Tenders Are Invited For Delivery Of A Bus Car Adapted To Transport Detained Persons For The City Guard In Żyrardów

The Subject Of The Order Is The Delivery Of One New, Non-Repairable, Silver Metallic Bus Type Vehicle, Marked, With A Body Adapted To Transport 7 People, Including 2 Included People. The Vehicle Must Meet The Requirements For Emergency Vehicles Specified In The Regulation Of The Minister Of Infrastructure Of October 27, 2002 On The Technical Conditions Of Vehicles And Their Necessary Equipment (Journal Of Laws Of 2016, Item 2022). A Municipal (Municipal) Guard Car Should :1) Have A Silver Body Color; 2) Be Marked With: A) A Distinguishing Reflective Strip In The Form Of A Three-Tier Checkerboard Of Yellow And Navy Blue, B) A Navy Blue Strip Placed Below The Strip Referred To In Point (A). A, With A Width Of Not Less Than 30 Cm And No More Than The Lower Edge Of The Door, C) A Reflective Yellow Inscription Municipal Guard Placed On The Strip Referred To In Point B, On Both Sides Of The Vehicle, On The Front Doors And At The Rear Vehicle, D) An Illuminated Inscription Municipal Guard In Navy Blue Or Black On A White Background, Placed On The Roof Of The Vehicle, E) An Emblem With Dimensions Of Not Less Than 30 X 22 Cm Placed On Both Sides Of The Vehicle, Behind The Front Doors; The Emblem Should Be Identical To The Emblem Of The Commune Referred To In The Regulations Issued Pursuant To Art. 21 Section 2 Of The Act Of August 29, 1997 On Municipal Guards (Journal Of Laws Of 2021.1763, Consolidated Text). On The Vehicle Referred To In Point 1 And 2 May Be Placed At The Rear Of The Sides Of The Vehicle, Symmetrically On Both Sides, And At The Rear Of The Vehicle Other Markings Indicating Affiliation To A Specific Organizational Unit Of The Municipal Guard Or The Contact Telephone Number Of A Given Guard; Markings And Contact Telephone Number Should Be Yellow. Technical Requirements Diesel Engine Meeting At Least The Euro 6 Exhaust Emission Standard. Displacement Not Less Than 1900 Cm3 (According To Data From The Certificate Of Conformity). Vehicles Equipped With: - Abs System - Emergency Brake Assist System - Esp Lane Control System - Led Daytime Running Lights - Full Led Lights - Central Locking - Drivers Airbag - Side Mirrors Heated And Operated, Electrically Foldable - Electrically Operated Front Windows - Drivers Seat With Height Adjustment, Lumbar Support And Armrest - Air Conditioning Manual - Reinforced Battery - Glazing Of The First Segment Behind The Driver - Radio Player - Set Of Rubber Mats - Fire Extinguisher - First Aid Kit - Warning Triangle - Jack - Wrench For Wheel Mounting Bolts. Vehicle For Transporting Captured Persons. Passenger Drivers Cabin, Compartment For Transporting Officers, Made Development Of The Interior Of The Vehicle Enabling The Transport Of 2 Captured Persons. Number Of Seats In The First Row Of Seats (Including The Driver): 3. In The Second Row Of Seats: 2, In The Compartment Designated For The Transport Of Included Persons, Number Of Seats. The Permissible Total Weight Of The Vehicle Does Not Exceed 3,500 Kg. The Vehicle Is Equipped With External Doors: 1) Front Side Doors, Swing Doors, Glazed On Both Sides Of The Vehicle, 2) Side Sliding Doors, Glazed, Located On The Right Side Of The Body, 3) Rear Double-Leaf Doors, Glazed With A Heated Window , Opening Sideways, Equipped With Opening Limiters, Doors With Locking Of The Wing Position, At Least At An Angle Of 90O. 4) Additionally, The Contractor Will Install A 12V Installation In The Vehicle Enabling The Connection Of A Motorola Car Radio Station And Will Install An Antenna Together With An Installation Operating At A Frequency Of 147.375 Mhz. The Interior Of The Vehicle Must Consist Of Three Compartments: Compartment I - Drivers Cabin, Compartment Ii - Compartment For Transporting Officers, Compartment Iii - Compartment For Detained Persons. The Vehicle Must Be Adapted To Transport A Total Of At Least 7 Persons. Compartment I - 3 (Three) Officers, Including The Vehicle Driver, Compartment Ii - 2 (Two) Officers, Compartment Iii - 2 (Two) Captured Persons. Technical Requirements For The Bodywork Compartment I. Compartment I Must Be Equipped With Additional Led Lighting, At Least 2 Warm Light Points. The Location Of The Light Sources Must Enable The Driver And The Administrator To Read, Prepare Documentation, Etc. The Lighting In Compartment I Must Be Turned On And Off Using Control Switches Installed In A Place Easily Accessible To The Driver And The Administrator. Technical Requirements For The Construction Of Compartment Ii. Compartment Ii Must Be Adapted For The Transport Of 2 Officers. Technical Requirements For The Development Of Compartment Iii. Compartment Iii Must Be Separated From Compartment Ii By A Permanent Vertical Partition Filling The Entire Cross-Section Of The Vehicle. The Partition Should Have A Window Made Of Material Enabling Visibility Into Compartment Iii, With Minimum Dimensions Of 400X600 Mm. Compartment Iii Must Be Secured From The Rear Door Side With A Grate That Opens In Such A Way As To Enable The Entry And Exit Of Detained Persons. The Grate Should Be Equipped With A Handle For Opening And Closing And A Lock Should Be Installed To Prevent The Grate From Being Opened By Captured Persons. In Compartment Iii, Two Seats Should Be Installed, Adapted To The Transport Of Restrained Persons, Rear-Facing, Equipped With Approved Seat Belts. Additionally, Each Seat Must Be Equipped With A Handle For Fastening Handcuffs. The Seats (Seat And Backrest) Must Be Made Of Hard, Durable And Waterproof Plastic. The Structure Of The Seats Must Be Reinforced With A Metal Frame Attached To Permanent Body Elements, E.G. (Pillars, Longitudinal Reinforcements) With Stainless Steel Screws. The Side Walls, Ceiling, Floor And Partitions Must Not Have Any Free Spaces Between The Individual Elements Of The Compartment And Must Be Tightly Connected, In A Way That Allows Rinsing With Running Water. The Floor Structure Must Be Profiled In A Way That Ensures Gravity Drainage Of Water Outside The Vehicle. The Method Of Water Drainage Must Ensure That It Does Not Penetrate The Structural Elements Of The Base Vehicle And The Bodywork. The Floor Is Covered With An Anti-Slip Carpet, Tightly Connected To The Lining Of The Side Walls, The Side Walls And The Ceiling Are Made Of Non-Absorbent Materials. Application Of A Water-Impermeable Layer Is Required. Inside Compartment Iii, A Roof Fan Should Be Installed, Operating In The Supply And Exhaust Mode, Ensuring Air Exchange In The Compartment. The Fan Must Be Turned On/Off Using A Switch Installed In Compartment I In A Place That Guarantees Easy Operation By The Vehicle Driver Or Administrator. The Fan On The Inside Of Compartment Iii Must Be Protected With A Cover, The Cover Must Be Resistant To Mechanical Damage, And Its Structure Must Prevent Disassembly Without The Use Of Tools. Led Lighting Must Be Installed On The Ceiling Of Compartment Iii. Lighting Installation Locations Must Ensure Uniform Illumination Of The Compartment. Each Lamp Must Be Protected Against Damage With A Transparent, Colorless Cover Or Lampshade That Cannot Be Removed Without The Use Of Tools.