Tenders Are Invited For Unification Of The Front Fence Of The Historical Park In kno; Register No.: 1720/A; 1766/A- Stage I

Reconstruction Of The Fence Of The Historic Park In kno, Zaniemy l Commune - Spans From 55A To 60. Category Viii Object Address: kno, 63-020 Zaniemy l, Geodetic Registration Number Of The Plot: Plot No. 182, District: 0009 kno Unit. Register No. 302505_2 knofence Length - 40.25 Meters - In The Cost Estimatethe Plot Covered By The Investment Is Entered In The Register Of Monuments Under Number 1720/A, The Entry Was Made On April 23, 1975 And 1766/A Of May 31, 1977. The Area Is Not Within The Limits Of The Influence Of Exploitation Mining. Characteristic Parameters Of The Facility: Height Of The Fence Span (From The Road Level) 1.60 M Height Of The Posts (From The Road Level) 2.15 M Height. Post No. 1 And Gate Posts (From Road Level) 2.80 M1. Foundations: The Foundation Was Designed As An Angular Retaining Structure - Monolithic Reinforced Concrete In The Shape Of The Letter L: A Foundation Slab 30 Cm Thick And 80 Cm Wide And A Foundation Wall 25 Cm Thick And 125 Cm High. The Construction Materials Used Are: C30/37 Class Concrete And B500sp.2 Reinforcing Steel. Insulation: Insulate The Retaining Wall Against Moisture With Bituminous Mass, E.G. Dysperbit, By Painting It At Least Twice On Its Entire Surface. Before Backfilling The Trenches, Protect The Insulation With Dimple Foil. Before Starting The Brickwork, Lay Thermally Weldable Felt Felt With A Minimum Thickness Of 4 Mm On The Upper Surface Of The Retaining Wall.3. Posts: Made Of Solid Brick From The Demolition Of The Existing Fence Or, If It Is Missing, A New Brick Made To Measure. The New Brick Must Have A Compressive Strength Of At Least 10Mpa And A Maximum Water Absorption Of Not More Than 6%. Masonry Using Specialized Clinker Mortar. The Arrangement Of Bricks (Ties) In Individual Layers Is Consistent With The Art Of Bricklaying. Recreate The Thread On The Face Of Each Post In The Pattern Of The Existing Posts. The Caps (Covering The Posts) Should Be Made Of The So-Called Brick. Veneers. Determine The Final Color Of The New Brick And Grout With Wuoz In Pozna . Details Of The Solutions Are Shown In Figures 2 - 6.4. Bays: Made Of Solid Brick From The Demolition Of The Existing Fence Or, If It Is Missing, A New Brick Made To Measure. The New Brick Must Have A Compressive Strength Of At Least 10Mpa And A Maximum Water Absorption Of Not More Than 6%. Shape A (Drawing No. 7) Can Be Made To Order At A Brickyard Or Use Demolition Shapes. It Is Not Allowed To Make Shapes From Solid Brick By Cutting Off Its Corners! Masonry Using Specialized Clinker Mortar. Recreate The Brick Arrangement Exactly Like The Existing Spans. The Caps (Covering The Spans) Should Be Made Of The So-Called Brick. Veneers. Determine The Final Color Of The New Brick And Grout With Wuoz In Pozna . Details Of The Span Solution Are Shown In Figure 7.5. Gate: Made Of Steel Sections - Square Pipe, Flat Bar, Square Profile - According To The Dimensions In Drawing No. 8. Welded Elements. Attach The Gate Wings To Posts No. 56 And 57. Build Steel Hinges On The Faces Of The Above-Mentioned Posts On The Park Side, With A Spacing Adjusted To The Gate Wings. The Gate Opens Towards The Park. Install Steel Bolts In The Lower Corners Of The Gate Leaves (In The Gate Axis) To Enable Locking The Gate Leaves In The Open And Closed Position. Install Steel Pipes In The Ground Adapted To The Diameter Of The Locking Bolts. Paint The Gate With Black Oil Paint. The Final Shade And Degree Of Gloss Of The Paint Should Be Determined At The Execution Stage With Wuoz In Pozna . It Is Recommended That The Contractors Make A Local Visit To The Site Of Implementation Of The Subject Of The Order And Its Vicinity In Order To Familiarize Themselves With The Conditions Of Implementation Of The Subject Of The Order And To Evaluate The Documents And Information Provided Under This Proceedings By The Ordering Party.

Refer document

FileName	File Description
Global Tender Document	Tender Notice