Bids Are Invited For Acquisition Of Agricultural Equipment For The Municipality Of Engenho Velho/Rs, With Its Own Resources And From Fpe Agreement No. 2541/2023 - Popular Consultation 2018/2019 Cdtv 1068/2023 (Acquisition Of A Mower) And Fpe Agreement No. 1583/2023 - Popular Consultation 2022/2023 Cdtv Nº 0625/2023 (Acquisition Of A Mower And Acquisition Of Two Metallic Agricultural Trailers).

Mower. Minimum Technical Characteristics: - New;- Mower With A Working Width Of At Least 2 Meters, Minimum 5 Heavy Discs, With 2 Twisted Knives, Self-Sharpening, With Wires On Both Sides;- Protective Canvas System, Foldable For Transport ;- Spring Cutting Bar Relief System;- Must Have Cutting Angle With Minimum Variation Between + 35º And 22º ;- Average Windrow Width Of 1.40M;- Maximum Transport Width Of 1.70M;- Folding For Opening And Closing Powered By Hydraulic Piston And Automatic Locking System;- Minimum Weight Of 460 Kg;- System With Suspension Spring For Soil Adaptation;- High Cone On External Disc;- Suspended Windrow Wheel;- Replaceable Sliding Shoes;- Driven By Tdp At 540 Rpm;- Must Have Cutting Bar Disengagement System, In Case Of Impacts With Physical Barriers.- Parts Manual And Operation Manual, Which May Be In Digital Form;- Minimum Warranty Of 12 Months., Agricultural Trailer Metal Tipper. Minimum Technical Characteristics: - Hydraulic Piston Drive In Three Stages;- Minimum Load Capacity Of 6 Tons;- Minimum Volumetric Capacity, May Be With Over Box, Of At Minimum 8 Cubic Meters;- If It Has Over Box, Be Removable, With Minimum Thickness Of 2.75 Mm Thick;- Minimum Bucket Length Of 3500 Mm And Minimum Width Of 1950 Mm;- Bucket Bottom With Sheets Of At Least 3.25 Mm Thick In Steel Astm A 36 Or Sae 1020; - Sides Of The Bucket With Sheets Of At Least 2.75 Mm Thick In Steel Astm To 36 Or Sae 1020;- Front Of The Bucket With Sheets Of At Least 3 Mm Thick In Steel Astm To 36 Or Sae 1020;- Bucket Must Have At Least Two U-Shaped Vertical Reinforcements Of 40 Mm In Height, 90 Mm In Length And 4 Mm In Thickness; Mm In Distance Each, Made Of U Sheet 90 Mm Wide And 30 Mm High With A Minimum Thickness Of 2 Mm, Steel Thickness Astm A 36 Or Sae 1020;- Rear Cover With Automatic Vertical And Manual Horizontal Opening, With Locks;- Lid Must Have A Frame Around It With A Minimum Of Two Additional U-Shaped Vertical Reinforcements With A Minimum Height Of 30 Mm, 90 Mm Wide And 2 Mm Thick;- Electrostatic Powder Painting Or P U;- Reinforced Chassis With A Simple And Resistant U-Shaped Structure Of At Least 200Mm In Height, 57Mm In External Width, With Sheet Metal At Least 6.35Mm Thick;- Axle Ends With At Least 60Mm In Diameter:- Tandem Wheelset With 15.5 Horizontal Displacement;- New 400/60 High Flotation Tires, With At Least 16 Plies;- Adjustable And Movable Support Foot;- Access Ladder To The Front Bucket;- Minimum Acceptable Weight Of 1400 Kg Without Load;- Must Be In Line Factory Production Manual;- Parts Manual And Operations Manual, Which May Be On Media Or Paper;- Must Have