Tenders Are Invited For Modernization Of The Pier At The Municipal Swimming Pool On The Ołów Lake In Ryn

The Subject Of The Order Is The Modernization Of The Pier At The Municipal Swimming Pool On The Ołów Lake In Ryn, Which Includes The Replacement Of The Structure And Sheathing Made Of Pine Wood With A Structure And Sheathing Made Of Pressure-Impregnated Larch Wood. The Platform Area Is 564.6 M2. Platform Boards Made Of Larch Wood, Grooved, With A Cross-Section Of 50X150 Mm, 3 M Long. Fastening The Boards With Screws Fi 6/100 (Two Screws Combined), Made Of Stainless Steel, To Wooden Logs With A Cross-Section Of 60X120 Mm (Edge ​​Beams), 120X120 Mm (Central Beams). 60X120 Mm Logs Are Fastened To The Upper Strips Of Steel Beams With Pairs Of M8/100 Screws, Galvanized, With Recessed Heads, At A Longitudinal Spacing Of 1.2 M. The Middle Beams Are Based On Crossbars Made Of I 120 Pe At A Spacing Of 2.5 M. Connections Between Metal Pins, And The Middle And End Beams, As Well As The Deck Boards, Roofing Felt Should Be Used To Separate The Joints Of The Boards To The Structural Logs And The Metal Deck Pins. Wooden Elements Should Be Made Of Seasoned, Air-Dry Wood, Class K30 (C30), Protected Against Biological Corrosion By Deep Vacuum-Pressure Impregnation. Scope Of Modernization: − Demolition Works (Hand Over The Demolition Material To The Ordering Party), − Disassembly Works Of Ladders (Disassembly And Cleaning), Lifebuoy Holders (Disassembly, Cleaning And Powder Coating In Gray) And The Mast Under Case Number: Zp.271.5.20243 Signaling Flag (Disassembly, Cleaning And Repair Of The Reel And The Rope Retracting The Flag), − Disassembly Works Of The Steel Structure Of The Platform Railings (Disassembly , Cleaning And Anti-Corrosion Protection, If Necessary), − Replacement Of The Wooden Structure Of The Platform (In Accordance With The Attached Drawings, Use Pressure-Impregnated Larch Wood), − Replacement Of The Wooden Deck Covering (In Accordance With The Attached Drawings, Use Pressure-Impregnated Larch Wood, Board Grooved, Dimensions 150X50 Mm, Fastened To The Structure With Stainless Steel Screws, 2 Screws In The Place Where The Boards Meet The Structural Beams), -Replacement Of The Wooden Sheathing Of The Platform Railings (According To The Attached Drawings, Use Pressure-Impregnated Larch Wood), -Installation Of Platform Ladders , Lifebuoy Hooks, Flag Pole And Umbrella Pole Holders And Rescuer Equipment Holders (Places Marked In The Drawing), − Use Seasoned Wood.