Bids Are Invited For Opening Of The Bidding Process To Record Prices For The Acquisition Of An 8,000 Liter Pipa Truck Tank, Built In An Elliptical Shape, As Described In The Terms Of Reference. Pd 1081/2024
Bids Are Invited For Opening Of The Bidding Process To Record Prices For The Acquisition Of An 8,000 Liter Pipa Truck Tank, Built In An Elliptical Shape, As Described In The Terms Of Reference. Pd 1081/2024
Tank For 8,000 Liter Water Truck, Built In An Elliptical Shape, Steel Wall Astm A 36 Double Seam Electrical Welding Using The Mig Process, With Welding Wire Of The Aws 5.18-79 Er 70 S And Din 8559 Standard.Totally In Mig Welding.Body Plates Made Of Lq 36 Steel, 3.00Mm Thick. Breather And Excess Water Overflow Trap, In The Shape Of A Tower, With 3 Inches In Diameter On The Cover Of The Tank Mouth. The Tank Has An Inspection Mouth And Water Inlet. Diameter Of 400Mm, In The Upper Part Of The Same Made Of Lq 36 Steel Plates, 3.75Mm Thick. For Greater Safety On The Route, Wave-Breaking Plates Are Positioned, Which Do Not Allow Excessive Movement Of Water On The Route, Made Of Plates In Steel Lq A 36, 3.75Mm Thick. Tank Level Sight Glass In 3/4 Transparent Crystal Hose. The Water Tank Will Be Completely Pickled To The Minimum Degree Of Preparation, Leaving A White Metal Appearance, Where It Will Then Be Painted With Two Coats Of High Corrosion Resistance Epoxy Primer. External Painting Application Of Background With Two Coats Of Synthetic Enamel Paint. Cradles: Metallic, Made Of 4.50Mm Thick Lq 36 Steel Sheet, Welded To The Tank, Fixed Using Special 5/8 Inch Clamps To The Truck Chassis. Cradle System Equipped With Cushion To Prevent The Tank From Twisting.Platform: Top Metal Made Of Steel Plates In Steel Lq A 36 Of 3.00Mm Thick Checkered (Floor) With Sailor Type Ladder For Access To The Tank Inspection Mouth , Manufactured In Industrial Tube 22.2 Mm In Diameter.Piping: The Pipes That Make Connections To The Tank Pump And Tank Pump Will Have Flexible Joints In 2-1/2 Inch High-Resistance Rubberized Water Hose.Complete Pump Piping In Connection With The Tank In Industrial Tube Of 3.5Mm Thickness And Diameter Of 2.1/2 Inches With Bends And Tee In Sch 40 Tube Of 4.00Mm Thickness And Brass Ball Valves Of 2-1/2 Inches.02 Angular Valves Nodular Hydrant 45 Degrees Manual 2-1/2 E...
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
