Tenders Are Invited For Construction Of A Playground In The Jan Iii Sobieski Park In Nakło Nad Notecią - Preparatory Works And Construction Of A Playground In The Jan Iii Sobieski Park In Nakło Nad Notecią.

The Subject Of The Order Includes: Construction Of A Playground In The Park. Jan Iii Sobieski In Nakło Nad Notecią - Preparatory Works And Construction Of A Playground In The Park. Jana Iii Sobieskiego In Nakło Nad Notecią. Description Of The Subject Of The Order For Individual Scope. Scope I Construction Of A Playground In The Park. Jana Iii Sobieskiego In Nakło Nad Notecią - Preparatory Works The Subject Of The Order Includes Construction Works For Scope I Of The Construction Of A New Playground Located On Plot No. 2109/10 In The Park. Jan Sobieski In Nakło Nad Notecią. A Detailed And Complete Description Of The Subject Of The Order Was Specified In The Technical Documentation, Which Was Prepared For The Full Scope, While The Scope Of Execution Of Scope I Covered By This Order Includes: 1) Preparatory Works (Mechanical Grubbing Up Of Trees And Shrubs), 2) Earthworks, Including: A ) Construction Of A Sand And Gravel Surface - Approx. 68 M2, B) Construction Of A Grass Surface - Approx. 317 M2, C) Construction Of A Surface Of Concrete Slabs - Approx. 24 M2, D) Construction Of New Planting Of Trees And Shrubs, 3) Installation Of A New Fence For The Square Playground Equipment, 4) In Terms Of Playground Equipment: A) Relocation And Installation Of 3 Pieces Of Playground Equipment (Play Set, Carousel, Spring Rocker) That The Ordering Party Has From The Closed Playground, Including Technical Inspection, Replacement Of Damaged Elements And Repainting Of Damaged Elements . The Devices Are Currently Dismantled And Stored In A Place Secured By The Ordering Party In The City Of Nakło Nad Notecią, B) Construction Of A Path With Animal Traces - In Accordance With The Details Described In The Technical Documentation, C) Installation Of Small Architecture - 2 Benches With A Backrest, 2 Pcs. Benches Without Backrest, 2 Pcs. Waste Bins, 1 Pc. Picnic Set. General Requirements Of The Ordering Party Regarding The Specifications Of Devices/Equipment: Construction: Galvanized And Powder-Coated Steel Elements/Stainless Steel, Platforms And Boards Made Of Anti-Slip Plywood, Boards Made Of Hdpe/Hpl Materials, Slide - Slide - Stainless Steel, Screw Heads, Nuts Covered With Plastic Caps, Cap Nuts, - Anchoring: Device Permanently Placed In The Ground, Anchored In Concrete Class Min. C16/20. The Detailed Scope Of Construction Works Is Included In The Technical Documentation And Bill Of Quantities Attached To The Proceedings. Scope Ii Construction Of A Playground In The Park. Jan Iii Sobieski In Nakło Nad Notecią. The Subject Of The Order Includes Construction Works For Scope Ii Of The Construction Of A New Playground Located On Plot No. 2109/10 In The Park. Jan Sobieski In Nakło Nad Notecią. A Detailed And Complete Description Of The Subject Of The Order Was Specified In The Technical Documentation, Which Was Prepared For The Full Scope, While The Scope Of Execution Of Scope Ii Covered By This Order Includes: 1) Delivery And Installation Of Playground Equipment - The Following Playground Equipment: A) Obstacle Course/Bridge/ Balance Beam: Age Range +5 Years, Dimensions 342 X 164Cm, Height 120 Cm, Fall Height - 60 Cm, Safety Zone - 325 X 625Cm.B) House Play Set: Fall Height < 62 Cm, For Permanent Installation In The Ground, Device Dimensions 175 X 175 Cm, - Age Range - 1-5 Years, - Safety Zone - 450 X 450 Cm, 20 M2, - Made Of Hpl Boards, Impregnated Pine Wood Posts, Stainless Steel Metal Elements, - Compliance With The Pn-En- 1176-1:2017.C) Swing For An Adult And A Child (Mother + Child Set): Max. Fall Height – 1.50 Cm, Dimensions Devices -1.75 X 2.05 X 2.38 M, - Safe Zone Area - 7.35 X 2.60 M2, - Electrolytically Galvanized Steel Posts, Chains In The Cover, - Two Types Of Seats - 1 Seat For Children Younger Children And 1 Mother + Child Seat - A Swing Intended For A Caregiver And A Small Child - Joint Play, The Seat Promotes Interaction And Communication Between