Bids Are Invited For Acquisition Of Blasting Equipment

Blasting Equipment Pressure Cabinet 700X700x7002.1 - Cabinet Made Of #14 Carbon Steel Sheet, Welded Type, Complete With Jet Compartment, Pneumatic Jet Nozzle Drive System, Exhaust System, 01 Light, 01 Electrical Control Button, Mixed Pvc / Canvas Gloves, Large Visor.2.1.1 - Items Included With The Cabinet:05 Meters Of 1/2 Jet Hose;01 Short Venturi Nozzle 3/16 Mm;Quick Couplings, Control Valves And Connections01 Dosing Valve Abrasive Diaphragm 3/4; 01 Set For Activating Blasting, By Pedal Valve; 1 Hp Three-Phase Motor 220/380 V; 2.2 - Doors Built In Carbon Steel Plate #14 With Reinforcements, Cushion Type, Providing Better Sealing Against Dust And Exit With Quick Locks.2.3 - Blasting Gun Blasting Will Be Carried Out By A Hexagonal Gun, With A Ø 4.8 Mm Nozzle And Activated By A Foot Valve. A Nozzle/Air Gun With Manual Control Has Been Provided To Clean The Parts, Removing The Dust At The End Of Blasting.2.4 - Starter Keysit Was Planned To Install An On/Off Button Switch, To Control The Internal Lighting And To Activate The Extractor Fan Motor.2.5 - Lighting Set With 02 (Two) 100 W (One Hundred Watt) Incandescent Lamps ) Each Installation On A 220/380V Electrical Network. Ordinary 03 Mm (Three Millimeter) Glass, The Lighting Of The Blasting Compartment Will Be Provided By 01 (One) Set. 2.6 - Dust Collector Dirty Air And Extremely Fine Abrasives Are Exhausted From The Compartment Blasting Machine And Routed To A Balloon Filter Type Dust Collector That Accompanies The Equipment. 2.7 - Blasting Machine Comes With A Blasting Machine Located In The Lower Part Of The Cabinet: Model Sjgp-1000, Single Chamber, Stationary, With One Outlet. Seventy Liters) Of Abrasive (Approximately 200 Kg).Hydrostatically Tested At 150 Lbs/Pol2.According To Standard Asme Section Viii And Nr-133.1 - Painting Ornamental Equipment...