Bids Are Invited For Acquisition Of Ati (Senior Age Academy) Equipment, Intended For Setting Up Outdoor Gyms, In The Squares Of The City Of Conceição Do Coité-Ba, Bahia, In Accordance With The Conditions, Quantities And Requirements Established In This Notice And Its Annexes.

Individual Riding Simulator:-Manufactured With Carbon Steel Tubes Of At Least 2.½” × 2 Mm; 2” × 2Mm; 1.½” × 3 Mm; 1.½” × 1.50 Mm; 1” × 1.50 Mm. Flat Bar At Least 2.½” × ¼”; 3/16” × 1.¼”. Drawn Carbon Steel Tube 2” × 5.50 Mm Schedule 80 (60.30 Mm × 49.22 Mm). Carbon Steel Plates Of At Least 4.75 Mm For The Equipment Fixing Point And 2 Mm For The Printed Bench With Rounded Edges. Solid Pins Are Used, All Bearings (Double Bearings), Phosphate-Based Surface Treatment; Colored Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Round Flexible Rubber Stops (53 Mm × 30 Mm), Mig Welding, Parabolt Anchor Of Minimum ?” × 2.½”, Zinc Plated Screws, Acetal Bushing, Washers And Locknuts. Built-In Internal Plug In Injected Plastic Measuring At Least 2.½” And 2” With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. Destructive Reflective High Fixation Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data., Individual Ski - Manufactured With Carbon Steel Tubes Of At Least 2’ ½ X 2 Mm; 1’ ½ X 3 Mm; 1’ ½ X 1.50 Mm; 1’ X 2.00 Mm. Drawn Carbon Steel Tube 2’ X 5, 30×49, 22). Metal Of At Least 30 Mm X 50 Mm Flat Bar At Least 3/16’ X 1 ¼’. Use Solid Pins, Phosphate-Based Surface Treatment; Colored Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Round Flexible Rubber Stops (53Mm X 30Mm), Mig Welding, Parabout Anchor Of At Least 3/8 Fasteners; Built-In Internal Plug Made Of Injected Plastic Measuring At Least 2’ ½ With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. 3M Destructive Reflective Sticker With High Fixation With Identification Of Muscle Groups, Double Ski:-Material: 2 ½” Carbon Steel Tubes, In Addition To 30×50 Metal, The Plates That Make Up The Same Are Non-Slip, The Bearings To Be Used Are Armored And/Or Double, The Welds Are Made Through The Mig System, The Plugs Are Made Of Rounded Metal, The Footprint Locations Are All Rubberized, Avoiding Accidents, Rubber Stops, All Products Go Through Immersion, Suffering With This A Chemical Treatment Before Being Painted In The Electrostatic Powder System, The Anchors Used Are From The Parabout System., Double Leg Press: Double Leg Press – Material: 1 ½” To 3” Carbon Steel Tubes, All Products Undergo Immersion, Undergoing Treatment Chemical Before Being Painted In The Electrostatic Powder System, The Anchors Used Are From The Parabout System, Backrest:-Equipment Produced From High Strength Carbon Steel Tubes And Plates, In Dimensions Of 2 1/2?, 2?, 1 1/4 And 1? With A Minimum Thickness Of 2.00Mm; Tubular Holes, Upper And Lower Ends Shielded In Plate 14, Making It Insensitive To Water Penetration., Double Vertical Rotation:-The Equipment Is Manufactured In Round Tubes Of 2.1/2?, 1.1/2? And 1.3/4? With A Thickness Of 2 Mm And 4.75 Mm Sheets Of High-Resistance Carbon Steel, The Parts Are Welded Using The Mig Process. It Has A Corrosion-Resistant Electrostatic Paint, Plastic Tips For Protection And Rotated Balls