Bids Are Invited For Acquisition Of Outdoor Gym Equipment And Toys To Be Installed In The Rural Neighborhoods Of Pessegueiro And Vidinha In The Municipality Of Pouso Alto, With Financial Resources From A Special Transfer Through Resolutions 12/2023 And 21/2022 - Segov.

Individual Walking Simulator – Technical Description: Material: Carbon Steel Tubes Of At Least 2’ ½ X 2 Mm; 2’ 1’ ½ X 1.50 Mm. Carbon Steel Plates Of At Least 4.75 For The Equipment Fixing Point And 1.9 Mm For The Foot Support Plate. Schedule 80 Drawn Carbon Steel Tube (73 Mm X 58.98 Mm). Use Solid Pins, All Bearings (Double Bearings). Welding: Mig. Parabout Anchor Of At Least 3/8’ X 2 ½’, Zinc-Plated Screws; Injected And/Or Rubberized Plastic Finishes. High-Fixation 3M Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data. Painting: Treatment With A Phosphate-Based Submerged Bath. Electrostatic Powder Deposition System With Colored Thermo-Hardening Polyester Resin Protective Film. Height: 1160 Mm; Front: 802 Mm; Side: 840 Mm; Area: 7.96 M2; Weight: 37.6 Kg, Individual Riding Simulator – Technical Description - Material: Carbon Steel Tubes Of At Least 2.½” × 2 Mm; 2” × 2Mm; 1.½” × 3 Mm; 1.½” × 1.50 Mm; 1” × 1.50 Mm. Flat Bar At Least 2.½” × ¼”; 3/16” × 1.¼”. Drawn Carbon Steel Tube 2” × 5.50 Mm Schedule 80 (60.30 Mm × 49.22 Mm). Carbon Steel Plates Of At Least 4.75 Mm For The Equipment Fixing Point And 2 Mm For The Printed Bench With Rounded Edges. Solid Pins, All Bearings (Double Bearings), Round Flexible Rubber Stops (53 Mm × 30 Mm) Are Used. Welding: Mig, Parabolt Anchor At Minimum?” × 2.½”, Zinc Plated Screws, Acetal Bushing, Washers And Locknuts. Built-In Internal Plug In Injected Plastic Measuring At Least 2.½” And 2” With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. High Fixation Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data. Painting: Treatment With A Phosphate-Based Submerged Bath. Electrostatic Powder Deposition System With Colored Thermo-Hardening Polyester Resin Protective Film. Height: 1175 Mm; Front: 546 Mm; Side: 1029 Mm; Area: 3, 11 M²; Weight: 23 Kg, Individual Rowing Simulator – Technical Description - Material: Carbon Steel Tubes Of At Least 2’ X 2 Mm; 1’ ½ X 3 Mm. Flat Bar 3/16’ X 1 ¼’. Drawn Carbon Steel Tube 2’ X 5, 30X49, 22). Carbon Steel Plates Of At Least 4.75 Mm For The Equipment Fixing Point And 2 Mm For The Bench And Back With Dimensions Of 335 Mm X 315 Mm And Printed With Rounded Edges. Solid Pins, Round Flexible Rubber Stops (53Mm X 30Mm) Are Used. Welding: Mig. Parabout Anchor Of At Least 3/8’ X 2 ½’, Washers And Fastening Nuts. Built-In Internal Plug In Injected Plastic Measuring At Least 2’ With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. Single Tube With Diameter Reduction, Eliminating Welded Seams, In Hand Grip. 3M Destructive Reflective Sticker With High Fixation With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data. Painting: Treatment With A Phosphate-Based Submerged Bath. Electrostatic Powder Deposition System With Colored Thermo-Hardening Polyester Resin Protective Film. Height: 805 Mm; Front: 732 Mm; Side: 913 Mm; Area: 3, 30 M²; Weight: 21.5Kg, Double Leg Pressure – Technical Description – Material - Carbon Steel Tubes Of At Least 4’ X 3 Mm; 3’ ½ X 3.75; 2’ 2’ X 3 Mm; D Carbon Steel Sheets