Task 1 - Water Supply Network With Hydrant Branches In Kolonia Natalin, Commune. Jastk wthe Scope Of The Order Includes The Construction Of: - Water Supply Network Made Of Pipes With A Diameter Of 160 X 9.5 Mm And A Total Length Of L = 407.5 M; - Water Supply Network Made Of Pipes With A Diameter Of 125 X 7.4 Mm And A Total Length Of L = 1173.0 M; - Approaches For Dn 80 Hydrants Should Be Made Made Of Pipes With A Diameter Of 90 X 5.4 Mm With A Total Length Of L = 40.0 M And Of Ductile Iron With A Total Length Of L = 4.0 M; - Gate Valve On The Approach To The Hydrants And For Connection To The Existing Water Supply Networks; - 10 Fire Hydrants. With Dn 80 Mm Above Ground With Dn80 Shut-Off Valves. Pe 100-Rc, Sdr17 Pipes Should Be Used For The Construction Of The Water Supply Network. Task 2 - Water Supply Network In Jastk w, Jastk w Commune. The Scope Of The Order Includes The Construction Of: - Water Supply Network With A Diameter Of Dn 125X7.4 Mm With Length 657.2 M; - Water Supply Network With A Diameter Of Dn 90X5.4 Mm, Length 35 M; - Use A Pe100rc Sdr17 Casing Pipe With A Diameter Dn 200X11.9 Mm; - Gate Valve In The Water Supply Network, Make Flanged Ductile Iron Flanges With Diameters: Dn 100 And Dn 80 ;- Above-Ground Hydrants (5 Pcs.), Red, Flanged, Diameter Dn80, Pressure Pn16. Pe 100Rc Sdr 17 Pipes Should Be Used To Build The Water Supply Network. Task 3 - Network And Branches Of The Sanitary Sewage System To The Border Of The Plots In Barak And D b wka. Scope The Order Includes The Construction Of A Sanitary Sewage Network On The Section From Sw 74 To S5 (Connection To The Existing S5 Well) Along With Side Networks And The Section From Sw2 To S77. The Sanitary Sewage Network And Branches Should Be Made Of Unsoftened (Solid) Pvc-U Sewage Pipes Of Sn 8 Class (In The Case Of An Open Trench) Connected With Rubber Gaskets Or Of Pe Hd 100-Rc Sdr17 Pipes (Trenchless Method) Butt-Welded. At The Bends Of The Sanitary Sewage Route And As Inspection And Connection Wells, Make Wells From Concrete Rings Dn1200mm And Plastic Wells Dn425mm. Task 4 - Delivery And Installation Of An Intelligent Water Management System. Construction Of A System For Supervising The Production And Quality Of The Water Supply Network In The Commune, Including The Purchase And Installation (2,047 Pieces) Of Integrated Measuring Devices For Balancing Water Supply And Sewage Disposal In Designated Zones And For Listening For Potential Leakage Points On Distribution Pipes And Connections In Residential Areas, Purchase Of A Program For Radio Communication With Devices And A Program For Visualizing Potential Leakage Locations On A Map Water. The Purchase Of 2,047 Pieces Of Integrated Measuring Devices Concerns The Delivery And Installation Of An Intelligent Water Management System Based On Water Meters With Acoustic Leak Detection Function, Ultrasonic Water Meters, Radio Reading Systems, Leak Monitoring And Zone Balancing Systems. Note: To Declare Readiness For Final Acceptance, You Must Provide, Among Others: - The Necessary Protocols, - As-Built Geodetic Inventory, I.E. A Map With An Official Clause Confirming Acceptance Into The State Geodetic And Cartographic Resource Or A Declaration By The Contractor Of Geodetic Works On Obtaining A Positive Verification Result, And Information On The Compliance Of The Location Of The Building With The Land Development Project Or Deviations From This Project, - Permission To Use The Subject Of The Contract Issued By Pinb.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
