Bids Are Invited For Registration Of Prices For Future And Installment Purchases Of Toys To Meet The Demands Of The Secretariat Of Environment, Industry, Commerce, Services And Tourism Of The Municipality Of Pedro Afonso/To.
Bids Are Invited For Registration Of Prices For Future And Installment Purchases Of Toys To Meet The Demands Of The Secretariat Of Environment, Industry, Commerce, Services And Tourism Of The Municipality Of Pedro Afonso/To.
Toy With Galvanized Steel Structure With Epoxy Paint And Plastic Wood. Modulation: 03 Towers With 4 Plastic Wood Columns Being Two Towers, With Coverage Of 140X140 Cm One With A Height Of 2.6 Meters For Tower 1 And The Other With A Height Of 3.00 Meters For Tower 2 And Tower 3 Without Coverage With A Height Of 2 , 60 Meters With A Coconut Tree Fixed At The Right End Of The Tower Entrance, With A Platform Measuring 105X105 Cm At A Height Of 80 Cm From The Ground For Tower 1 And 120 Cm For Tower 2 And Tower 3, Fixed Through Steel Shoes At A Depth 50 Cm Long With Concrete Mortar, Connected To Each Other From Tower 1 To Tower 2 By A 2-Meter Straight Plastic Tube With Tube Fixing Flanges At Both Entrances And From Tower 2 To Tower 3 By A 90-Degree Curved Tube With Two Connection Flanges On The Towers. Tower Annexes: Tower 1 - 01 4-Step Staircase With Handrails On The Sides. - 01 Small Rope Climb With Roto Molded Plastic Frame, Accompanied By A Plastic Portal Fixed To The Tower. - 01 Straight Wavy Slide Accompanied By A Plastic Portal Fixed To The Tower. Tower 2 - 01 Double Straight Wavy Slide Accompanied By A Plastic Portal Fixed To The Tower. - 01 Climbing Discs (5 Units) Accompanied By Two Steel Bars For Support On The Sides Of The Tower Entrance. Tower 3 - 01 Rocket With Internal Staircase With A Total Height Of 3.50 Meters, Fixed To The Tower With An Entrance Portal With Two Towers With Tips And A Flange In Connection With The Tower. - 01 Snail Slide With Ladder Access With Handrail And Molded Roto Plastic Steps With A Total Height Of 2.60 Meters And A Diameter Of 1.80 Meters. - 01 Set Of Old Tower Manufacturing: - The Towers Must Be Built In The Following Way: - 4 Plastic Wooden Columns In Ita ba Color With Crosses Inside The Columns. The Columns Must Be Fixed Into The Ground At A Depth Of 50 Cm With Cement Mortar And An Iron Shoe. The Columns Will Be Tied With Galvanized Angle Iron Measuring 1 1/2X1/4 In A Frame Of 100X100 Cm At The Height Of The Platform., Toy With Galvanized Steel Structure With Epoxy Painting And Plastic Wood. Modulation: 03 Towers With 4 Plastic Wood Columns Each Tower, With Coverage Of 140X140 Cm With A Height Of 2.6 Meters For Tower 1 And 3.00 Meters For Tower 2 And Tower 3, Connected To Each Other From Tower 1 To Tower 2 Through A 2-Meter Straight Plastic Tube With Pipe Fixing Flanges At The Two Entrances And From Tower 2 To Tower 3 A 2.40-Meter Negative Walkway With Handrails And Protective Bars On Both Sides. Tower Attachments: Tower 1 - 01 Baby Ladder With 4 Steps And With Side Protection In Roto Molded Plastic. - 01 Small Rope Climb With Roto Molded Plastic Frame, Accompanied By A Plastic Portal Fixed To The Tower. - 01 Straight Wavy Slide Accompanied By A Plastic Portal Fixed To The Tower. Tower 2 - 01 Complete Caracol Slide. - 01 Climbing Discs (5 Units) Accompanied By Two Steel Bars For Support On The Sides Of The Tower Entrance. Tower 3 - 01 Curved Tube Slide With 02 90 Degree Bends And A Chamfered Outlet At The Tip Of The Slide, Fixed With A Flange At The Tube Inlet. - 01 Straight Wavy Slide Accompanied By A Plastic Portal Fixed To The Tower. - 01 Rope Climb With Roto Maoldada Plastic Frame, Accompanied By A Plastic Portal Fixed To The Tower. Manufacturing Of The Towers: - The Towers Must Be Built In The Following Way: - 4 Plastic Wood Columns In Ita ba Color
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
