Technical Specification For Pressure Fire Hoses With A Diameter Of 150 Mm. Pressure Fire Hoses With An Internal Waterproofing Coating Of An Internal Diameter Of 150 Mm With A Working Pressure Of 1.2 Mpa For The Complete Set Of Mobile Fire Equipment. A Frame (Cover) Made Of Synthetic Fibers With An Internal Waterproofing Layer (A Rubber Chamber Or A Chamber Made Of Polymer Materials). Pressure Fire Hoses Must Be Manufactured In Accordance With The Requirements Of St Rk 1714-2007 And Other Regulatory Documents Or Technical Documentation For Fire Hoses Of A Specific Type, Approved In The Established Order. Fire Hoses Must Meet The Safety Requirements Of Gost 12.2.037. Category Uhl According To Guest 15150 (St Rk 1714-2007 Fire-Fighting Equipment. Fire-Fighting Equipment. Fire-Pressure Hoses. Technical Requirements Of Fire-Fighting Safety. Test Methods) Intended For The Equipment Of Mobile Fire-Fighting Equipment And Designed For Operation At An Ambient Temperature Of Minus 50 C To Plus 45 C. Technical Characteristics: Inner Diameter (Mm) 150 Sleeve Length, Not Less (M) 20 1 Working Pressure, (Mpa) 1.2 Test Pressure, Not Less (Mpa) 1.5 Bursting Pressure, Not Less Than (Mpa) 2.4 The Weight Of A 1 Meter Long Sleeve Is Not More Than (Kg) 1.2 The Thickness Of The Inner Coating Layer Is Not Less Than (Mm) 0.35
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
