devices Offered By The Contractor Must Meet The Requirements Set By The Ordering Party And Constitute Only A Quality Standard Of The Subject Of The Order. The Term Minimum Quality Parameters And Functional Features Means That The Ordering Party Understands The Requirements For Materials Or Devices Contained In Publicly Available Sources, Catalogs And Manufacturers Websites. The Use Of Exemplary Manufacturers Names Is Only Intended To Clarify The Level Of Expectations Of The Ordering Party In Relation To A Specific Solution. By Indicating The Designation Of A Specific Manufacturer (Supplier) Or A Specific Product In The Description Of The Subject Of The Order, The Ordering Party Also Allows Equivalent Products With Quality Parameters And Functional Features At Least At The Level Of The Parameters Of The Indicated Product, Thus Accepting Every Product With The Indicated Or Better Parameters. The Burden Of Demonstrating This Compliance Will Rest With The Contractor At The Stage Of Order Execution.6) If The Subject Of The Order Is Described By Reference To Standards, Technical Assessments, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Section 1 Point 2 Of The Public Procurement Law And Art. 101 Section 3 Pzp - The Ordering Party Hereby Indicates That It Allows Equivalent Solutions Described In The Procurement Documents.