Tenders Are Invited For Construction Of Municipal Roads, Parking Lots And Renovation Of Municipal Roads In The Bolesławiec Commune

1. The Subject Of The Order Is The Implementation Of The Following Tasks: 1.1. Investment Tasks:1. Construction Of Road No. 96/1 In The Village Of Brzeźnik, 2. Construction Of Road No. 316/3 In The Village Of Brzeźnik,3. Construction Of Road No. 834, 832/4 In The Village Of Kraśnik Dolny, 4. Construction Of A Parking Lot On Plot No. 427/1 And 430 In The Village Of Trzebień.1.2. Renovation Of Roads Located In The Bolesławiec Commune, Consisting Of: 1) Partial Renovation Of Asphalt Road Surfaces In The Amount Of Approx. 1,100 M2 Using The Following Technology: Mechanical Cutting Out Of The Damaged Surface, Cleaning Of The Damaged Surface, Incorporation Of A 6 Cm Thick Asphalt Mass (Ac 11S Wearing Course ), Sealing The Edges Of The Patch With Asphalt Emulsion And Sprinkling The Edges With Grit. It Is Assumed That This Technology Applies To All Renovations With Asphalt Mass With An Area Of ​​One Patch Up To 10 M2.2) Incorporating Crushed Stone Into Dirt Roads In The Amount Of Approx. 500 M3 Using The Following Technology: Channeling The Existing Surface With A Depth Of ± 15 Cm, - Filling The Channel With Crushed Stone Of Fraction 0÷31.5, - Leveling And Compacting The Crushed Stone (Layer After Compaction, 15 Cm Thick), 3) Making An Asphalt Overlay In The Amount Of Approx. 1,700 M2 Using The Following Technology: - Leveling And Cleaning The Road Section With The Existing Crushed Aggregate Surface With Mechanically Stabilized D31.5 Crushed Aggregate On A Thickness Of 10 Cm Or, In The Case Of An Existing Road With An Asphalt Surface, Milling This Surface, Laying A 6 Cm Thick Layer Of Mineral-Bituminous Mixture (Ac 11S) And Sealing The Edges Of The Bituminous Mixture With Asphalt Emulsion; 4) Repairing The Road Surface In The Amount Of Approx. 2000 M2 Using The Following Technology: - A Layer Of Mechanically Stabilized Crushed Aggregate 0/31.5, An Average Thickness Of 10 Cm (From 5 Cm To 15 Cm) To Level The Existing Surface, Or - Double Surface Consolidation Of The Surface With Grits Of Fractions 2/5 And 5/8 In An Amount Of Aggregate Of 18 Dm3/M2 And Asphalt Cationic Emulsion. 5) Placing A Concrete Curb 30X150cm (Alternatively 22X150cm) On A B20 Thick Concrete Footing. 15Cm – Up To 20 Meters.