Bids Are Invited For Acquisition Of Materials For Connecting An Artesian Well At Line 12 (Elemar Stacke Well)

Motor Pump, . 4-Inch Submersible Motor Pump For Artesian Well With 1 1/4 Booster Nozzle With A Flow Rate Of At Least 2.4 Cubic Meters Per Hour At A Total Monometric Height Of 310 M.C.A, With A Motor Of Up To 6 Hp, Single-Phase 220 Volts, Water-Cooled, Manufactured In Brazil . The Motor And Pump Must Be From The Same Brand And Manufacturer. With A 50X40x20 Metal Control Panel Assembled With At Least The Following Components Necessary For Operation And Protection, Sized According To The Pump Model: Ammeter, 3-Position Switch (Manual, Shut-Off And Float), Thermomagnetic Circuit Breaker, Contactors, Capacitors, Start-Up Timer, Voltage Level Relay (Maximum And Minimum), Overload Relay, Lower Well Level Relay, Level Electrodes, With At Least 01 Year Warranty, Galvanized Pipe Bar Of 6 Meters Each (1 ¼´´) Wall 3.00 Mm With Thread According To Nbr 5580.., Galvanized Sleeve Of 1 ¼´´.., Galvanized Union Of 1 ¼´´.., Nipple Unit Of 1 ¼´´.., Well Mouth Flange Of 6 ´´X1 ¼.., Check Valve 1 ¼´´.., 90º Bend 1 ¼ Galvanized External Thread.., Pp Cable 3X25mm Flexible Insulation 0, 6/1Kv According To Nbr 7288.., Pp Cable 2X1, 5Mm Flexible 0 Isolation, 12V Radio Transmitter Kit With Battery, Solar Board And 220V Receiver For Water Tank Level Control At A Distance Of 2000 Meters Without Sight..