Request For Quotation A Set For The Maintenance Of Biyovent Ventilators According To The Technical Specification

Oxygen Sensor For Biyovent Ventilator 1. Measurement Range: From 0 To 100% Oxygen At Atmospheric Pressure. 2. Nominal Service Life Of The Sensor: Not Less Than 500,000% Oxygen Hours By Volume. 3. Output Voltage In The Environment: From 9 Mv To 13 Mv 4. Electrical Interface: 3-Pin. 5. Accuracy: Must Meet The Requirements Of Iso 80601-2-55. 6. Working Temperature From 0°C To 50°C. 7. Pressure Range From 0.6 Bar To 2 Bar. 8. Working Humidity From 0% To 99% Relative Humidity Without Condensation 9. Storage Temperature: From -20°С To 50°С. 10. Warm-Up Time: No More Than 30 Minutes After Replacing The Sensor. 11. Long-Term Drift Of Oxygen Output: - No More Than 1% Of Oxygen Volume Per Month; - - Not More Than 15% During The Service Life. 12. Installation Of The Oxygen Sensor To The Ventilator Must Be Carried Out By A Specialist Certified By The Biyovent Ventilator Manufacturer. Any Damage Detected During The Installation Of The Oxygen Sensor Is The Responsibility Of The Supplier Company. The Delivery Is Considered Complete Upon Successful Completion Of The Internal Calibration Of The Oxygen Sensor In Service Mode. The Warranty Period Of The Oxygen Sensor Is 6 (Six) Months. As A Result Of Detection Of Production Defects, The Oxygen Sensor Or Its Parts Will Be Replaced With New Ones., 221 143.75, 97 342.86