Bids Are Invited For Electronic Auction With Price Registration For Acquisition Of Electrical Material, Concrete Posts And Tubular Support For Use In The Maintenance Of Public Lighting Which Will Be Used To Meet The Demands Of The Secretariats Of The Municipality Of Lucas Do Rio Verde - Mt.

Base For Photoelectric Relay, Body In Polyethylene Highly Resistant To Ultra-Violet Rays, Weather-Resistant Mounting Socket With Insulating Power, Tin-Plated Brass Contacts For Good Connection With Mounted Metal Support, Standard Energisa Luminaire Arm 1 Mt Of Galvanized Steel , Bracket For Energisa Standard Luminaire 3Mts Of Galvanized Steel, Triplex Aluminum Insulation Type Electrical Cable 0.6/1Kv 10 Mm², Triplex Aluminum Insulation Type Electrical Cable 0.6/1Kv 16Mm², Flexible Epr Or Xlpe Insulation Cable 0.6 /1Kv 6Mm2 Note: Roll Of 100 Meters, Epr Or Xlpe Insulation Flexible Cable 0.6/1 Kv 16 Mm2, Pvc Insulation Flexible Cable 750 V 70° 2.5Mm2 Black, Multiplexed Aluminum Insulation Cable 0.6/1Kv 16 Mm2, Quadruplex Aluminum Multiplexed Cable 0.6/1Kv Insulation 10 Mm2, Pp Cable 2 X 10 Mm2 Epr Or Xlpe Insulation 0.6/1Kv, Pp Cable 2 Mm2 Insulation Epr Or , Elastomer And Electrolytic Copper, Main Conductor 25-150Mm2, With Derivation Conductor 25-150Mm2, With Insulation In Xlpe/Pe 0, According To Nbr 5370, Main Conductor 10-16Mm2, With Derivation Conductor 6-16Mm2, Main Conductor 35-150Mm2 , With Derivation Conductor 45-100Mm2, Piercing Connector Main Conductor: 10Mm2-95Mm2 Derivation: 1. 5Mm2-10Mm2 Cdp-70, Metallic Vapor Tubular Lamp 2000W/380V - E -40, Metallic Vapor Lamp Power 250 W, Tubular Bulb , E-40 Base, Minimum Luminous Flux 20,000 Lm, Minimum Luminous Efficiency 80 Lm/W, Minimum Useful Life 10,000 Hours, Minimum Color Temperature 4200 K., Metallic Vapor Lamp Power 400W, Minimum Luminous Flux 32,000 Lm, Luminous Efficiency Minimum 80 Lm/W, Aluminum Luminaire For 1 Mt Braco E-40, Aluminum Luminaire For 3 Mts Braco With E-40 Socket, Luminaire For Led Public Lighting, With Maximum Power Of 100 Watts, Automatic Bivolt (100 - 250 V) – 60 Hz; Power Factor Greater Than Or Equal To 0.92; With Internal Class Ii Surge Protective Device 10 Kv / 10 Ka; Color Temperature 5000K; Minimum Luminous Flux Of The Luminaire Of 13500 Lumens (Tolerance Of 5%); With Minimum Luminaire Efficiency Of 135 Lumen/Watt (5% Tolerance); With Minimum Color Rendering Index Of 70; Type Ii Average With Fully Limited Or Limited Distribution Control; With Nema/Ansi 3-Pole Photo-Controller Relay Socket; With Photocell; With Aluminum Alloy Body Injected Under High Pressure, With Corrosion-Resistant Epoxy Painting In Gray Color; With Minimum Protection Index Ip-66; Minimum Degree Of Protection Against Mechanical Impacts Ik-08; Minimum Lifespan Of 50,000 Hours; Fit For Arms From 48 Mm To 60.3 Mm (+0 / -0. 3 Mm); Depreciation Index L70 (Maximum Loss Of 30% Of The Initial Luminous Flux After 50000 Hours); Minimum Total Quality Guarantee Of 5 Years For The Entire Set (Replacement In Case Of Equipment Defect); Luminaires Supplied Completely Assembled And Ready To Be Connected To The Distribution Network At The Voltage Specified With Inmetro Seal., With Maximum Power Of 150 Watts, 92; With Internal Class Ii Surge Protective Device 10 Kv / 10 Ka; Color Temperature 5000K; Minimum Luminous Flux Of The Luminaire Of 20250 Lumens (Tolerance Of 5%); With Minimum Luminaire Efficiency Of 135 Lumen/Watt (To