Tenders Are Invited For Delivery Of Materials For The Expansion Of The Water Supply And Sewage Network In The Wiązownica Commune In 2024.

4.1 The Subject Of The Order Is The Successive Delivery Of Brand New Materials Intended For The Expansion Of The Water Supply And Sewage Network In The Wiązownica Commune, According To The Table Below.4.2 The Ordering Party Does Not Anticipate Submitting Partial Offers.4.3 The Detailed Scope/Range Of Supplies Is Specified In The Appendix To The Swz.4.4 All Delivered Materials Regarding Materials Intended For The Expansion Of The Water Supply And Sewage Network Should Meet The Technical Parameters Described Below: 1) Hd Pe Pipe Ø 160 - Pressure Pipe Pn 10 Sdr 17 With A Diameter Of 160 Mm, With A 9.5 Mm Wall, 12 M Long, With The Polish Standard Pn-En 12201 -2, Made Of Polyethylene (Pe Hd), Black With Blue Stripes2) Pe Hd Pipe Ø 140 - Pressure Pipe Pn 10 Sdr 17 With A Diameter Of 140 Mm, With A Wall Of 8.3 Mm, A Length Of 12 M, With The Polish Standard At Itb-15 -8216, Made Of Polyethylene (Pe Hd), Blue With White Stripes, Intended For Transmitting Treated Drinking Water And Social And Domestic Sewage. 3) Pe Hd Pipe Ø 125 - Pressure Pipe Pn 10 Sdr 17, With A 7.4Mm Wall, 12M Long, With The Polish Standard Pn-En 12201-2, Made Of Polyethylene (Pe Hd) In Black With Blue Stripes, Intended For For Transmitting Treated Drinking Water And Social And Domestic Sewage. Pipes Made Of The Highest Quality Materials Can Be Combined With A Wide Range Of Pressure Fittings.4) Pressure Pipe Pn 10 Sdr 17 With A Diameter Of 110 Mm, With A Wall Of 6.6 Mm, With A Length In The Coil In Accordance With The Polish Standard Pn-En 12201-2, Made Of Polyethylene ( Pe Hd) In Black With Blue Stripes, Is Intended For Transmitting Treated Drinking Water And Social And Domestic Sewage. 5) Pe Hd Pipe Ø90 - Pressure Pipe Pn 10 Sdr 17 With A Diameter Of 90Mm, With A Wall Of 5.4Mm In A Circle / In 12M Sections, With The Polish Standard Pn-En 12201-2, Made Of Polyethylene (Pe Hd), Black With Blue Stripes6) Pe Hd Pipe Ø 75 - Pressure Pipe Pn 10 Sdr 17 With A Diameter Of 75Mm, With A 4.5Mm Wall In A Coil / In 6M Sections, With The Polish Standard Pn-En 12201-2, Made Of Polyethylene (Pe Hd) In Black With Blue Stripes.7) Pe Hd Pipe Ø 63 - Pressure Pipe Pn 10 Sdr 17 With A Diameter Of 63Mm, With A 3.8Mm Wall In A Coil, With The Polish Standard Pn-En 12201-2, Made Of Polyethylene (Pe Hd) In Black With Blue Stripes.8) Hd Pe Pipe Ø 50 - Pressure Pipe Pn 10 Sdr 13.6 With A Diameter Of 50 Mm, With A 3.7 Mm Wall In A Circle, With The Polish Standard Pn-En 13244-2, Made Of Polyethylene (Pe Hd) In Blue.9) Hd Pe Pipe Ø 40 - Hd100 Pe Pipe 40/3.7 Pn 16 10) Electrofusion Fittings: Pe100, 16 Bar, With A System For Automatic Recognition And Reception Of Welding Parameters, With A Plug Containing A Resistor Enabling Automatic Identification Appropriate Time Required To Perform The Weld, Signal Indicator Indicating The Correct Pressure, Embossed Welding Parameters, Permanent Marking Of The Batch Number, Barcode Containing Welding Parameters For Welding Machines Equipped With Barcode Readers, Internal Limiters.11) Pe100 Sdr17 Segmented Fittings Manufactured In Accordance With The Polish Pn Standard -En 12201–3+A1.2013-05P – Plastic Pipe Systems For Water Transmission And For Pressure Storm And Sanitary Sewage Systems – Polyethylene (Pe) Fittings Made Of Pipes In Accordance With The Polish Standard Pn-En 12201 By Manufacturers With Iso Certificates 9001 And Iso 14001, From Pure Raw Material Without The Addition Of Regranulate. 