Sodium Vapor Lamp 150W E-40 Tubular, Sodium Vapor Lamp 250W E-40 Tubular, 100W Led Luminaire, Produced In Injected Aluminum Alloy Under High Pressure, Led Board With Variation Between 30 To 240 W, Pmma Lenses, A Power And Frequency From 90V To 305 V +/- 10%; 50/60, Irc Greater Than 70, Color Temperature Of 5000K Or More 10%, Ip 66 Total Housing And Optical Body/Ik08 Impact Resistance, Relative Humidity Between 10 To 95%, Useful Life Of 102,000 Hours Or More, Made In Highly Durable And Thermally Resistant Silicone, Insulated Copper Connection Cables To Withstand Voltage Pulses And High Temperatures, With Terminals For Connection, Electrostatic Polyester Painting In Zinza Color, Luminaire Supplied With Driver, For Controlling And Turning On The Leds, As Per Nosmas Nbr 16026:2012 / Nbr Iec 61347-2-13, Luminaire Formed With Anti-Surge Protection Device Independent From The Driver, Protecting All Components In Case Of Voltage And Current Surge In The Electrical Network, Supplied With Swivel Socket (Base) 360°, For Coupling And Connection Of The Photocontrol Relay, 200W Led Luminaire, Luminaire Provided With Anti-Surge Protection Device (Dps) 10Ka Independent Of The Driver, Supplied With Socket (Base) For Coupling And Connection Of The Photocontroller Relay (, Base For Photoelectric Relay Metal Rod, Fl Bivolt Photoelectric Relay, Blue, Body/Base Polypropylene Stabilized Against Uv Radiation, Cover Polypropylene Stabilized Against Uv Radiation, Tinned Brass Fitting Contacts, Electronic Operating Principle, Instant Activation, Fail-Off Failure Behavior (Lamp Off In Case Of Failure), Load Contact Normally Closed (Nf) Or Normally Open (Na), Protection Against Voltage Surges 4Kv, Nominal Voltage 127-220V, Frequency 60Hz, Load Capacity At 127Vac 1000W, 1200Va, At 220Vac 1000W , 1800Va, Operating Limit -5°C To 50°C, Operating Range On 5 To 15 Lux, Off Up To 30 Lux, Off/On Ratio 1.5 To 3, Average Consumption ≪ 1.0W, Ip65 Degree Of Protection, Weight 0.074Kg, And 5-Year Warranty, Flame Retardant And Flash Fire Pants - Size L, Flame Retardant And Flash Fire Shirt - Size L - Flame Retardant 100% Cotton Fr Fabric , Grammage 290 G/M², Atpv 11, 3 Cal/Cm²; With Green And White Reflective Strips; Front Button Closure With View; Long Sleeves With Button Closure At The Cuff; Upper Left Pocket 13Cm Wide And 14Cm High, Features Lid, Button Closure; Reinforced Bar Tack Seams At Vulnerable Points; Reinforced Stitching With Flame Retardant Thread., Flame Retardant And Flash Fire Long Sleeve T-Shirt - Size L - Cotton Linen Fabric With Flame Retardant Treatment, High Protection Factor Atpv 15, 2 Cal/Cm2, Class 2, Weight 240 G/M2, Plain With 1 Left Side Pocket, Crew Neck, Mesh Cuffs, Developed Against Risks, Boots / Combat Boots For Electrician In Pair -, Galvanized Arm 3 Mts. Curved With Shoe, Ep 3.0 Mm, Made Of Sae 1010/1020 Steel, Hot Dip Galvanized According To Nbr 6323, Fixing, Pair Of Circular Belt 190 Mm In Hot Dip Galvanized Steel Without Screw, Type C, The Belt Must Be Coated With Zinc Through The Hot Immersion Process, According To Nbr 6323/07. The Minimum Coating Thickness Must Comply With Table 1 Of Nbr 8158/83. For Placement On Circular Power Poles, Pair Of 240 Mm Circular Strap In Hot-Dip Galvanized Steel Without Screw, 250 Mm Screw Or Dev Screw
