Tenders Are Invited For Construction Of An Active Adventure Park In Ulina Wielka, Gołcza Commune

Part 1 - Construction Of A Zipline With Accompanying Infrastructure.1) The Subject Of The Order Includes: A) Construction Of A Zipline, Including A Starting Tower And A Landing Tower, Along With The Installation Of A Traction Rope And An Auxiliary Rope For Suspending The Braking System, B) Installation Of An Emergency Brake System. The Equipment Enables Braking Downhill Participants Using Magnetic Eddy Current Slowing Technology. The Brake Works Effectively On Descents With A Maximum Speed Of Up To 20 Km/H, Braking Is Progressive Over A Distance Of Up To 20 M. The Device Automatically Adjusts The Braking Force To The Speed And Weight Of The Participants. After Each Descent, The Brake Automatically Returns To Its Starting Position. The Device Is Resistant To External Conditions. As An Emergency Braking System, Additional Buffer Springs Should Be Used, Strung On The Traction Rope, Located In The Final Phase Of The Descent, With A Length Of At Least 2M. Additionally, The Structure Of The Landing Tower At The Anchorage Point Of The Traction Rope Must Be Secured With A Protective Mattress With A Thickness Of At Least 20Cm.C) Installation Of The Zipline Equipment With A Seat:• Zipline Pulley: Dedicated To Zipline Descents, Adapted To Work With A Steel Rope With A Diameter Of Up To 13Mm, Two Rollers Located In One Plane Ensuring The Stability Of The Pulley On The Zipline, Integrated, Ergonomic Carabiner Enabling The Instructor To Quickly Put On The Pulley With One Hand, Rotation Of The Carabiner In The Pulley Enabling A Constant Position On The Steel Rope When The Pulley Hits The Brake At The End Of The Zip Line, Front And Rear Stops To Protect Fingers From Getting Stuck, Brackets Allow For Placing Them In Carabiners So That They Do Not Rub Against The Steel Rope, Certification: Ce En 17109, Ce En 12278, Uiaa.• Pulley Handle: A Handle That Allows You To Hold Your Hands And Reduces The Risk Of Rotation During Zipline Descent, Helps You Maintain The Position With Your Legs Forward At The End Zip Lines.D) Delivery Of Individual Safety Equipment For Users Related To The Operation Of The Zip Line (10 Sets),• Harness: Hip Harness, Dedicated To Rope Parks, Universal Size, Fully Adjustable (Waist 60-125Cm, Thighs 35-85Cm) , Equipped With 3 Buckles Allowing For Complete Adjustment At The Waist And Thighs, Certification: Ce; En 12277:2015-C.• Helmet: Dedicated For Use In Rope Parks, Universal Size, Adjustable Circumference From 50 To 60 Cm, Can Be Dismantled In Order To Replace The Adjustment System For The Helmet Shell, Equipped With Ventilation Holes, Certification En 12492:2012.• Pulley Lanyard: Lanyard Made Of A Dynamic Rope With Factory-Made Loops At The Ends, A Cover On The Pulley Side That Stabilizes The Carabiner In The Right Position, Length Min. 45 Cm, En 17109:2020 Certification.• Lifeline Lanyard: Lanyard Made Of A Dynamic Rope With Factory-Made Loops At The Ends, On The Carabiner Side, A Cover Stabilizing The Carabiner In The Right Position, Length Min. 70 Cm, En 17109:2020 Certification.• Carabiner: Oval-Shaped Carabiner, Lock With Twist Lock Security, Strength 24 Kn, Certification: En 12275:2013-B; En 362:2004-B.E) Construction Of Accesses To The Starting Tower And The Landing Pad Tower As Well As The Recreation Area Made Of Concrete Paving Stones, F) Development By Authorized Persons Of The Construction, Workshop And Assembly Documentation Of The Starting Tower And The Zip-Line Landing Pad Tower Based On The Attached Technical Design, G) Execution Tests, Inspections, Obtaining Approval Certificates Authorizing The Ordering Party To Put The Facility Into Operation, Resulting From Specific Regulations In Force In This Regard,