12) Cast Iron Fittings: Made Of Ductile Iron En-Gjs 500-7. Covered With An Anti-Corrosion Coating Based On Epoxy Resin, Min. 250 According To The Pn-En Iso 12944-5:2009 Standard. Hygienic Certified By The National Institute Of Hygiene For Drinking Water. Working Pressure Pn10/Pn1613) Butt Fittings: Made Of Polyethylene Pe 100, Pn-En 12201 And En 1555, Black, Used For Water Transmission, Connected Using A Butt Welding Machine Or Electrofusion Fittings. 14) Long Flange Sleeve 90/80 Sdr 17 - The Flange Sleeve Is An Element That, Together With The Clamp (Galvanized Flange), Allows The Transition From Any Flange To A Polyethylene Pipe:• Long Version Enabling Both Butt And Electrofusion Welding• Fits The Dn80/90 Flange • Dimensions Of The Pe Pipe 90X4.5 Mm15) Galvanized Flange Dn 80/90 - Galvanized Flanges Used To Connect Flanged Fittings And Pipe Sections With Pe Sleeves. Fits A Dn 80 Flange, Allows Connection To A 90Mm Pipe.16) Drilling Clamp With A Flange Outlet For Pe Pvc Pipes: Working Pressure Pn 16, Body Made Of Ductile Iron En-Gjs-500, Anti-Corrosion Protection Powder Paint (Polyester-Epoxy), Ral 5005 Coating Thickness 250 Μm÷300 Μm, Rubber Inserts Glued In The Inner Part Of The Clamp To Prevent Rotation On The Pipe, Screws, Nuts And Washers Made Of Galvanized Or Stainless Steel A2/A4, Hole Spacing In The Flange In Accordance With The Pn-En 1092-2:199917 Standard ) Pvc Pipe Ø 250X6.2, Sn 4, Class N Sdr 41, Foamed Pvc-U External Sewage Pipes With A Sn4 Foamed Core. Pipes Meeting The Requirements Of The Pn-En 13476-2 Standard. Chemical Resistance Of Pvc-U Material And Gaskets In The Ph Range 2-12, Marked, Socket-Connected With A Gasket.18) Pvc Pipe Ø 200X4.9, Sn 4, Class N Sdr 41, Foamed Pvc-U External Sewage Pipe With A Core Foamed Sn4. Pipes Meeting The Requirements Of The Pn-En 13476-2 Standard. Chemical Resistance Of Pvc-U Material And Gaskets In The Ph Range 2-12, Marked, Socket-Connected With A Gasket.19) Pvc Pipe Ø 160X4.0, Sn 4, Class N Sdr 41, Foamed Pvc-U External Sewage Pipes With A Core Foamed Sn4. Pipes Meeting The Requirements Of The Pn-En 13476-2 Standard. Chemical Resistance Of Pvc-U Material And Gaskets In The Ph Range 2-12, Marked, Socket-Connected With A Gasket.20) Pvc Pipe Ø160x4.7, Sn 8, S Sdr 34 - External Pvc Sewage Pipe With A Solid Wall, Manufactured With Class Peripheral Stiffness Sn8. Pipes Comply With The Requirements Of The Pn-En 1401-1 Standard. Chemical Resistance Of Pvc-U Material And Gaskets In The Ph Range 2-12, Marked, Socket-Connected With A Gasket.21) Pvc Pipe Ø200x5.9, Sn 8, S Sdr 34 - External Pvc Sewage Pipe With A Solid Wall, Manufactured With Class Peripheral