Request For Quotation Purchase Of A Machine For School

The Dimensions Of The Desktop (W*D) Are 600*900 Mm. The Height Of The Working Area Is 200 Mm (Up To 100 Mm Is Effective). Stationary All-Welded Design. Positioning Accuracy ±0.05 Mm. Maximum Travel Speed Up To 8000Mm/Min. The Maximum Processing Speed Is Up To 5000 Mm/Min. Drive On Eight-Wheel Drive. Square Rail Guides With Block Bearings. Working Surface Aluminum Profile With T-Slots. Spindle 2.2 Kw Of Liquid Cooling. Spindle Revolutions Up To 24,000 Rpm. Er20 Collet Standard. Ncstudio V5 3-Axis Control System (Controller Board, Pc Required For Control). Stepper Motors. Dimensions, Approximately (W*D*H) 830*1250*1450Mm Weight, Approximately 350Kg. Power Supply 220 V, 50-60 Hz. Type Of Recognized Control Codeg Code, Hpgl. Support For Software (Designer) Artcam (Recommendation, Compatibility With Most Versions). Materials Suitable For Processing Wood And Its Derivatives (Mdf, Chipboard, Fiberboard, Plywood), Plastics (Pvc, Acrylic, Rowmark, Plexiglass), Rubber, Modeling Wax, Foam Plastic, Composite Materials, Textolite, Fiberglass, Etc. Types Of Processing Cutting, Figure Cutting , Drilling, Profiling, Simple And Three-Dimensional Engraving. Completing Machines; Management System; Liquid Pump; A Basic Set Of Cutters, Collets And Other Tools; Lubrication System; Wire Calibrator; Information Medium. 1. All Performed Works, Received Goods Are Pre-Agreed With The Customer. 2. Certificates Of All Goods From The Supplier Are Required. 3. The Supplier Is Obliged To Deliver All Goods In A Timely Manner, If Necessary, Install And Present Them To The Customer. 4. Costs For Work To Be Performed And Necessary Tools, Etc. Produced At The Suppliers Expense. 5. The Supplier Gives A Written Guarantee For A Period Of 1 (One) Hour For All Received Goods And Completed Work. 6. The Supplier Verifies And Shows The Customer All The Goods Received And The Level Of Performance Of The Work Performed. 7. The Presence Of Passports Of All Received Goods Is Mandatory.