Corrigendum - Quotation Are Invited For Apina Condensate Drain Tank Repair Including Supply Of Material In L1

Quotation are invited for Apina Condensate Drain Tank Repair including Supply of Material in l1 Apina Condensate Drain Tank R 1032400430 APINA CONDENSATE DRAIN TANK REPAIR INCLUDING SUPPLY OF MATERIAL IN L1 1 ITEM-00001 APINA CONDENSATE DRAIN TANK REPAIR INCLUDING SUPPLY OF MATERIAL IN#JEBEL ALI POWER STATION.TANK SIZE 5X5X2MPERIOD OF WORK:15 DAYS AF TER GETTING THE POWARRANTYONE-YEAR WARRANTY IS REQUIRED FOR THIS JOBSCOPE OF WORKTHE CONTRACTOR SHALL VISIT THE SITE AND MAKE HIMSEL F FULLY FAMILIAR WITHTHE WORK SCOPE, PLANT ACCESS, FACILITIES, COMPLEXITIES, SAFETY MEASURESETC., BEFORE HE SUBMITS HIS BID.TO GET A PTW, HWP CONTRACTOR HAS TO SUBMIT RISK ASSESSMENT FORMS ANDMETHOD STATEMENT/REPAIR PROCEDURE, WPS, PRIOR TO START THE WORK.MOBILIZE THE LABOR, EQUIPMENT, TOOLS, ETC. WITH IN 24 HRS. AFTER GETTINGTHE CONFIRMATION EMAIL FORM DEWA ENGINEER.THE MOBILIZATION WILL AT O NE TIME ONLY.THE CONTRACTOR UPON RECEIVING THE WORK PERMIT SHALL FIRST ENSURE A SAFEWORKING CONDITION BY CHECKING THE LINE ISOLATION , CONFINED SPACE ANDPROPER ISOLATION OF THE SYSTEM.TO CARRY OUT THOROUGH INSPECTION OF TANK.PREPARATION AND SUBMITTAL OF REPAIR PROC EDURE.MOBILIZATION OF REPAIR CONSUMABLE MATERIAL, TOOLS MANPOWER AND RIGGINGTOOLS (TESTED AND CERTIFIED).THERE ARE THREE-LINE ITEMS IN THIS PR AS MENTIONED BELOW, LINE ITEM2&3SHALL BE INVOICED BASED ON THE ACTUAL PANEL USED DURING REPAIR JOB.1- THE TANK IS LEAKING , AND DEWA WANT TO REPAIR THE TANK COMPLETELYINCLUDING THE REQUIRE MATERIAL, FASTENERS, GASKETS, CAPS, MANHOLE ETCBASED ON THE SITE CONDITIONS.CUT THE GRP PIPELINES/ REMOVE THE VALVES AS PER REQUIREMENT.REMOVE THE NUT BOLT CAPS AND OPEN THE PANELS BOLTS. (KEEP ALL THE ITEMSSECURED AND REPLACE IF ANY DAMAGE, CORRODED OR MISSING ITEM)REMOVE THE SUPPORTS STUD FROM INSIDE AND OUTSIDE.REMOVE THE OU TSIDE INSULATION SHEETS.REMOVE THE LEFT / RIGHT/ BOTTOM / TOP PANELS AS PER REQUIREMENT TOREPAIR THE TANK.REMOVE THE OLD GASKETS.CLE AN AND INSPECT THE PANEL FLANGES.CLEAN THE SEATING AREA OF THE PANELS.INSPECT THE PANELS THOROUGHLY AND INFORM DEWA ENGINEERS FOR MU TUALINSPECTION.PROVIDE THE COMPLETE INSPECTION REPORT INCLUDING THE PANELS TO BEREPLACED.REPLACE THE PANELS AS PER REQUIREMENT (BASE D ON THE INSPECTION REPORT).MAKE EVERYTHING READY AND START THE ASSEMBLY OF THE BOTTOM PANELS.REPLACE THE GASKET WITH NEW SAME