Stiffness Sn8. Pipes Comply With The Requirements Of The Pn-En 1401-1 Standard. Chemical Resistance Of Pvc-U Material And Gaskets In The Ph Range 2-12, Marked, Socket-Connected With A Gasket22) Corrugated Stem Pipe: Made Of Polypropylene (Pp) Resistant To Chemicals, Impacts And Low And High Temperatures. It Is One Of The Elements Of A Plastic Inspection Chamber 315 For Sewage Or Drainage. They Are Also An Element Connecting The Base With The Telescopic Tube. The Shaft Pipe Is Made Of Pp Polypropylene By Injection, Can Be Cut Using A Hand Or Mechanical Saw.23) Channel Manhole Dn 600, 40T, Class D400 Without Ventilation, Round, Free Clearance Ø600mm, On A Hinge, With 2 Latches, Full-Cast Iron Body, With Ductile Iron Ggg50, Standard En 124 Din 1229. Set: Body + Cover. 24) Channel Manhole Dn 600, 25T: Cast Iron Round Manhole, Gravity Class C250 (25 Tons, 250Kn), Made Of Gray Cast Iron, Height 150Mm. Cast Iron Round Manhole, In Gravity Class C250 (25 Tons, 250Kn), Made Of Gray Cast Iron, Height 150Mm25) Channel Manhole Dn 600, 12.5T: Cast Iron Round Manhole, In Gravity Class B125 (12.5 Tons, 125Kn), Intended For Roads And Areas Pedestrians, Sidewalks, Parking Lots And Passenger Car Parking Areas, Made Of Gray Cast Iron, Height 45Mm 26) Channel Manhole Dn 600, 5T, Class D400 Cast Iron Round Manhole, Gravity Class A15 (1.5 Tons, 15Kn), Intended Only For Pedestrian Traffic And Bicycle, For Green Areas, Made Of Gray Cast Iron, Height 50 Mm27) Above-Ground Hydrant Dn 80-100, Installation Depth - 1500 - Automatic Complete Drainage When The Flow Is Fully Cut Off, Stainless Steel Stem With Rolled Thread And Integrated Stem Collar, Stem Seal O-Rings, O-Ring Sealing Zone Of The Plug Separated From The Medium, Sealing Plug Made Of Pressed Brass, Secured With A Special Ring Against Unscrewing, Shut-Off And Closing Element (Plug) Completely Vulcanized With Epdm Rubber, Coat Of Arms, Opening Start <3 Turns, Full Opening 8 Rpm, Mot 80Nm, Mst 250Nm, Internal And External Materials Resistant To Corrosion, Hydrant Column Made Of Ductile Iron Pipe (Coated With A Layer Of Zinc), Anti-Corrosion Protection Coating Based On Uv-Resistant Epoxy Resin, Minimum 250 Microns According To The Pn-En Iso 12944 Standard -5:2009, Resistant To Disinfectants (Suggested Naoci Solution), Flange Connection And Connections According To Pn-En 1092-2:1999 (Din 2501), Working Pressure Pn 16, Socket 1Xa 110 According To Din 14319, Control Key According To Pn 89 /M-74088, Product Compliance With Pn-En 1074-1 And 6:2002 And Pn-En 1438:2009 Type A, Closure Tightness 1.1 Pn, Body Strength 1.5 Pn. Hydrant Color Red28) Drilling Point - Self-Drilling Gate Valve Ncs Pn16 For Pe/Pvc Ø160x2, Ø110x2, Ø90x2 - Working Pressure Pn16, Threaded Connection According To Pn-En 228-1, Requirements And Tests According To Pn-En 1074-1 And 2, Drilling Under Pressure Without Using A Drilling Apparatus. Stainless Steel Drill With Laser-Made Blades, Base And Clamp Fully Lined With Rubber, Internally And Externally Protected Against Corrosion With Ral 5005 Epoxy Powder Paint, 250 Μm Thick And 3Kv Puncture Resistance.