Bids Are Invited For Acquisition Of Furniture To Meet The Needs Of Schools In The Municipal Network And Also The Departments Of Finance, Planning And Management And Public Security Of The Municipal City Of Araxá-Mg.
Bids Are Invited For Acquisition Of Furniture To Meet The Needs Of Schools In The Municipal Network And Also The Departments Of Finance, Planning And Management And Public Security Of The Municipal City Of Araxá-Mg.
Steel Cabinet With 2 Doors And 4 Shelves Technical Specification: Approximate Measurements 0, 90X0, 40X1, 98. - Structure In 22 Folded Steel Sheet; - Shelf In 22 Steel Sheet With Double Folds Of 25 Opening Doors Made Of 22 Folded Sheet Metal With Central Reinforcement In Omega, Equipped With A Lower And Upper Locking System, Chrome Handle, Tamper-Proof Cylinder Lock And Two Keys; - Finished In Electrostatic Epoxy Powder Paint, In Gray Color., 98. - Structure In 22 Folded Steel Sheet; Shelf In 22 Steel Sheet With Double Folds Of 25X15mm With Central Reinforcement In Omega Supported On The Sides On Metal Racks With Adjustment Every 50Mm In A Number Of 2 Per Cabinet; - Opening Doors In 22-Fold Sheet Metal With Central Reinforcement In Omega, In Gray. (Exclusive Dispute For Me And Epp), Steel Cabinet, 2 Doors, 3 Internal Reinforcements, Printed Handle On The Door Itself With Pvc Finish, Shelf Adjustment System, 1 Fixed And 3 Movable, With Yale Type Key, Made Of Sheet Metal Steel 26 For The Body And Steel 24 For The Top And Shelves, With Electrostatic Powder Painting, Measuring 1500Mm High X 850Mm Wide X 350Mm Deep, Steel Filing Cabinet With 4 Drawers With Key Technical Characteristics: - Approximate Measurements (Height Width X Depth): 1.30Mx 0.47M - Yale Type Cylinder Lock, With Two Keys; - Label Holders In All Drawers, Made Of Chromed Steel; - Chrome Metallic Handles; - Drawers With Sliding System; - Plates: Body-Plate 22; Drawers - Plate 20; Internal Structure And Telescopic Trolley – Plate 16; - Gray Color., White Crib With Rails With Approximate Measurements: Height 860Mm Height X 1335Mm Width X 680Mm Depth. Painting And Coating Uv Printing, Ff Paper Coating And Plastic Coating. Approximate Measurements: Headboard Made Of Mdp: 857X680x15mm; Ballast, Made From Mdf: 1302X57x18mm; Of The Travessa, Made In Mdf: 594X70x9mm; The Amount Of The Grid, Made In Mdf: 1300X56x25m; From The Grid Stake, Made Of Mdf: 633X56x12mm. Finishing The Headboards With Pvc Edges, Finishing With Uv Paint. Raw Material Mdp And Mdf. Product With Inmetro Seal., Adult Chair With Seat And Back In Polypropylene. Seat With Minimum Measurements 400X460mm (+/-5%), Seat/Floor Height 460Mm Approximately. No Holes Fixed By Screws. Backrest With Minimum Measurements 400X360mm (+/-5%), Compusador And Manufacturers Mark In High Relief, Fixed By Rivets. Seat Base And Interconnection To The Back In A Long 16X30mm Ob Tube, Covered By The Backrest, A Horizontal Bar For Support Under The Seat In A 5/8 Tube. Reinforced Structure With 02 (Two) Side Columns In Plastic Material And Feet In Plastic Material, Reinforced Preventing Corrosion And Wear. 1 (One) Horizontal Reinforcement Bar In All Oblong Measuring 16X30mm With A Thickness Of 1.5Mm Fixed Between One Of The Columns That Connects The Seat Base To The Footrests. The Entire Metal Structure Is Manufactured From Industrial Steel Tubes Treated With Sets Of Chemical Baths For The Protection And Longevity Of The Structure And Welded Using The Mig System. Office Chair - Directors Armchair; Type: Swivel; Backrest: Medium; Armrests: With Armrest Support; Seat/Back: Double Shell
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