Generations, Enabling Adult Or Older Children To Swing Face To Face With The Toddler (Special Seat).D) Rocker - Balance Beam/Balance Beam: Age Range - 3-5 Years, Dimensions - 69 X 23 Cm, Height 115 Cm, Fall Height - 58 Cm, Safety Zone - 324 X 369 Cm, Drop Made Of Polyethylene. E) Cymbals: - Age Range - 3-12 Years - Dimensions. Length 175 X 65 Cm, Height 105 Cm, Sticks/Instruments Permanently Attached To The Device, Playing Device.F) Sandbox: Made Of Natural, Smoothly Polished Oak Wood, Seats Included, For Permanent Installation , Dimensions 100 Cm Side, Set Of 10 Panels For Assembly.G) Sand Play Table: For Installation In A Sandbox, Dimensions. Length 87 Cm, Height 48 Cm, Made Of Hpl Board, Post Made Of Hot-Dip Galvanized Steel.H) Sandbox For A Child In A Wheelchair: For Installation Next To The Sandbox On A Sandy Surface, Made Of Hpl Board, Post Made Of Hot-Dip Galvanized Steel,  Dimensions 140 X 140 Cm, Height 70 Cm.I) Play Set - Scorpion Type Carousel:  Age Range - 5-12 Years,  Dimensions - Length 274 X 254 Cm, Height 300 Cm,  Height .Fall < 60Cm, Safe Zone - 480 X 480 Cm, 19 M2.J) Play Set - Single-Person Carousel Type Pirouette/Rocker/Pendulum: Age Range - 5-12 Years, Dimensions - Length 274 X 254 Cm, Height 300 Cm, Fall Height - <60 Cm, Safe Zone - 480 X 480 Cm, 19 M2. Requirements Of The Ordering Party Regarding The Specifications Of The Devices/Equipment And The Method Of Installation: Construction: Galvanized And Powder-Coated Steel Elements/Stainless Steel , Platforms And Plates Made Of Anti-Slip Plywood, Hdpe/Hpl Boards, Slide - Slide - Stainless Steel, Screw Heads, Nuts Covered With Plastic Caps, Cap Nuts, - Anchoring: Devices Permanently Placed In The Ground, Anchored In Concrete Class Min. C16/20. - Foundations Anchoring Playground Equipment Should Be Made In Accordance With The Pn-En 1176-1 Standard, - Foundations Should Be Made So As Not To Pose A Threat And The Upper Surface Of The Foundation Should Be Placed At Least 30 Cm Below The Designed Play Surface, Anchoring Method In Accordance With The Instructions Of The Device Manufacturer. - Safety Zones Should Be Constructed In Accordance With The Attached Technical Documentation, Taking Into Account The Indications And Guidelines Of The Manufacturers Of The Installed Devices And Play Sets, - Safe Surfaces Should Be Constructed In Accordance With The Attached Technical Documentation, Taking Into Account The Indications And Guidelines Of Manufacturers Of Installed Equipment And Play Sets. The Detailed Scope Of Construction Works Was Included In The Technical Documentation And Bill Of Quantities Attached To The Procedure. General Requirements Of The Ordering Party: 1) The Ordering Party Attaches To The Procedure The Bill Of Quantities, Which Are Only Of An Auxiliary Nature! 2) If The Designed Devices Are Not Available, The Ordering Party Allows The Offer Of Similar Devices, Having The Same Functionalities Or Operating Characteristics As The Designed Devices, Provided That Safety Zones Are Maintained And The Distance And Approximate Size Of The Devices. 3) Old Devices That The Ordering Party Has And Which Are The Subject Of Renovation Works Are Subject To A Shortened, 1-Year Warranty Period. 4) When Submitting An Offer, The Contractor Must Include In The Costs: Fees For Utilities (Water, Energy, Garbage, Security, Disposal And Waste Disposal).5) Costs Related To The Disposal Of Construction Waste, Risks Related To Safety And Civil Liability, Costs Of Possible Drainage Of The Construction Site, Costs Of Construction Insurance, All Costs Related To The Ongoing Construction Not Listed In The Bills Of Quantities Should Be Included In The General Construction Costs. 6) The Contractor, As A Waste Producer, Is Obliged To Remove And Dispose Of Waste (E.G. Rubble, Soil, Etc.) In Accordance With The Waste Act (Export, Storage And Disposal On The Part Of The Contractor). The Ordering Party Allows A Tolerance Of Up To +/- 10% Difference In The Given Dimensions Of The Devices, Provided That The Functionality, Safety Zones And Required Materials Described In The Technical Documentation Are Maintained.