Tenders Are Invited For Purchase Of Floating Piers

1. Name Of The Procedure: Purchase Of Floating Piers 2. The Subject Of The Order Includes The Delivery And Installation Of Floating Piers With Anchoring In The Concrete Quay. A Bridge Was Designed With Rectangular Segments, Made Of Floating Modules With A Hot-Dip Galvanized Steel Structure Supported By Displacement Elements Made Of Foamed Polystyrene. The Deck Of The Pier Is To Be Made Of Pressure Impregnated Boards. The Materials Indicated For Use On The Bridge Deck Will Be Grooved. The Deck Of The Platform Is To Be Attached To The Joists With Stainless Steel Screws. The Platform Is Designed From 3 Steel Modules With Dimensions Of 12.1 X 2.4 X 0.58 M. The Total Length Of The Main Platform Including Connectors Will Be 36.7 M. 2 Mooring Platforms 6.0 M Long And 60 Cm Wide And 2 Mooring Arms (Without The Deck) 6.0 M Long. 8 Cleat-Type Mooring Anchors Should Be Provided. The Individual Modules Of The Platform Structure Are To Be Connected Together Using Flexible Screw-Rubber Joints. To Ensure Safety, The Entire Structure Of The Platform Is To Be Limited By A Galvanized Steel Barrier With A Handrail (Entrance Should Be Provided - A Gate Type For Mooring Platforms Without A Deck, Attached To The Main Platform On The Side Of The Barrier). Additionally, It Is Planned To Install Galvanized Steel Ladders And Mooring Cleats. The Platform Is To Be Anchored Using Dead Anchors Connected To The Platform With An Approved Galvanized Anchor Chain Or In Any Other Possible Way Available On The Market. To Ensure Communication Between The Shore And The Pier Of The Platform, A Gangway With A Galvanized Steel Structure With A Beam Of 4.0 M In Length And A Width Of 2 M Is Planned. .0 M. The Assembled Platform Will Be Transported On The Water To The Place Of Construction And With The Help Of A Team Of Divers, Dead Anchors With Appropriate Chain Tension Will Be Placed Under Water. Technical Data: - Width Of The Main Platform - 2.4 M; - Length Of The Part With A Width Of 2, 4 M Including Connectors Between Platforms 0.2 M - 36.7 M;- Segment With Dimensions 12.1 X 2.4 X 0.58 M - 3.0 Pcs.;- Gangway With Dimensions 4 X 2 M - 1 Pcs.;- Mooring Platform 6 M Long, 0.6 M Wide - 2 Pcs. - Mooring Arm L-6M (Without Deck) - 2 Pcs. - Area Of ​​The Water Area Necessary For Mooring The Units 192 M², - Area Of ​​The Water Area Constituting The Approach Route To The Mooring Approx. .70 M². The Detailed Scope Of The Task Is Described In The Design Documentation Constituting Annex No. 1 To The Swz And Also Includes All Work Not Expressly Specified In These Documents, But Without Which The Order Cannot Be Performed.