Bids Are Invited For Hiring An Engineering Company For The Construction Of A Marketing Center For Products Associated With Tourism In The Municipality Of Felixlândia/Mg, In Accordance With Transfer Contract No. 920416/2021/Mtur/Caixa, According To Specifications Contained In The Terms Of Reference, Basic Project, Memorial Descriptive, Physical-Financial Schedule, Unrelieved Discriminative Budget.

Work Sign (For Civil Construction) In Galvanized Sheet N. 22, Adhesive, 2.4 Eucalyptus Or Regional Equivalent, Electricity Input, Overhead, Three-Phase, With Recessed Box, 10 Mm2 Cable And Din 50A Circuit Breaker (Concrete Post Not Included). Af 07/2020, Easel Kit For Water Measuring - Main Entry, In Weldable Pvc Dn 20 (½) Supply And Installation (Excluding Hydrometer). Af 11/2016, Unijet Hydrometer / Water Meter, Dn 3/4, Maximum Flow Of 5 M3/H, For Cold Drinking Water, Flat Clockwork, Class B, Horizontal (Without Connections)0, , Manual Excavation For Crowning Block Or Footing (Including Excavation For Placing Formwork). Af 06/2017, Manual Backfilling Of Trenches With Mechanized Compaction. Af 04/2016, Manual Excavation Of Trench For Girder Baldrame (Including Excavation For Placing Formwork). Af 06/2017, Concreting Of Footings, Fck 30 Mpa, Using Jerica Laying, Densification And Finishing. Af 06/2017, Concreting Of Pillars, Fck 25 Mpa, Using Buckets - Laying, Densifying And Finishing. Af 02/2022, Concreting Of Beams And Slabs, Fck25 Mpa, For Precast Slabs Using A Pump - Launching, Block Frame, Baldrame Beam Or Footing Using 8 Mm Ca-50 Steel - Assembly. Af 06/2017, Baldrame Beam And Shoe Using 5 Mm Ca-60 Steel - Assembly. Af 06/2017, Baldrame Beam Or Shoe Using 8 Mm Ca-50 Steel - Assembly. Af 06/2017., Thick Steel Plate, Astm A36, E 1/2 (12, 70 Mm) 99, 59 Kg/M2, Steel Ca-50, 12, 5 Mm Or 16, 0 Mm, Rebar, Waterproofing Surface With Polymeric Mortar / Acrylic Membrane, 3 Coats. Af 06/2018, Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Straight Foot, Made Of Sawn Wood, 4 Uses. Af 09/2020, Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Bridge, Thickening And Finishing. Af 02/2022., Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af 06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8 Ca-50 Steel, Unidirectional Precast Slab, Bi-Supported, For Lining, Ceramic Filling, Conventional Beam, Total Slab Height (Filling+Cover ) (8+3). Af 11/2020, Manufacture And Installation Of Steel Structure To Cover Tents In Two Waters, Manufacture And Installation Of Steel Structure To Cover Tents In One Water, Painting With Alkyd Base And Finish Paint (Synthetic Graphite Enamel) Sprayed Over Metallic Surfaces (Except Profile) Executed On Site (By Coat). Af 01/2020 P, Fence Masonry Of Vertically Drilled Ceramic Blocks Of 14X19x39 Cm (Thickness 14 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af 12/2021, Chapisco Applied To Masonry And Internal Concrete Structures, Using A Trowel. Mortar Mix 1:3 Prepared In A 400L Concrete Mixer. Af 06/2014, Single Mass, For Receiving Paint, In Mortar Mix 1:2:8, Mechanical Preparation With 400L Concrete Mixer, Manually Applied On Internal Faces Of Walls, 10Mm Thickness, Using Screeds. Af 06/2014, Wooden Mesh Composed Of Purlins For Roofs Of Up To 2 Pitches For Fibercement, Metallic, Plastic Or Thermoacoustic Corrugated Tile, Vertical Transport Included. Af 07/2019, Roofing With Steel/Aluminum Tile And 0.5 Mm, With Up To 2 Waters, Including Lifting. Af 07/2019, Cal