Request For Quotation Water Bath With Thermostat

Laboratory Bath-Thermostat (Thermobath) Is A High-Precision Thermostat With A Plastic Tank And A Transparent Cover. The Thermal Bath Consists Of: 4.5 L Cast Bath; Thermoblock With A Microprocessor Control System Providing The Following Parameters: - Set Point; - Maintenance; - Display Of Temperature On Light Indicators. Two Independent Stopwatches; Water Level Sensor In The Bath; Bath Lights. Thanks To The Special Design Of The Bath, Which Has Rounding, And Intensive Mixing Of Water, Temperature Uniformity Is Maintained Throughout The Entire Volume Of The Bath With An Accuracy Of ±0.1°С Ease Of Maintenance, High Accuracy Of Bath Temperature Maintenance, Minimal Dimensions Allow The Thermostat To Be Widely Used In Medicine, Biology, Etc. The Range Of The Set Temperature In The Bath, °C From Ambient Temperature +3 To 80. Accuracy Of Temperature Maintenance In The Bath, 0.5°C. Max Time To Reach The Set Temperature, 30 Min. Max Volume Of Liquid Poured Into The Bathtub, 4.5 L; Min Volume Of Liquid Poured Into The Bathtub, 3.5 L; The Number Of Degrees Of Mixing Is 2; The Number Of Stopwatches Is 2; Relative Air Humidity (At 20 °C), No More Than 80%; The Stabilization Temperature Is Higher Than The Ambient Temperature, +3°С; Timers, 99 Min; Network, 220/50 V/Hz; Power Consumption, No More Than 1.5 Kw; Overall Dimensions, 330X180x250 Mm