Tenders Are Invited For Reconstruction Of The District Road No. 1182K Bryzdzyń-Tunel -Miechów In The Towns Of Przybysławice, Łazy And Uniejów Rędziny At Km 5+385 - 8+375, Length 2.990 Km

The Subject Of The Order Is: Reconstruction Of The District Road No. 1182K Bryzdzyń-Tunel -Miechów In The Towns Of Przybysławice, Łazy And Uniejów Rędziny At Km 5+385 - 8+375, Length 2,990 Km. The Task Is Co-Financed By The Government Fund Polish Order: Strategic Investment Program, No. [Edycja6pgr/2023/4547/Polskilad]Description Of The Investmentthe Investment Involves The Reconstruction Of The District Road No. 1182K Bryzdzyn - Tunel - Miechów In The Towns Of Przybysławice, Łazy And Uniejów Rędziny At Km 5+385 - 8+375, Length 2.990 Km, Which The Aim Is To Improve Travel Conditions And Restore The Proper Technical Condition Of The Section Of The Main Communication Route Connecting The Kozłów Commune With The District Headquarters. The Project Will Be Implemented In The Lesser Poland Voivodeship, In The Miechów County, On The Section Of The District Road Connecting The Miechów Commune And The Kozłów Commune, Which In It Mainly Serves The Residents Of The Kozłów Commune For Everyday Commuting To Work And School And For Handling Official Matters At The District Headquarters And Other Matters In The Area Of ​​The Miechów District And The Małopolska Voivodeship. It Was In The Kozłów Commune That The State Agricultural Farm, Which Was Part Of The Trzebienice State Stud Farm, Was Located. One Of The Objectives Of The Investment In Question Is To Improve Living Conditions In Former State Farm Areas By Restoring The Appropriate Technical Parameters Of The Existing District Road Network. The Project Is Planned To Include: 1. Widening The Road Of The District Road To A Width Of 6.0 M 2. Strengthening The Sub-Base Along The Length Of The Section Using The Technology Of Making A Cement-Stabilized Sub-Base Layer, 3. Applying A Binder Layer Of A Mineral And Asphalt Mixture Along The Length Of The Section 4. Constructing A New Road Surface (Wearing Layer) From A Mineral And Asphalt Mixture Along The Entire Length Of The Section - 2,990 Km, 5. Improvement Of The Roadsides By Hardening On Both Sides With Stone Aggregate With Surface Consolidation With Asphalt Emulsion And Grit Over A Length Of 2,990 Km, 6. Construction Of A Sidewalk At Km 7 + 564, 7. Construction Of Road Drainage Along With Reconstruction Of Road Culverts And Entrances To The Property, 8. Construction Of Bus Platforms Equipped With Bus Shelters To Serve Public Transport Passengers, 9. Replacement Of Vertical Markings And Implementation Of Horizontal Markings, 10. Replacement Of Road Traffic Safety Devices - Elastic Barriers,11. Replacement Of Street Lighting (Replacement Of Fixtures With Energy-Saving Ones). In Its Current Condition, The Roadway Of The Road Section In Question Shows Traces Of Renovation Repairs That Have Already Been Carried Out, But Is In Poor Technical Condition (Ruts, Surface Defects, Longitudinal And Transverse Unevenness, Numerous Mesh Cracks). The Reconstruction Of The Road Will Increase The Comfort Of Travel And Ensure More Efficient And Safer Communication In A Given Area. The Investment Task Will Be Performed Based On An Extract From The Design Documentation Entitled: Reconstruction Of The District Road No. 1182K From Bryzdzyń - Tunel - Miechów, Length 9.540 Km, Section . Chrapy - Siedliska (Roundabout) From Km 5+385 - 14+925, For The Section Being Implemented. Information Boards: Preparation And Installation Of Information Boards On The Implementation Of The Project From The Polish Government Fund: Strategic Investment Program (Content Consistent With The Project Regulations Template) Other Costs: The Contractors Offer Price Must Include The Completion Of A Post-Construction Geodetic Inventory, All Costs Related To Coordination, Closure Or Exclusion Of Road Traffic.1. The Subject Of The Order Is Described In Detail In: A) Design Documentation (Extract From The Executive Document), B) Technical Specification For The Execution And Acceptance Of Works, C) Specification Of The Terms Of The Order, D) Bill Of Quantities. In The Event Of Discrepancies Or Inaccuracies In The Provisions Of Individual Documents Included In The Documentation Procedure, It Is Assumed That The Data Was Presented Correctly According To The Hierarchy Of Documents Resulting From The Order In Which They Were Listed Above. The Bills Of Quantities Attached To The Swz Are For Informational Purposes Only, Supporting The Valuation Of The Offer. After Reviewing The Design Documentation And Other Procedure Documents, The Contractor Is Obliged To Determine The Scope Of Work Necessary To Achieve The Result. 3. If The Contractor Finds That The Parameters Or National Standards Used In The Swz And In The Annexes To The Swz Or Those Translating Into European Or International Standards May Indicate The Producers Of The Products Or Their Sources Of Origin, It Means That They Are Of Such Importance That The Technical Parameters Of The Products So Indicated Determine The Minimum Expectations Required By The Ordering Party As To The Quality Of The Products To Be Used To Perform The Subject Of The Contract. The Contractor Is Entitled To Use Equivalent Products, Which Means Those With Technical Parameters Not Worse Than Those Indicated In The Swz And In The Annexes To The Swz, It Is Also Allowed To Demonstrate Standards Equivalent To Those Indicated In The Documentation, Opz And To Demonstrate Equivalence By Using Materials Corresponding To The Standard Of The Product Indicated By Name. The Burden Is On The Contractor To Indicate Equivalence. 4. The Contractor Is Obliged To Perform The Subject Of The Contract From Its Own Materials. 5. The Contractor Is Obliged To Separate And Secure The Area Of ​​Works Being Carried Out.6. The Execution Of Works, Partial Acceptance And Organization (Ohs, Fire Protection And Coordination In The Field Of Health And Safety) At The Work Site Should Be Carried Out Based On Current Standards And Regulations.