Tenders Are Invited For Carrying Out Partial And Current Renovations Of Municipal Streets And Roads In The Janów Lubelski Commune In 2024

1. The Scope Of The Order Includes: 1) Partial Renovation Of Bitumen Surfaces Along With Sealing The Edges With Asphalt Emulsion (Renovation With Manual Cutting Of The Edges Of Potholes, 4 Cm Deep (100 Kg/M2), In The Amount Of 400 M2; 2) Partial Renovation Of Concrete Pavement Paving Stones (Cubes Of Various Thickness And Dimensions On A Sand Bed, Joints Filled With Sand), Investors Cubes, 100 M2; 3) Height Adjustment Of Sanitary Sewage Wells, Together With Filling Around Manholes With Mineral-Bituminous Mass Or Concrete Cubes On A Cement-Sand Ballast, In Quantity 10 Pcs;4) Cold Milling Of The Asphalt Surface, In The Amount Of 200 M25) Sealing Of The Milled Asphalt Surface With A Mixture Of Asphalt With The Addition Of Appropriate Thermoplastic Polymers, In The Amount Of 100 M2;6) Surface Treatment Of Road Surfaces With Asphalt Emulsion, Stone Grit Of Fractions 5-8, In The Quantity 8.0 Dm3m2, In The Amount Of 150 M2. Partial Renovation Of Asphalt Surfaces (Items 1) To 6), In The Amount Of 5,000 M27) Execution: Surface Consolidation Of Road Surfaces, Asphalt Emulsion, Stone Grit Of Fractions 8-12, In The Amount Of 10.0 Dm3m2, In The Amount Of 5,000 M2 Details Orders; – Cutting The Surface Using A Saw For Cutting Asphalt Or Milling With A Milling Machine To A Depth Of 4 Cm, Removal Of Rubble And Management By The Contractor; – Laying And Compacting An Asphalt Mixture Thick Wed. 4 Cm, Sprinkling The Bottom Of The Cavity And Smearing The Walls With Asphalt Emulsion, Closing The Surface Joint And Sealing The Edges Using Asphalt Emulsion; – Regulation Of Sewage Wells On A Ring With Milling Of The Surface Around The Well, Reconstruction Of The Surface Of The Cavity Around The Manholes With Mineral And Bituminous Mass Along With Compaction Of The Width Around 0.5 M Well, Alternatively Filling The Defect With Concrete Cubes On A Cement-Sand Ballast; – Milling Of Asphalt Surfaces, Damage To Transverse Or Longitudinal Surfaces Using A Milling Machine With A Depth Of 2 Cm; – Sealing The Milled Asphalt Surface Using Asphalt Grout With The Addition Of Appropriate Thermoplastic Polymers. The Asphalt Grout Should Have Technical Approval. Before Applying The Asphalt Grout, The Joint Should Be Properly Cleaned And Protected With A Primer, Which Will Increase The Adhesion Of The Asphalt Grout To The Joint Walls. In Order To Quickly Put The Seal Into Operation, Sprinkle The Top Of The Seal With Dry, Fine-Grained Material Dedicated To This Type Of Work. - Surface Consolidation Of The Road Surface By Double Sprinkling2. The Method Of Carrying Out The Order Is Described In Detail In The Technical Specification For The Execution And Acceptance Of Construction Works, Which Constitutes Annex No. 2 To The Swz.