Bids Are Invited For Acquisition Of Materials, Furniture And Equipment That Will Be Used In Proinfância, Located In The Geraldo Veloso Neighborhood, Par Commitment Term Nº 201601334 – Fnde, Signed Between The Municipality Of Formiga – Mg And The National Education Development Fund – Fnde

Split Air Conditioning Unit 12,000 Btu´S. Split High Wall Model. Cycle Type: Hot/Cold. Color White. Ence: A. Air Filter: Anti-Bacteria. Air Flow: At Least 500 M³/H. Comes With Remote Control. Thermostat: Digital. Functions: Sleep And Swing.Voltage: 220V. The Equipment Must Have Inverter Technology And Present A National Energy Conservation Label – Authorized By Inmetro. The Air Conditioning Unit Must Be Accompanied By The Instruction Manual In Portuguese For The Use, Conservation And Maintenance Of The Equipment, 30,000 Btus Split Air Conditioning Unit. Split High Wall Model. Cycle Type: Hot/Cold. Color White. Ence: At Least D. Air Filter: Antibacteria. Air Flow: At Least 1,150 M³/H. Comes With Remote Control. Digital Thermostat. Functions: Sleep And Swing. Voltage: 220V. The Equipment Must Have Inverter Technology And Present A National Energy Conservation Label – Authorized By Inmetro. The Air Conditioning Unit Must Be Accompanied By An Instruction Manual In Portuguese For Use, Care And Maintenance Of The Equipment., 4-Seater Swing With Main Structure In Carbon Steel, Suitable For Children Aged 3 And Over. Main Structure In Carbon Steel With Top Steel Crossmember Of 2.5”X 3.00Mm. 2” X 2.65Mm Steel Central Foot. Galvanized Steel Support Chain, 5.00Mm Thick. Movement/Articulation System Using ½” Diameter Steel Screws, With Movement On Shielded Ball Bearings Packed In A Metallic Bushing That Allows Replacement. Fixing Screws To Parabolt Type Base In Galvanized Steel, Measuring 3/8” Carbon Steel Rocking Chair With 1” Tube With 2Mm Wall, With Seamless Backrest Between The Seat. Equipment Must Have A Flange With 4 (Four) Holes In Each Support Foot To Allow The Equipment To Be Fixed Using Screws Under The Concrete Base. All Equipment Must Be Assembled/Welded Using A Mig/Tig Process, Providing A Finish Free Of Edges And Burrs. The Equipment Must Receive Metallic Surface Treatment Through The Phosphating Process. The Painting Must Be Electrostatic Powder, In Polyester Paint. In Various Colors. All Tubes Used In The Manufacture Of The Equipment Must Have Their Top Closed With A Welded Metal Cap, And The Use Of Plastic Ferrules For This Finish Is Prohibited. Dimensions: Width: 180 Cm. Height: 220 Cm. Length: 440 Cm. Tolerance + / - 5%., Industrial Planetary Mixer, With A Capacity Of 20 Liters, Manufactured In Accordance With The Regulatory Standard Of The Ministry Of Labor And Employment, Nr 12 – Safety At Work In Machines And Equipment. Tolerance Dimensions: Height: 764 Mm. Length: 517 Mm. Width: 374Mm Tolerance: +/- 15%. Structure Or Support For The Engine In Steel, With A Fine Finish In Epoxy Paint. Tub In Stainless Steel. Helical Gear System. With Three Speed Levels. Progressive Speed Change System With Variator Pulley. With Spiral Beater, Paddle Beater, Globe Beater And Ingredient Slide. Safety Grid That Turns Off The Machine When Lifted. Container Protector That Provides Operational Safety. 15Minute Timer. Protection And Initial Speed ​​“Anti-Flash. Accessories Included. Voltages (V): 230/60/1.Motor: ½ Hp. Sizing And Robustness Of The Wiring, Plug And Electrical Connectors Compatible With The Operating Current. Power Cord