TYPE OF GASKET.CHANGE THE NUT BOLT, ANGLE/FLANGE BASED ON THE REQUIREMENT.TORQUE TIGHTEN THE NUT BOLTS AND PROVIDE THE MISSING BOLT CAPS BASED ONTHE REQUIREMENT.ASSEMBLE THE TANK COMPLETELY AND PROVIDE THE INSIDE SUPPORTS SAME AS ITWAS PRIOR TO DISMANTLED THE TANK.CHAN GE THE INSIDE SS SUPPORT RODS OR PVC PIPE SUPPORT IN CASE OFREQUIREMENT.PUT THE OLD INSULATION SHEETS BACK.SECURE THE INSPECTION VIE W GLASS AND INSTALL BACK IN THE SAME LOCATION.REMOVE THE LEVEL GAUGE AND PUT BACK.CONNECT/ JOIN THE GRP PIPELINES / VALVES WHICH REM OVED/ CUT IN START ANDREPLACE THE GASKET. DEWA WILL ARRANGE TO FILL THE TANK FOR LEAK TEST.CHECK THE LEAK, IF ANY LEAK NOTICED CONTR ACTOR SHALL FIX IT WITHOUT ANYADDITIONAL COST.ONLY WELL EXPERIENCED MANPOWER TO BE DEPUTED FOR THIS WORK.THE CONTRACTOR IS RESPONSIB LE FOR ALL WASTE MATERIAL SEGREGATION AND TOKEEP IN THE SAFE LOCATION ASSIGNED.WORK TO BE CARRIED OUT AFTER GETTING THE PO.CONTRACTOR SHALL HAVE THE PANELS FOR REPLACEMENT BASED ON THEREQUIREMENT.THE CONTRACTOR SHALL BE RESPONSIBLE FOR ANY DELAY IN CARRYING OUT TH EWORK AS WE HAVE TO TAKE THE TANK BACK IN SERVICE AS SOON AS POSSIBLE.PREVIOUS EXPERIENCE PO # TO BE PROVIDED FOR THE SAME TYPE OF J OB FROMDEWA OR ANY OTHER WELL-KNOWN COMPANY.WORK COMPLETION REPORT, FULL REPAIRING REPORTS WITH PHOTOS & WARRANTYFOR 12 MONTHS TO BE SUBMITTED TO DEWA.MATERIAL TEST CERTIFICATES, WELDER CERTIFICATE, RIGGING TOOLSCERTIFICATE, WPS TO BE PROVIDED TO DEWA.DEWA SCOPEFO RKLIFTSCAFFOLDING.AIR, WATER, AND ELECTRICITY.CONTRACTOR SCOPE OF SUPPLYSKILLED MANPOWER, TOOLS AND CONSUMABLESALL PERSONAL PROTECTI VE EQUIPMENT.RISK ANALYSIS AND METHOD OF STATEMENT OF THE JOB.DETAILED REPORT AFTER COMPLETION OF JOB.TESTED LIFTING EQUIPMENT WHICH EVER REQUIRED FOR JOB.ALL TOOLS AND TACKLES.ANY MATERIAL REQUIRE TO REPAIR THE TANK I.E. NUT, BOLT, GASKETS, NUTBOLT CAPS, TANK INTE RNAL SUPPORT SS RODS/ PVC PIPE ETC. 2 ITEM-00001 2- SUPPLY AND INSTALLATION OF THE PANELS BASED ON THE REQUIREMENT(MAXIMUM 25NOS SIZE 1MX1M) THE INVOICE OF THE PANELS TO BE CLEARED BASEDON THE QUANTITY FOUND DAMAGED/REPLACED. 25 EA 3 ITEM-00001 3- SUPPLY AND INSTALLATION OF THE PANELS BASED ON THE REQUIREMENT(MAXIMUM 10 NOS SIZE 2MX1M) THE INVOICE OF THE PANELS TO BE CLEARED BASED ON THE QUANTITY FOUND DAMAGED/REPLACED. 10 EA 1 LS STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2412400364)/$value

Refer document

FileName	File Description
Global Tender Document	Tender Notice