Tenders Are Invited For Reconstruction And Change Of Use Of The Former Primary School Into A Nursery - Creation Of A Nursery In The Commune Of Osiek Jasielski In The Town Of Świerchów

1. The Subject Of The Order Is Reconstruction And Change Of Use Of A Former Primary School Into A Nursery - Creation Of A Nursery In The Commune Of Osiek Jasielski In The Town Of Świerchów Under The Maluch+ Program 2022-2029 And The Government Program For The Reconstruction Of Monuments (No. Edycja2rpoz/2023/7432/ Polishlad)2. The Scope Of The Order Includes Works Related To, Among Others: In Connection With The Planned Reconstruction And Change Of Use Of The Former Primary School Building Into A Nursery, The Following Works Are Planned: - Change Of Use Of The Existing Rooms Into Rooms Adapted To The New Function Of The Facility - A Nursery, - Reconstruction Of The Existing Building Space, - Insulation Of The Entire Building. As Part Of The Reconstruction, Work Is Planned To Include, Among Others: : - Demolition Works (Demolition Of External Stairs, Cobblestone Surfaces, Demolition Of Chimneys To The Necessary Extent, Demolition Of Sheet Metal Flashings, Carving Out Wooden Door Frames, Removal Of Internal And External Plasters, Demolition Of Internal Walls, Dismantling Of Soffits Made Of Reed Boards And Plastered, Dismantling Of Wooden Ceilings And Backfilling, Dismantling Floors And Subfloors, Removal Of Rubble And Excavated Material After Demolition) - Building Construction (Earthworks For Wall Foundations, Installation Of Reinforcement, Construction Of Internal And External Foundations, Insulation Works, Construction Of New Load-Bearing And Partition Walls, Construction Of A Reinforced Concrete Ceiling And Reinforced Concrete Rings, Strengthening Of Roof Truss Elements, Making Floor Screeds, - External Carpentry (Purchase And Installation Of New Windows, Window Sills And Window Sills, Purchase And Installation Of External Aluminum Doors) - Facade (Installation Of Scaffolding, Replenishing Wall Plasters, Priming Wall Surfaces, Finishing . Insulation Of External Walls With A Reinforcing Layer And Embedding The Mesh, Silicone Plaster On The Facade, Installation Of Downpipes, New Sheet Metal Flashings On Chimneys, Finishing Works On Soffits) - Internal Finishing Works (Plastering Of Internal Walls And Ceilings, Cladding Walls With Tiles) , Painting Works, Damp-Proof And Thermal Insulation Of Floors With Screeding. Construction Of Plastic Floors And Tiles, Insulation Of Ceilings With Cement Screeds, Insulation Of Gable And Knee Walls, Installation Of Internal Doors, Balustrades On Internal Stairs And Roller Blinds On Each Window Leaf) - Development Of The Rhine, I.E. Among Others Entrance To The Building With A Driveway (Construction Of A Substructure For Stairs With A Landing And A Ramp For The Disabled, Construction Of Stairs, Tiles And A Driveway Made Of Palisades And Paving Stones, Construction Of Railings At The Stairs And Driveway). Other Works Included In The Scope Of Internal Works Include: Balustrades On The Stairs To The Attic And Roller Blinds Mounted On Each Window Sash. In Addition To General Construction Works, Industry-Related Works Will Be Performed In The Facility, Such As; Electrical Works, Water And Sewage Installation Works, Central Heating, Gas Installation And Mechanical Ventilation And Air Conditioning.3. A Detailed Description Of The Subject Of The Order Is Included In Annex No. 4A, 4B, 4C To The Swz - Technical Documentation, Bill Of Quantities, Sstwior, Respectively, To The Specification Of The Terms Of The Order.4. Note - The Individual Scope Of Works Should Be Agreed With The Ordering Party. 6. If The Description Of The Subject Of The Order Would Indicate Trademarks, Patents Or Origin Of The Ordering Party In Relation To Certain Materials And Devices, In Accordance With Art. 99 Section 5 Of The Act Allows The Submission Of Equivalent Products. All Products From Specific Manufacturers Specify The Minimum Quality Parameters And Functional Features That The Goods Must Meet In Order To Meet The Requirements Set By The Ordering Party And Constitute Only A Quality Standard Of The Subject Of The Order. By The Provision Regarding The Minimum Requirements For Quality Parameters, The Ordering Party Understands The Requirements Of The Goods Contained In Publicly Available Sources, Catalogs And Manufacturers Websites. The Use Of Exemplary Manufacturers Names Is Only Intended To Clarify The Level Of Expectations Of The Ordering Party In Relation To A Specific Solution. Therefore, The Use Of Manufacturers/Products Names Is For Example Purposes Only. When Describing The Subject Of The Order, The Ordering Party, Indicating The Name Of A Specific Manufacturer (Supplier) Or A Specific Product, Also Allows Equivalent Products With Quality Parameters And Functional Features, At Least At The Level Of The Parameters Of The Indicated Product, Thus Accepting Every Product With The Indicated Parameters Or Better. In Such A Situation, The Ordering Party Requires The Submission Of Appropriate Documents (Along With The Offer) Confirming The Credibility Of These Materials Or Devices. They Will Be Subject To Assessment By The Ordering Party, Which Will Be The Basis For The Ordering Partys Decision To Accept Equivalents. The Ordering Party Reserves The Right To Ask The Author Of The Design Documentation For An Opinion On The Offered Materials Or Devices. If The Contractor Does Not Submit Documents Regarding The Use Of Other Materials And Devices, It Is Understood That The Materials And Devices Proposed In The Description Of The Subject Of The Order Were Included In The Calculation Of The Offer Price.7. The Technical And Qualitative Features Of The Subject Of The Order Should Comply With Polish Standards Transposing European Standards Or Standards Of Other Member States Of The European Economic Area.