1. Subject Of The Order: Implementation Of The Investment Task Titled Reconstruction And Renovation Of The Historic Cemetery Fence In Nowa Brze nica In The Design And Build Formula.2. The Scope Of The Order Includes The Development Of Design And Cost Estimate Documentation, A Program Of Conservation Works, Obtaining A Permit From The d Provincial Conservator Of Monuments Along With A Construction Permit And The Performance Of Construction And Conservation Works On The Historic Fence In The Parish Cemetery In Nowa Brze nica, Plot No. 6162, Plot No. 0008 Brze nica, Paj czno County, d Voivodeship. Characteristic Parameters Determining The Size Of The Facility: - Fence Length - 910 M - Stone Wall - Approx. 400 M (Width Approx. 0.5 M) - Brick Wall - Approx. 510 M - Fence Height From 0 .8 To 1.4 M - Brick Posts With Dimensions. 0.36 X 0.36 M Construction Works Include In Particular: - Preparatory Works; - Dismantling And Demolition Works; - Construction And Construction Works; - Finishing Works; - Conservation Works. Design Documentation Includes In Particular: - Inventory Of The Existing Condition; - Expert Opinion Construction;- Research Works, Opinions, Expert Opinions;- Record Map And Excerpt From The Land Register;- Fire Protection Expert Opinion;- Construction Design;- Bioz;- Stwiorb;- Bills Of Quantities And Investor Cost Estimates;3. Detailed Description Of The Subject Of The Order In Accordance With Art. 103 Section 2 Of The Public Procurement Law Was Described Using A Functional And Utility Program Constituting Annex No. 3 To Swz.4. Order Names And Codes According To The Common Procurement Vocabulary (Cpv):A. 34928200 - Fencesab. 34928220 - Fence Elements. 45000000-7 Construction Works D. 45100000-8 Preparation Of Land For Construction E. 45111000-8 Demolition Works, Earthworks F. 45111300-1 Demolition Works G. 45112000-5 Soil Removal Works H. 45112710-5 Works In In The Field Of Shaping Green Areas I. 45215400 - Works On Cemeteriesj. 45233200-1 Works On Various Surfaces K. 45262512 - Stonemasonry Finishing Works. 45262520 - Masonry Work. 45340000 - Installation Of Fences, Fences And Protective Equipment. 45442120 - Painting Buildings And Installing Protective Cladding. 45453000 - Renovation And Renovation Worksp. 45454100 - Renewalq. 45340000-2 Installation Of Fences, Fences And Protective Equipment. 71320000-7 Design Engineering Services P. 92522100 - Historic Preservation Services5. The Contractor Is Obliged To Complete The Order On The Terms And Conditions Described In Detail In The Important Contractual Provisions Constituting Annex No. 4 To Swz.6. The Required Warranty Period For The Completed Subject Of The Order Is At Least 36 Months From The Date Of Receipt Of The Construction Works By The Ordering Party.7. Based On Article. 558 Of The Civil Code, The Contractors Liability Under The Warranty For Defects Is Extended To A Period Equal To The Quality Warranty Period, The Length Of Which Will Result From The Content Of The Offer.8. The Purchaser Does Not Allow Partial Submissions. Reasons For Not Dividing The Contract Into Lots: - Dividing Into Lots Would Pose A Risk Of Restricting Competition, - Dividing Into Lots Would Mean Excessive Costs For The Contracting Authority, - Dividing Into Lots Would Mean Excessive Technical Difficulties, - The Need To Coordinate Activities In The Event Of Dividing Into Lots Would Jeopardize The Proper Implementation Of The Entire Contract.9 . The Ordering Party Does Not Allow The Submission Of Variant Offers.10. The Ordering Party Informs That The Submission Of An Offer Does Not Have To Be Preceded By An On-Site Visit. Despite The Fact That The Inspection Is Not Obligatory, The Ordering Party Recommends Its Implementation. 10.1. If The Contractor Intends To Make A Site Visit, This Should Be Reported To The Ordering Party In Accordance With The Communication System Adopted In The Swz.10.2. The On-Site Visit May Take Place On Working Days From 7:30 A.M. To 3:30 P.M. 10.3. The Costs Associated With Conducting An On-Site Visit Are Borne By The Contractor.11. Application Of The Equivalence Solution:7.1. Contractors May Submit Offers In Accordance With The Subject Of The Contract Or Equivalent In Relation To The Subject Of The Contract In Accordance With Art. 99 Section 6.7.2. If The Contractor Finds That The National Standards Or European Standards Or International Standards Used In The Swz And In The Annexes To The Swz May Indicate The Producers Of The Products Or Their Sources Of Origin, The Ordering Party Allows Equivalent Solutions In This Respect. 7.3. This Means That The Technical Parameters Of The Products Indicated In This Way Determine The Minimum Expectations Required By The Ordering Party As To The Quality Of The Products To Be Used To Perform The Subject Of The Contract. Moreover, In Each Case, Stating That The Description Or Feature Of The Described Product, Which May Indicate The Source Of Origin Or Manufacturer, The Contractor Is Also Entitled To Use Equivalent Products, Which Means Those With Technical Parameters Not Worse Than Those Indicated In The Swz And/Or In The Annexes To The Swz. 7.4. It Is Also Allowed To Demonstrate This Equivalence With Standards Equivalent To Those Indicated In The Opz Or Generally Applicable. When Selecting Equivalent Materials, The Contractor Is Also Obliged To Ensure That The Indicators Specified In The Opz Are Achieved And The Delivered Equivalent Order Item Is To Be Comparable In Price To The Equipment Replaced From The Opz.12. The Ordering Party Does Not Require Any Means Of Evidence In Question.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
