Tenders Are Invited For Construction Of A Multifunctional Pitch With A Roof Of A Permanent Structure At The Primary School No. 2 In Koło.

1. The Subject Of The Order Is: Construction Of A Multi-Purpose Sports Field With A Social Area Along With A Permanent Roof And Technical Infrastructure, As Well As Demolition Of Part Of The Building Of Primary School No. 2 In Koło, Hereinafter Referred To As (Sp2).2. Description Of The Subject Of The Order - The Scope And Quantity Of Works To Be Performed Should Be Considered In Relation To The Bill Of Quantities.3. The Following Scope Of Work Will Be Carried Out As Part Of The Investment: 1) In The Architectural And Construction Industry: A) Construction Of A Multi-Functional Sports Field With A Polyurethane Surface, With An Arched Roof With A Metal Structure. B) Construction Of Sanitary And Cloakroom Facilities Using Traditional Technology. C) Construction Partial Demolition Of The Former Coal Storage Warehouse In The Schools Currently Non-Functioning Coal-Fired Boiler Room And Works Related To The Reconstruction Of The Existing Boiler Room.D) Construction Of Reinforced Concrete Foundations And A Roofing Structure For The Sports Field.E) Construction Of A Connector Between The Hall And The Main Building Of The School.F) Construction Of A Fire Road Along With A New Exit From Leśna Street And Sidewalks Around The Newly Designed Hall And Sanitary And Cloakroom Facilities. G) Carrying Out Works Related To The Planned Reconstruction Inside The Primary School No. 2 Building In Order To Meet Fire Protection Requirements. And Replacement Of The Existing Thermal Insulation On The School Facade.2) In Terms Of The Installation Industry: A) Construction Of Water, Sewage And Central Heating Installations In The Social Part Of The Building Which Is A Sanitary And Cloakroom Facility With A Connection Of The Designed Installations With The Installations In The Existing Boiler Room In The Primary School Building2.B ) Construction Of A Central Heating Installation For The Designed Sports Hall With A Connection Of The Designed Installations With Installations In The Existing Boiler Room In The Primary School Building 2.C) Performance Of Works Consisting In The Reconstruction Of The Central Heating Installation In The Primary School No. 2 Boiler Room Resulting From The Planned Architectural And Structural Reconstruction Works Of This Room.D) Construction Of The Installation Internal Hydrant Of The Designed Facility With A New Water Supply Connection To Supply It, E) Construction Of An External Rainwater Drainage System To Drain Rainwater From The Facility. F) Construction Of A Sanitary Sewage Connection. 3) In The Electrical Industry: A) Location Of The Switchboard. B ) Installation Of Internal And External Lighting. C) Installation Of Plug Sockets. D) Installation Of Equalization And Lightning Protection Connections. E) Construction Of Low-Current And Telecommunications Installations.4) Facility Equipment: A) Laser Shooting Range For Five Positions, I.E. A Multimedia, Portable, Shooting Training System, Developed For The Needs Of The Civil Market, Which Is Not Subject To Licensing And Is Intended For Students. The System Includes, Among Others, The Following Elements: Projection Module, Keyboard With Mouse Or Trackpad, Tablet, Software, Training Weapon With Wireless Laser Modules (Class I Laser Devices) Dedicated To Types Of Replicas, A Rifle Replica With 2 Magazines Constitutes 1 Set - Deliver 5 Sets, A Pistol Replica With 2 Magazines Constitutes 1 Set - 5 Sets Must Be Delivered, A Wireless Charger For The Laser Module Enabling Connection Of Up To 10 Modules, Transport Packaging For The Above-Mentioned Equipment. The Shooting Range Also Includes A Portable Supporting Structure With A Shooting Screen Made Of White Material, With The Dimensions Of A White Field: 6.0 M X 3.2 M Wide, Serving As A Shooting Board On Which Target Objects Are Projected. B) Fold-Out Stage And Protective Carpet: Fold-Out Stage With Dimensions In Horizontal Projection Of At Least 7.0 M (Width) X 6.0 M (Depth) And A Minimum Height Of 60 Cm, Together With A Protective Covering Laid Over The Entire Surface Of The Sports Surface Of The Pitch And Its Protective Zones Around It. There Are Two Entrances To The Stage. The Carpet Serves To Protect The Sports Surface Against Damage. The Materials From Which The Stage And Protective Lining Are Made Meet The Fire Protection Requirements Regarding Flammability When Installed In This Type Of Facilities. C) Delivery And Installation Of Sports Equipment For The Facility, Including Construction Of Concrete Foundations Made Of B-25 Concrete And Embedding Installation Sleeves In Them Sports Equipment, I.E.: - Steel Structure For A Basketball