Bids Are Invited For Furniture Acquisition/Adaf

(Id-104176) Bench, Type: ``L`` Side; Description: ``L`` Side Side Measuring 577+105 700Mm; Lower Module Measuring 1000 X 530 X 870 Mm, With Two Doors And A Shelf; Lower Module Measuring 1000 X 530 X 870 Mm With Two Doors And Two Drawers; Hollow Module Measuring 1000 X 530 X 870 Mm, Provided With A Bottom Panel; Set Of 110/220 V Sockets, Mounted In A Plastic Box Fixed On The Top., (Id-106743) Cabinet, Type: Tall. Top In Low Pressure Melamine Laminate (Bp) 18Mm; Back, Sides, Doors, Shelf, Base In 18Mm Particleboard, 6 Internal Shelves In Low Pressure Melamine Laminate (Bp) 18Mm; Polypropylene Base With 4 Height Levelers; Metal Parts With Hot Degreasing Treatment And Anti-Rust Treatment; Dimensions (±25Mm): Width 800 Mm, Height 2140 Mm, Depth 490 Mm; Key In The Door With Double Switching, Color: Corresponding To The Requesting Organization., (Id-116808) Rectangular Table, Type: Linear; No Drawers; Top: Linear Surface; Dimensions (Lxw): 1400X600mm; Material: Mdp Wood (Medium Density Particleboard), 25Mm Thick, Covered On Both Sides With Low-Pressure Melamine Laminate, Textured; Side, Front And Back Edges Finished In Pvc Tape In The Same Color As The Laminate; Comes With 02 Injected Polystyrene Cable Grommets, 01 Horizontal Wiring Channel Made Of Steel Sheet, Allowing The Passage Of Wiring In 02 Independent Ducts For Electrical And Logic/Telephony; Panel: Structural; Material: Mdp Wood (Medium Density Particleboard), 18Mm Thick, Covered With Melamine Laminate, With Pvc Tape Finishing On All Ends; Suspended From The Floor And Coupled To The Structural Columns; Structure: Composed Of 02 Metal Columns With Stabilizing Feet; Dimensions (A): 740Mm; It Has An Internal Part In The Shape Of A “U“, Allowing The Separation Of Electrical, Logical And Telephone Wires And A Removable Cover For Passing The Cables; Material: Steel Or Extruded Aluminum With Degreasing Treatment; Feet With Leveling Shoes Made Of High-Impact Injected Polystyrene; All Metal Parts In The Set Must Be Finished In Anti-Corrosive Paint In Epoxy Resin Or Similar., (Id-136178) Service Bay, Type: Straight; Composed Of 2 Straight-Shaped Tops, 1 Lower, Which Will Be The Attendants Table, And 1 Upper, For Use By Those Who Will Receive The Service; Lower Top In 25Mm Mdf Divided Into 02 Parts, Each Part With Dimensions 1200X600mmx 750Mm(Lxwx), With Swinging Cover With Cutout On The Front To Allow The Passage Of Cables; 01 Horizontal Rail With Internal Division For Passing Wiring Under The Top; Top Top In 45Mm Mdf Divided Into 2 Equal Parts, 1200X600mmx750mm (Lxwxh); 04 Mdf Structural Panels, With Curved Shape, Measuring 750X1080mm (Box), Installed From The Floor And Fixed To The Structural Columns; Total Counter Size: 2400Mm X 750Mm X 60Mm (Txaxl). The Entire Counter Is Made Of Mdf (Medium-Density Fiberboard), Woody Color Wengue Valenci With A Thickness Of 45Mm, Must Have Internal Shelves With Recesses For Computer Use In Each Room With Polypropylene Wire Guide, 02 On The Internal Parts And 02 On The Sides , The Counter Contains 02 Side Divisions And 01 Front For Simultaneous Use By Up To 02 Attendants, Front Division In Tempered Glass, Glass Size 2400 Mm In Size X 500 Mm In Height, With Holes To Pass Through The