Tenders Are Invited For Reconstruction And Change Of Use Of The Building Of The Former Community Center Into The Public Library Building In Babimost

1. The Subject Of The Order Is The Reconstruction And Change Of Use Of The Building Of The Former Community Center Into The Public Library Building In Babimost. List Of Main Construction And Installation Works: 1) Demolition Of Some Partition Walls And The Ceiling Of The Existing Mezzanine; 2) Replacement Of Windows And Doors; 3) Replacement Finishing Layers Of Floors;4) Thermal Insulation Of Floors;5) Finishing Of Walls And Ceilings;6) Installation Of Electrical, Sanitary, Central Heating, Ventilation And Lightning Protection Installations;7) Installation Of Lighting Using Energy-Saving Light Sources;8) Purchase And Installation Of A Vertical Platform – Internal Elevator;9) Construction Of A New Building Façade;10) Replacement Of Roofing Felt With Heat-Welded Roofing Felt On Flat Roofs;11) Land Development;12) Purchase, Delivery And Installation Of Equipment. Details Of Finishing Works And Expansion: - Install Internal Window Blinds On The Ground Floor, 100% Darkening, - External Facade - Mineral Wool, Thin-Layer Plaster, - Main Roof Of The Building - Is Not Subject To This Order, This Provision Excludes The Renovation Of The Main Roof, - In The Eastern Facade Of The Building - On The First Floor - Use 4 Pcs. Slotted Windows (Width Approx. 60Cm-70Cm) In Places Of The Existing Joinery, Frosted Glass, - Northern Facade - Uncover The Covered Stairs - Entrance To The Basement - And Cover With Anti-Slip Tiles, Install A Stainless Steel System Handrail, Provide For The Installation Of An Absorption Well With A Capacity Of Up To 100 Liters, Well Covered With A Grid. Install A Stainless Steel Barrier, Approximately 60 Cm High, On The Wall Leading Down To The Basement. Over The Entrance To The Basement (Above The Door), Install A Suspended, System Roof With Safety Glass, - Install The Entrance Door To The Basement With Fire Resistance Class Ei60, - Provide For Closing The Existing Opening In The Ceiling Above The Existing Descent To The Basement. Concrete The Hole (Entrance To The Basement Will Be From The Outside Of The Building), - A Photovoltaic Installation With A Capacity Of Up To 10 Kw Should Be Provided On The Flat Roof On The Eastern Side Of The Building, Along With Connection To The Network, - It Should Be Planned To Provide Lighting To The Front Façade Of The Building From The Northern Side: 8 Pcs. . Double-Sided Led Facade Fixtures, - It Is Necessary To Demolish 2 Chimneys On The Eastern Part Of The Building Up To The Height Of The Flat Roof. Close The Chimneys With A Concrete Slab, Seal Them, Insulate Them, Insulate Them, - Land Development: Dismantle The Existing Surface Of Concrete Cubes On An Area Of ​​300 M2 And Make A New Surface On An Area Of ​​300 M2 Of Flamed Granite Slabs 60 Cmx120 Cmx6 Cm With Inserts Of Granite Cubes And Basalt Cubes In Graphite/Black On The Substructure Made Of Crushed Stone And Concrete, - Replacement Of Floor Finishes: Stage - Floor Panels, Small Ground Floor Room - Roll Carpet, All Other Rooms - Stoneware Tiles 60Cmx60cm. The Equipment (In Accordance With The Attached List) Must Be Presented To The Ordering Party For Approval Before Purchase. 13. Other Comments: The Subject Of The Order Must Be Performed In Accordance With Applicable Regulations, Including The Provisions Of The Construction Law, Occupational Health And Safety Regulations, Applicable Standards And In Accordance With The Arrangements And Instructions Of The Ordering Party. The Contractor Is Obliged To Agree On The Work Schedule With The Ordering Party. The Trademarks, Patents Or Origin Of The Goods Indicated In The Description Of The Subject Of The Order Should Be Understood As Specifying The Required Minimum Technical Parameters Or Quality Standards. The Ordering Party Allows The Submission Of Equivalent Offers Using Materials And Devices Other Than Those Described, Provided That They Guarantee Technical, Operational And Quality Parameters Not Worse Than Those Assumed In The Swz. The Contractor Who Refers To Equivalent Solutions Is Obliged To Demonstrate That The Materials And Devices He Offers Meet The Requirements Specified By The Ordering Party. The Burden Of Proving That The Product Is Equivalent To The Requirement Specified In The Swz By The Ordering Party Rests With The Contractor. If The Contractor Finds That The National Standards Or European Standards Or International Standards Used In The Swz And In The Annexes To The Swz May Indicate The Producers Of The Products Or Their Sources Of Origin, Then The Ordering Party Allows Equivalent Solutions In This Respect. This Means That The Technical Parameters Of The Products Indicated In This Way Determine The Minimum Expectations Required By The Ordering Party As To The Quality Of The Products To Be Used To Perform The Subject Of The Contract. Moreover, In Each Case, Stating That The Description Or Feature Of The Described Product, Which May Indicate The Source Of Origin Or Manufacturer, The Contractor Is Also Entitled To Use Equivalent Products, Which Means Those With Technical Parameters Not Worse Than Those Indicated In The Swz And/Or In The Annexes To The Swz. It Is Also Allowed To Demonstrate This Equivalence With Standards Equivalent To Those Indicated In The Opz. The Burden Is On The Contractor To Indicate Equivalence. When Selecting Equivalent Materials, The Contractor Is Also Obliged To Ensure The Achievement Of The Indicators Specified In The Opz. The Proper Names Of The Materials, Their Trademarks, Parameters, Elements And Devices, Etc. Quoted In This Project Are Auxiliary And Exemplary. They Are Cited To Define The Expected Quality Or Technical Standard. Therefore, It Is Allowed To Use Replacement Elements, Materials And Devices - Equivalent To The Documentation, With No Worse Technical, Qualitative And Functional Parameters, Meeting The Minimum Parameters Specified By The Design And Technical Specifications, After Consultation With The Ordering Party And Obtaining The Ordering Partys Consent.