Hoop With A Reach Of 160 Cm, Not Permanently Mounted (Structure, Backboard, Basket With Net = 1 Set) - 4 Sets In Total. One Basketball Set Consists Of The Following Elements: Tilting Basketball With Gas Actuators, With A Hookless System For Attaching The Net With A Rod; Chain Basketball Net; Steel Truss Basketball Backboard, Dimensions 105X180 Cm, On A Metal Frame, Hot-Dip Galvanized; Cover For The Lower Edge Of The Board 105X180 Cm; Mechanism For Adjusting The Height Of The Board 105 X 180 Cm In The Range Of 305 - 260 Cm; Two-Post Basketball Structure, Projection 1.6 M, For A Backboard 105 X 180 Cm, Hot-Dip Galvanized, Mounted In Sleeves, Two Sleeves Mounted In A Concrete Foundation; Two Epdm-Coated Metal Lids Mounted On Metal Sleeves In Case Of Dismantling The Steel Structure Under The Basket. - Aluminum Net Posts - Volleyball Nets With A Tensioning System And Net - 2 Pairs In Total. One Pair Of Volleyball Stands Consists Of The Following Elements: 2 Oval Aluminum Volleyball Posts, Multi-Functional With Smooth Height Adjustment; 2 Professional Volleyball Post Covers (5 Cm Thick Sponge Covered With Skaden On A Reinforcing Structure) Fastened With Velcro; 1 Net Hanger; 1 Device For Measuring The Height Of The Net; 2 Player Change Boards - 1 Set For 2 Teams; 1 Professional Volleyball Net, Weave Thickness 3 Mm, Kevlar Rope, Side Reinforcement, Mounting In 6 Points With Two One-Piece Antennas With A Cover. The Court Board Should Be Equipped With 8 Sleeves For Mounting Two Adjustable Pairs Of Aluminum Posts For The Net And Volleyball, And Eight Should Be Delivered Epdm-Coated Metal Covers Mounted On Metal Sleeves In The Case Of Dismantling Volleyball Posts. - Aluminum Posts And A Net With Tension For Playing Tennis (2 Posts With Sleeves + Net + Tension = 1 Set) - 1 Set In Total. One Tennis Set Consists Of The Following Elements: 2 Professional Oval Aluminum Tennis Posts With Internal Net Tension; Tennis Net, Rope Thickness 3.5 Mm, Green, Black; 2 Singles Supports; Tennis Net Tightening Tape With A Weight Or Ground Hook; Two Sleeves Mounted In The Concrete Foundation; Two Epdm-Coated Metal Lids Mounted On Metal Sleeves In Case Of Dismantling The Tennis Structure. - Professional Aluminum Handball Goals 3X2 M (2 Pcs. Goals With Net = 1 Pair) - 1 Pair In Total. One Handball Pair Consists Of The Following Elements : 2 Professional Aluminum Handball Goals (2X3 M) With Foldable Arches, Attached To The Surface On Plates, Removable; 2 Professional Handball Nets With A Ball Catcher, String Thickness 5 Mm, Green, White, Blue; Goal Adapters (Profile 80X80 Mm) - 1 Set For 1 Pair; Four Sleeves Mounted In A Concrete Foundation With Epdm-Coated Metal Covers; Four Epdm-Coated Metal Covers Mounted On Metal Sleeves In The Case Of Dismantling A Pair Of Handball Goals. - Aluminum Posts And A Tensioned Net For Badminton (2 Posts With Sleeves + Net + Tension = 1 Set) - 4 Sets In Total. One Tennis Set Consists Of The Following Elements: 2 Professional Oval Aluminum Tennis Posts With Internal Net Tension; Badminton Net, Rope Thickness 3.5 Mm, White; Two Sleeves Mounted In The Concrete Foundation; Two Epdm-Coated Metal Lids Mounted On Metal Sleeves In Case Of Dismantling A Pair Of Badminton Posts. - Ball Catcher, Dimensions 20 X 6 M, Made Of Polypropylene Mesh With Mesh 8X8 Cm Thick. 0.5 Cm Of Knotless Gable Wall Attached To The Beam Structure With A Fastening Rope - 2 Pcs. - Steel Pole Casing - Column Covers Of The Supporting Structure Roof Covering (5 Cm Thick Sponge Covered With Skaden On The Reinforcing Structure) Fastened With Velcro, Height 2.00 M – 38 Pcs. D) Delivery And Assembly Of Other Equipment Of The Facility: Lift For The Disabled – Stair Platform On Guides Mounted To The Wall, Including Its Commissioning And Obtaining All Necessary Permits For Its Use – 1 Pc. Internal Benches – Galvanized And Metal Supporting Structure Of The Bench Powder Coated. Each Bench With Four Seats Mounted To The Supporting Structure Of The Bench. Each Seat With A Backrest. Seat And Backrest Made Of Plastic. Benches Are Placed Inside The Covered Pitch And Can Be Moved Freely Throughout The Facility. The Materials From Which The Benches Are Made Meet Fire Protection Requirements Regarding Flammability When Placed In This Type Of Facilities. – 18 Pieces Of Benches. Outdoor Park Benches - Made Of Prefabricated Reinforced Concrete Elements, Wooden Seat Casing 2.0 M Long, Without Backrest, Including Foundation - 4 Pcs; Park Waste Bins - Metal, Galvanized, Powder Coated, Hinged For Emptying, Capacity 35 Liters. 35 Liter Waste Bins With Foundation - 2 Pcs.; External Regulation Board - Including Two Support Posts Made Of Powder-Coated Galvanized Steel Pipes And Foundation - 1 Pc. Detailed Description In Swz.