Tenders Are Invited For Preparation Of Design Documentation For The Task Titled: Reconstruction Of The District Road In Kamień

I. Subject Of The Order: Development Of Design Documentation For The Task Titled Reconstruction Of The District Road In Kamień1. Does The Public Procurement Concern A Project Or Program Co-Financed By The European Union?No2. Name Of The Project Or Program Co-Financed By The European Unionnot Applicable3. The Name Of The Project Or Program Co-Financed From Other Funds Does Not Applyii. Description Of The Subject Of The Order: Development Of Design Documentation For The Task Titled: Reconstruction Of The District Road In Kamień1. Description Of The Existing Conditionthe District Road In Kamień Is A Through Road With A Road Cross-Section With Roadsides On Both Sides. It Is Located In An Undeveloped Area, On The Left Side Directly Adjacent To The Road Of The S7 National Road. On The Right Side Of The Entire Planned Reconstruction, There Are Fields, Meadows And A Small Water Reservoir, Along The Road Ditch And Entrances To The Plots Adjacent To The Road. Bituminous Road Surface, 6.0 M Wide, In Good Technical Condition, Dirt Shoulders On Both Sides, 0.75 M Wide. On The Section Planned For Reconstruction, The District Road Has One Intersection With A Paved Municipal Road. There Is Technical Infrastructure In The Road Area. Attachment No. 1 Shows The Route Of The Road To Be Designed.2. Assumptions For Design2.1. Design Data: 2.1.1 As Part Of The Reconstruction, A Pedestrian Sidewalk Should Be Designed Located Directly Next To The Road, Separated From The Road Edge By A Light Curb Placed On A Concrete Footing. From The Outside, There Is A Concrete Rim With A Thickness Of 8Cm Placed On A Concrete Bench. Planned Width Of The Sidewalk - Minimum In Accordance With Applicable Regulations. The Sidewalk Surface Is Made Of Gray Paving Stones, The Surface Of Exits Is Made Of Graphite Paving Stones. Road Drainage Should Be Designed Within The Road Area. 2.1.2 Road Drainage:1. Due To The Existing Road Ditch On The Right Side, Drainage Should Be Planned Using It. - If It Is Not Possible To Drain Water In The Above-Mentioned Manner, Other Technical Solutions Should Be Proposed.2.2 The Documentation Should Be Prepared In Accordance With Applicable Regulations And Principles Of Technical Knowledge.2.3 The Design Documentation Should Be Complete In Terms Of The Purpose It Is To Serve.2.4 Documentation Design Will Be The Basis For The Implementation Of Construction Works.2.5 Design Documentation, Bill Of Quantities And Technical Specifications For The Execution And Acceptance Of Works Should Be Developed In Accordance With The Principles Set Out In The Regulation Of The Minister Of Infrastructure, Development And Technology Of December 20, 2021 On The Detailed Scope And Form Of Design Documentation, Specifications Technical Execution And Acceptance Of Construction Works And The Functional And Utility Program. The Bill Of Quantities Should Take Into Account The Maximum Possible Consolidation Of Individual Construction Works. At The Stage Of Preparing The Bill Of Quantities, It Is Required To Make Arrangements With The Ordering Party Regarding The Form, Scope Of The Bill Of Quantities And The Method Of Consolidating The Bill Of Quantities Items.