Tenders Are Invited For Construction Work For School Buildings – General Contractor Services (Planning From Lph 5 Hoai And Construction) For The New Building Of The Didier Comprehensive School (Ges Mitte Süd)

Construction Work For School Buildings – General Contractor Services (Planning From Lph 5 Hoai And Construction) For The New Building Of The Didier Comprehensive School (Ges Mitte Süd). The Client Intends To Award General Contractor Services For The New Construction Of The Didier Comprehensive School In Duisburg. The Contract To Be Awarded Concerns The Implementation Planning As Well As The Turnkey And Operational Construction Of A New School Building Plus A 5-Bay Sports Hall With Additional Uses As So-Called. Quarter House And Outdoor Facilities. The Gross Floor Area Of ​​The School Building Is Approximately 19,000 M2 And That Of The Sports Hall Is Approximately 7,000 M2. The Schoolyard Roofing Makes Up An Additional Approximately 2,600 M2. The Client Had The Planning Of Lph 1-4 According To Hoai, The Functional Service Description And Key Details Drawn Up By A General Planner. On This Basis, The Contractor Should Create The Necessary Detailed Plans And Build The Building. Special Features Of The Order Include: - All Essential Demolition Work On The Property Has Been Carried Out. - The New Buildings Do Not Have A Basement - The School Building Is Planned As A Reinforced Concrete Skeleton Construction Made Of Supports And Flat Slabs With A Few Load-Bearing And Stiffening Core Walls - The Foundation Of The School Building Is Planned On An Elastically Bedded Floor Slab - The Schoolyard Roofing Consists Of A Trough-Like Ceiling And Supports Made Of Reinforced Concrete . The Canopy Is Connected To The Building Using Insulated Baskets. The Foundation Below The Supports Is Planned Using Individual Foundations. - The Foundation Of The Sports Hall / Neighborhood House In The Support Area Is Planned Using Individual Foundations In Combination With Strip Foundations And An Elastically Bedded Floor Slab - The Hall Support Structure Of The Sports Hall / Neighborhood House Consists Of A Saddle Roof Girder Made Of Wooden Upper And Lower Chords, As Well As Vertical And Diagonal Bars In Both Parts Of The Hall. The Roof Support Is Made Of An Acoustically Effective Trapezoidal Sheet Metal. The Trusses Of The 3-Field Hall Are Supported On Reinforced Concrete Supports, Which Are Connected To Each Other At The Truss Heads Using The Beams In A Tension And Pressure-Resistant Manner. The Trusses Of The 2-Field Hall Are Supported On The Reinforced Concrete Inner Wall And The Facade Supports. Due To The Small Column Width, A Pure Glued Laminated Timber Beam Is Used In The Technical Room. The Gable Walls Are Designed As Reinforced Concrete Walls, Which Are Broken Up Into Supports On The Ground Floor And Second Floor. The Ceiling Above The Ground Floor Is Made Of Reinforced Concrete. This Transfers Its Loads To Reinforced Concrete And Masonry Walls And To The Reinforced Concrete Supports In The Facades. In The Auditorium Area, Prestressed Concrete Beams Are Used Below The Reinforced Concrete Ceiling For Support-Free Training. - A Pv System Is Planned On The Roof Of The Sports Hall / Neighborhood House. - A Representative Roof Foundation Is Planned On The Schoolyard Roof. - Both Buildings Are Planned In Accordance With The Building Physics Quality According To Geg And The Increased Requirements According To Beg 40 - School Building And Sports Hall / Neighborhood House Will Receive Full-Surface, Mechanical Ventilation