Tenders Are Invited For Construction Work – Building And Plant Automation

Construction Work – Building And Plant Automation. New Construction Of An Office Building With 5 Floors, With A Partial Basement In Accordance With The Requirements Of Dgnb Gold Certification. The Building Cubature As A Rectangular Volume With Two Differently Sized Inner Courtyards Has An Edge Length Of Approx. 86M X 41M. The Gross Floor Area Is Approx. 15,709M², The Partial Basement Is Approx. 1,645M². Building Height: 20.20 M Ok Attika Field Devices, Automation Systems, Switchgear, Automation Management, Cables, Lines And Installation Systems, Data Transmission Networks 1 Zlt Communication Focus With Engineering Station, Backup And Network Connection To The Zlt 2 Automation Focus Points For The Control And Regulation Of System Automation, 65 Room Automation Controllers As Well As 1 Meter Value Acquisition Focus With Approx. 320 Physical Data Points For System Automation And Approx. 9750 Data Points As Physical And Communicatively Connected Data Points For Room Automation. All Field Devices Must Be Delivered With Modbus/Rtu Or Integrated Into The Modbus/Rtu Via Remote I/O Modules. Room Automation Includes The Control Of Hvac Systems Such As Underfloor Heating, Heated/Cooled Ceilings, Circulating Air Cooling Units, Blinds, Lighting, Etc. For Automation Management, New Graphics Must Be Created On The Existing Mbe/Glt Siclimat X Based On The Existing Graphics And The New One Integrate Buildings Into The Overall Complex. Furthermore, The Electrical Installations And Network/Data Transmission Networks (Active And Passive) Must Be Installed. Start Of W+M Planning: June 2024 Start Of Installation Of Shafts: August 2024 Start Of Installation Of Routes/Rough Installation: October 2024 Start Of Fine Installation: February 2025 End Of Installation: September 2025 End Of Trial Operation/Technical. Acceptance: January 2026