Tenders Are Invited For Cnc Lathe – 24 22 2Cl 001 Tandem Underfloor Wheelset Lathe For The Dortmund-Hafen Plant, Db Fernverkehr Ag

Cnc Lathe – 24 22 2Cl 001 Tandem Underfloor Wheelset Lathe For The Dortmund-Hafen Plant, Db Fernverkehr Ag. A Cnc-Controlled Tandem Underfloor Wheelset Lathe Is To Be Purchased For Db Fernverkehr Ag At The Dortmund-Hafen Location (New Procurement/New Construction). This Publication Relates To The Production, Delivery, Assembly, Commissioning, Training, Trial Operation And Final Acceptance Of The Machine Including All Necessary Peripherals For The Dortmund-Hafen Plant. The Machine Is Mainly Used To Measure And Process Wheel Sets From Db Fernverkehr Ag With A Standard Track Width Of 1,435 Mm (Mainly Ice Series And Ic Series). The Tandem Underfloor Wheel Set Lathe Must Be Suitable For The Following Tasks/Functions: ► Automatic Measurement Of The Wheel Sets In At Least The Usual Wheel Set Dimensions A1, A2, D, ∆D, E, H, Qr, G And H ► Measurement/Processing Of The Wheel Sets In The Installed State Or As An Individual Wheel Set With Bearings/Bearing Housings O Wheel Sets Can Be Internally Or Externally Mounted And Sometimes Mechanically Coupled To One Another ► Automatic Reprofiling Of The Wheel Rims/Wheel Tread On Monoblock And Tire Wheel Discs With Profiles According To Din En 13715 Or Ril 984.0400 In Various Diameters And Widths As Well As: O Processing Of Wheel And Shaft Brake Discs (Tarpaulins) O Processing Of The Outer Wheel Rim Face And Regrooving Of The Identification Groove ► Proof Of The Compliant Condition Of The Wheel Sets After Processing With Regard To The Parameters D1.2, ∆D1.2, E1.2, H1 ,2, Qr1,2, H1,2, G1,2, A1 And A2 With A Measuring System In Accordance With Din 27201-9 ► Logging Of All Measured And Calculated Data In An Electronic Database (Machine-Internal Or Db-Hosted) Plus The Automated Transmission Option The Internal Erp System (Sap Isi) ► Possibility Of Remote Maintenance Access Via “Secure Remote Maintenance” ► Output Of Defined Machine Information Via Opc Ua Interface ► Registration/Logout Of Operators Via Db Group Id And Assignment Of Corresponding Authorizations The Underfloor Wheelset Lathe Is With An Automatic Chip Disposal Device With Chip Crusher, A Smoke And Dust Extraction System, A Hydraulic System And Other Functionally Necessary Peripherals In Accordance With Ce Conformity Using The Latest State-Of-The-Art Technology. The Primary Measuring Circle Diameter Range To Be Processed Is Between 580 Mm And 1,250 Mm. The Wheelset Shaft Length Including The Bearings/Bearing Housings Is A Maximum Of 2,600 Mm, The Axle Load Acting On The Machine Is A Maximum Of 250 Kn (Plus Any Hold-Down Forces That May Need To Be Applied).