Tenders Are Invited For Purchase Of A Large-Format Projection Screen + Accessories - Żdk Luna

4.1. The Subject Of The Order Is The Delivery Of A Large-Format Screen With Accessories, Assembly And Commissioning Of The Ordered Products - Compatible With Existing Ones4.1.1. Chain Winch (2 Pcs) Chain Hoist With A Single Chain With A Minimum Capacity Of 250 Kg, Powered By 3-Phase 400 V With Low-Voltage Control, Double Brake Located Behind The Engine And Clutch, Directly Connected To The Load, Must Ensure That The Load Is Maintained Even In The Event Of Engine Or Clutch Failure, 5 - Six-Chamber Load Chain Drive Wheel With 5 Intermediate Teeth, Electric Up/Down Limit Switch, Built-In Water Drainage From The Housing To Prevent Water From Collecting In The Drive Chamber. Possibility Of Suspending The Winch To A Structure In The Load Lifting Mode And Mounting It On A Load (E.G. Truss) In The Self-Climbing Mode. Adjustable Torque Limiter, Maintenance-Free Dc Disc Brake, Integrated Thermal Protection To Prevent Overheating. Housing In Black Or Dark Gray (Ral 7021). Fixing Hook And Rotary Load-Bearing Hook, Load-Bearing Hook Covered With Anti-Slip Rubber, Length Of The G100 Load-Chain In Black - Xxx M. Chain Bag Included, Made Of Polyester 1100. Weight Without Chain: Maximum 13 Kg, Noise Level Not Higher Than 55Db, Minimum Lifting Speed 4M/Min. Housing No Larger Than 37X15x18cm. List Of Standards And Regulations Met By Winches: Bgv-D8+ According To Sqp2, Safety Factor 8:1 In Accordance With The Machinery Directive 2006/42/Ec And The Electromagnetic Compatibility Directive 2014/30/Eu4.1.2. Controller (1 Pc) A Controller Designed To Control A Minimum Of 8 Electrically Compatible Low-Voltage Hoists Separately Or In Given Groups. • Manual Phase Detection And Correction System• Standard Wiring Enabling Optional Addition Of A Wired Remote Control• Power Supply: 400/415 V 3Ph ~ N– 50 / 60Hz.• Ce 32 A 5-Pole Power Socket• Short-Circuit Protection• Master/Slave Function: Possibility Of Connecting 2 Or More Controllers• Maximum Power Per Channel: 1.8 Kw / 400V 3Ph• Number Of Channels: Min. 8 4.1.3. Backstage (20 Pcs) Textile Panel, Dimensions 1.45 X 6.00 M, Without Wrinkles, Upper Edge With A Sewn-In Reinforcing Strip With Black Eyelets Every 25 Cm, Sides And Bottom Sewn. Fabric: High-Quality Wool Serge With A Weight Of Min. 410G/M2, Made Of 80% Wool 20% Other Plain Weave. It Is Required That The Fabric Has Good Damping Properties - Available Acoustic Tests Of The Material (According To Bs En Iso 354:2003), Alpha Coefficient 0.5-0.95, Class A-D. Permanently Fire Resistant Fabric To Bs5867 Part 2 Type B And En 13773. The Fabric Retains Its Fire Resistant Properties After Contact With Water. Roll Width Min. 150Cmcolor: Black4.1.4. Rotating Mechanism Of The Baffles (10 Pcs) Rotating Mechanism Of The Baffles Enabling Free Rotation Around The Axis And Locking The Baffle In Predefined Positions. Can Be Mounted To A Stage Truss. The Set Includes A 25 Mm Diameter Pipe, Powder-Coated Black, With A Length Of Min. 1.5 M. 4.1.5. Truss (2 M Section - 2 Pcs, 3 M Section - 6 Pcs) Substructure For Mounting Lighting Devices And Decorative Elements Based On A Stage Truss. Material: Aluminum Construction: 50 × 2 Mm Pipe And 20 × 2 Mm Slats, Equipped With Mounting Sockets Type: Quadro External Size : 290×290 Mm Including Fasteners For Individual Truss Sections 4.1.6. Projector (1 Pc) Laser Light Source With A Lifespan Of Min. 20000H When Working In Full Brightness Mode Native Resolution Wuxga, 1920X1200 Min. Brightness 10,000 Lm (For Both White And Colored Light, Measurements