Educational Software Package Procurement Of Water Utility Educational System. Procurement Of A Water Utility Education System As Follows. The Complete Technical Description Is Contained In The Public Procurement Documentation (03_Muszaki_Leiras_Vizikozmu.Pdf) The System Should Consist Of Four Main Parts: 1. Four-Station Water Treatment Education System Connected Into One System 2. Sand Filter Station: Separation Of Solids 3. Membrane Filter Station: For Finer Filtration 4. Analog Water Level Regulation Station 1. Four-Station Water Treatment Education System Connected In One System The Basic Water Management System Includes The Following Components: - 1X Water Treatment Station - 1X Water Supply Station - 1X Waste Water Transfer Station - 1X Waste Water Treatment Station - 1X Water Supply Tank/Pump, Including Cables - 1X Additional Chlorine Package - 1X Additional Oxygen Meter Package - 1X Analog/Digital Simulation Box, With Cables - 4X Interface For Simulating Automation Processes, With Cables - 4X Water Management Control Software - 4X Dc Consumption Meter 2. Sand Filter Station: Separation Of Solids Includes Water Supply Tank/Pump, Control System , The Simulation Interface, The Connection Cables, The Accessory Kit And The Technical Support Documentation. Main Components Minimum 3 L Tank Including Overflow Rim, Capacitive Proximity Sensor, Float Switch, Magnetic-Inductive Flow Sensor, Centrifugal Pump, Minimum 4.75 L Sand Filter Unit, Proportional Medium Valve, Proportional Pressure Control Valve, Pneumatic Valve Connector 5/2-Way With Solenoid Valves, Non-Return Valve, Pressure Sensor, Electrical Connection Plate, Aluminum Profile Plate, 1X Package Of Quartz Sand And Quartz Gravel. Required Technical Data O Pneumatic Operating Pressure: Minimum 4 Bar Maximum 6 Bar (Minimum 50 L/Min) O Water Requirement Minimum 10 L O Power Supply O Minimum 6 Digital Inputs O Minimum 8 Digital Outputs O Minimum 4 Analog Inputs 3. Membrane Filter Station: For Finer Filtration It Includes The Control System, Simulation Interface, Connection Cables, Accessory Kit And Technical Support Documentation. Main Components Minimum 3 L Tank Including Overflow Flange, 3/2-Way Ball Valve, Membrane Filter Unit, Capacitive Proximity Sensor, Float Switch, Magnetic-Inductive Flow Sensor, Pneumatic Valve Connector With 3/2-Way Solenoid Valves, 5/2-Way Solenoid Valve, Diaphragm Pump, Proportional Media Valve, Proportional Pressure Control Valve, Pressure Sensor, Electrical Connection Plate, Aluminum Profile Plate. Required Technical Data O Pneumatic Operating Pressure: Minimum 4 Bar Maximum 6 Bar (Minimum 50 L/Min) O Water Requirement Minimum 10 L O Power Supply O Minimum 8 Digital Inputs O Minimum 8 Digital Outputs O Minimum 4 Analog Inputs O Minimum 2 Analog Outputs 4. Analog Water Level Control Station Process Control Basic Set The Device Should Be Suitable For Presenting And Teaching The Basic Principles Of Project Work And The Basics Of Closed-Loop Control - Manual Measurement, Open And Closed-Loop Control - With A Simple Level, Flow And Pressure Control E
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
