Tenders Are Invited For Klystrons - Components And Services Necessary For The Installation, Testing And Commissioning Of The High-Power Radio Frequency Assembly

Klystrons - Components And Services Necessary For The Installation, Testing And Commissioning Of The High-Power Radio Frequency Assembly. The Purpose Of This Award Procedure Is The Acquisition Of Equipment And Services Composed Of All The Components Listed Below And Detailed Below In The Specifications: • 50 Mw Klystron Type Equipment, Composed Of Klystron, Focusing Magnet, X-Radiation Shield. The Operation Of The Equipment Generates X-Radiation, Being Thus Included In The Class Of Equipment Producing Ionizing Radiation According To Cncan And Eu Legislation; • 600W And 200W Rf Amplifiers; • Oil For Modulators; • Installation, Testing And Commissioning Services For 5 Modulators Type K300 And 1 Modulator Type K100 With Resistive Load From Which At Least The Following Parameters Can Be Recorded: Applied Voltage (V), Pulse Length (Μs), Pulse Repetition Frequency (Hz), Filament Current (A), Power Supply Current For The Power Magnet (A), Voltage On The Dividing Capacitor (Kv), Transformer Output Current (A), Three-Phase Circuit Measurements (Voltage Between Phases, Frequency, Current, Power And Power Factor), Single-Phase Circuit (Voltage Between Phases, Line Current), Voltage Amplitude Per Pulse At The Output Of The Capacitive Divider, Pulse Intensity; • Installation, Testing And Commissioning Services For Modulators With Klystron, Focusing Magnet And Radiation Shield (5 Xk300, 1Xk100), Hereinafter Referred To As High Power Rf Electromagnetic Wave Generator System, With The Test Systems Delivered By The Contractor Composed From, Waveguides, Electromagnetic Wave Dispersion Loads Of 50Mw, Rf Connectors, Rf Cables, Sf6 Type Gas Filling Kit, Gaskets, Attenuators, Rf Windows, Rf Flange Adapters, Including Their Conditioning Operations Before Testing At 30Mw From Which At Least The Following Parameters Can Be Obtained: The Average Power At The Klystron, The Maximum Power Of The Klystron Beam, The Stability Of The Pulse At The Maximum Power Measured 30Mw, The Frequency Of The Pulse, The Length Of The Pulse At The Maximum Power Measured, The Stability Of The Amplitude Of The Pulses, The Rate Of Increase And Decrease Of Pulse Voltage Over Time, The Power (Dbm And W) Of The Generated And Reflected Wave Measured And Calculated; • Testing And Commissioning Assistance Services For High-Power Rf Electromagnetic Wave Generation Systems, Modulator/Klystron/Focusing Magnet, Together With The Waveguide Systems Owned By The Contracting Authority, Through Which The Contractor Will Supervise The Personnel Of The Contracting Authority During The Start-Up Of The System And The Gradual Raising Of The Power And Give You Indications For The Stabilization Of The Vacuum Level And The Power Of The Electromagnetic Wave Recorded During The Conditioning Activities Of The Waveguide System Owned By It, With The Indication Of The Important And Stabilizing Parameters Of The Wave Generation System Electromagnetic. • Training Services For Personnel Indicated By The Contracting Authority.