In Accordance With Iso 21118:2012, Iso Idms 15.4) Input Connectors: Min. 1X Hdbase-T; 1X Hdmi; 1X Dvi-D, 1X 3G-Sdi Output Connectors: Min. 1X Audio With The Function Of Deembedding Sound From Digital Sources, Also Working When The Projector Is In Standby Mode Min. 1X 3G-Sdi With The Ability To Transmit The Image To An External Monitor When The Projector Is In Standby Mode. Control / Communication: Rs-232C; Lan; Usb; Wired Remote Controllens: Interchangeable Optics, Electrically Controlled, Available Throw Ratios In The Range Of 0.64-0.77:1, Lensshift Function Vertical/Horizontal In The Range Of: 60% Vertical / 18% Horizontalutility Functions: • Image With A Diagonal Of Up To 500• Ability To Operate The Projector In Any Position • 24/7 Operation • Ability To Connect Sources With 4K Resolution (Hdmi, Hdbt) • Projector Control From A Web Browser - Osd Panel • Image Distortion Correction: Vertical/Horizontal Trapezoid; Corner Correction; Projection On A Curved Surface And In The Corner Of A Room, Vertical/Horizontal Image Linearity Correction, Point Correction On A Min. 30X30 Grid• Optional External Camera Dedicated By The Manufacturer Allowing For The Automation Of Stacking And Edgeblending Processes And Calibration Of The Projector Image; Software That Does Not Require License Fees To Support These Processes. Other Requirements: Manufacturers Software That Does Not Require License Fees To Monitor The Status Of The Projector, Black Casing 4.1.7. Screen (1 Pc) Electric Screen Working Surface 6000 Mmx3750 Mm, Total Width: 6100 Mm Format 16:10 Cassette In Black, Matte. Cassette Made Entirely Of Aluminum Wireless Control4.1.8. Hdmi Extender (1 Set) Hdmi Hdbaset Extender Up To 100 M Over A Single Cat 5E/6/6A Cable. Meets Hdmi Specifications Including 3D, Deep Color, Hd Lossless Audio Formats And Cec Pass-Through. Supports Dolby Digital 5.1, Dts Hd Audio And Video Signals At Resolutions Up To 4K. Supports Long Range Mode, Providing An Effective Solution For Extending Hdmi Signals Up To 150M Over A Single Cat 5E/6 Cable. 4.1.9. Hdmi Hdbaset Transmitter (1 Pc) Hdmi Hdbaset Transmitter Up To 100 M Over A Single Cat 5E/6/6A Cable. Meets Hdmi Specifications Including 3D, Deep Color, Hd Lossless Audio Formats And Cec Pass-Through. It Supports Dolby Digital 5.1, Dts Hd Audio And Video Signals With A Resolution Of Up To 4K. Please Attach Scans Of Catalog Cards And Ce Certificates Of The Offered Products To The Offer.4.1.10. Mandatory Local Visit!!! Due To The Retrofitting System, The Type Of Existing Devices And Installations Should Be Taken Into Account. The Obligation To Conduct An On-Site Inspection Does Not Apply To Contractors Who Carried Out An Inspection During The Procedure Announced On January 5, 2024. 4.2. The Contractor Will Provide The Ordering Party With The Delivery, Delivery, Assembly And Commissioning Of The Ordered Products As Well As Training Of Employees At The Ordering Partys Premises Within The Deadline Agreed By Both Parties. All Products Should Meet The Requirements Of Polish Standards Transposing European Standards Or Standards Of Other Member States Of The European Economic Area Transposing These Standards, Applicable In A Given Scope, They Should Be Homogeneous, Brand New, Free From Technical And Legal Defects And Not Refurbished, Have An Identifying Symbol Denoting A Specific Product. . All Elements Delivered As Part Of The Order Must Have The Approvals And Certificates Required By Law. The Contractor Will Provide The Ordering Party With Approvals, Certificates, Warranty Cards And Other Necessary Documents With The Delivery.