Bids Are Invited For Hiring An Engineering Company Under The Contract For Lowest Overall Price Regime For The Execution Of The Renovation And Expansion Project Of The Ceae (State Center For Specialized Care) In The Municipality Of Jequitinhonha, With Full Supply Of Equipment, Materials And Labor, According To The Descriptive Memorial, Budget Spreadsheet, Basic Project And Other Annexes Included In This Notice.

Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Conventional Location Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_10/2018, Demolition Of Perforated Block Masonry, Manually, Without Reuse. Af_09/2023, Removal Of Doors, Manual Removal Of Wooden Or Metallic Frame, With Reuse, Including Removal And Stacking, Excluding Transportation And Removal Of Non-Reusable Removed Material, Removal Of Crockery, Manual Removal Of Stone Partition (Marble, Granite, Slate, Marble, Etc.), Including Tear In Masonry, Removal Of Fastening Accessories, Spacing And Stacking, Manual Excavation For Crowning Block Or Footing (Including Excavation To Place Formwork). Af_06/2017, Preparation Of The Bottom Of A Trench With A Width Of Less Than 1.5 M (Adjustment Of The Natural Soil). Af_08/2020, Manual Trench Backfilling, With Vibrating Plate. Af_08/2023, Slim Concrete Ballast, Applied To Floors Or Radiators. Af_08/2017, Formwork And Formwork For Girder/Block With Board And Batten, Reuse (3X) (Foundation), Concrete Fck = 25Mpa, Ratio 1:2, 3:2, 7 (In Dry Cement Mass/Medium Sand / Brita 1) - Mechanical Preparation With 400 L Concrete Mixer. Af_05/2021, Cutting And Bending Of Ca-60 Steel, Diameter Of 5.0 Mm. Af_06/2022, Ca-50 Steel Cutting And Bending, Diameter 10, Diameter 12.5 Mm. Af_06/2022, Forming And Deformation Of Resin Plywood, Esp. 10Mm, Reuse (3X), Exclusive Propping, Diameter 8, Unidirectional Precast Slab, Bi-Supported, For Lining, Ceramic Filling, Conventional Joist, Total Slab Height (Filling+Cover) = (8+3). Af_11/2020_Pa, Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Fence Masonry Made Of Vertically Drilled Ceramic Blocks Of 14X19x39 Cm (Thickness 14 Cm) And Laying Mortar With Manual Preparation. Af_12/2021, Sealing Masonry Made Of Vertically Drilled Ceramic Blocks Of 9X19x39 Cm (Thickness 9 Cm) And Laying Mortar With Manual Preparation. Af_12/2021, Chapisco Applied To Masonry And Internal Concrete Structures, Using A Trowel. Mortar Trace 1:3 With Manual Preparation. Af_10/2022, Single Putty, For Receiving Paint, In 1:2:8 Mortar Mix, Manual Preparation, Manually Applied On Internal Wall Faces, 10Mm Thickness, Using Slices. Af_06/2014, Chapisco Applied To The Ceiling Or Structure, With A Notched Trowel. Industrialized Mortar With Manual Preparation. Af_10/2022, Manually Applied To The Ceiling, Using Taliscas. Af_03/2015, Sanitary Partition, Cabin Type, In Polished Gray Granite, Esp = 3Cm, Laid With Ac Iii-E Adhesive Mortar, Exclusive Hardware. Af_01/2021, Preventive Or Corrective Covering Of Surfaces Subject To Cracking, Including Structural Polyester Mesh, Exclusive Finishing Coating, Subfloor In Mortar Mix 1:4 (Cement And Sand), Applied In Dry Areas On Slabs, Adhered, Non-Reinforced Finish , Thickness 2Cm. Af_07/2021, Ceramic Floor Coating With Extra Enameled Type Plates Of Dimensions 45X45 Cm Applied In Rooms With An Area Larger Than 10 M2. Af_02/2023_Pe, Semi-Flexible Vinyl Flooring In Plates, Smooth Pattern, Thickness 3.2 Mm, Fixed With Glue. Af_09/2020, 7Cm High Ceramic Plinth With Extra Enamelled Plates Measuring 45X45cm. Af_02/2023, Ceramic Coating For Internal Walls With Extra Enamelled Plates Of Dimensions 20X20 Cm