Bids Are Invited For Acquisition Of Luminaires With Led Technology And Other Electrical Materials For Maintaining Public Lighting In The Consortium Municipalities, In Accordance With The Conditions, Quantities And Requirements Established In This Notice And In Annex I - Terms Of Reference.

Lot 1 - Arm For Public Lighting In Steel Abnt 1010 To 1020, Brip-1 Model, Minimum Of 1.2 M Horizontal Projection, 1.0 M Vertical Projection - 200 Mm Long Tip And 0° In Relation To The Plane Horizontal (Without Inclination In Relation To The Floor), Manufactured With Ø60 Mm Tube And 3.0 Mm Thick Wall, With U Plate Fixing Base And Triangular Support Both With 4.25 Mm Thickness, Hot Galvanized According To Nbr 6323. , Brip-3 Model, Minimum 2.6 M Horizontal Projection, 2, Hot-Dip Galvanized According To Nbr 6323, Average Zinc Layer Thickness ≥ 60 Μm (Nbr 7399), Burr-Free Finish., Lot 2 - Flexible Cable 1 , 5Mm² - 750V. Made Up Of Bare Copper Wires, Electrolytic, Soft Temper, Stranding Classes 4 And 5 (Flexible), Insulated With Polyvinyl Chloride (Pvc), Type Pvc/A For 70 °C, Flame Retardant (Bwf-B). 750V Insulation. Applicable Basic Norms: Nbr Nm-247-3 And Nbr Nm 280 From Abnt/Mercosul. With Inmetro Certification. Distributed In 100M Roll, Lot 2 - Flexible Cable 2, Stringing Lasses 4 And 5 (Flexible), Type Pvc/Shaving 70 °C, Fireproof (Bwf-B). 750V Insulation. Applicable Basic Standards: Nbrnm-247-3 And Nbr Nm 280 From Abnt/Mercosul. With Inmetro Certification. Distributed In 100M Roll, Lot 2 - Flexible Cable 4, 0Mm² - 750V. Made Up Of Bare, Flame-Retardant Copper Wires (Bwf-B). 750V Insulation. Applicable Basic Standards: Nbr Nm-247-3 And Nbr Nm 280 From Abnt/Mercosul. With Inmetro Certification. Distributed In 100M Roll, 01/25/2024, Lot 2 - 2X10mm² Aluminum Multiplexed Cable - With Neutral Conductor: Bare Aluminum Wires And H19 Temper. Phase Onductor: Bare Aluminum Wires, H16 Temper, Class 2, Round Or Compact. Insulation: Thermoplastic Composite Pe 70ºc Or Thermoset Xlpe 90ºc. Approved And Certified In Accordance With The Requirements Of Abnt Nbr 8182. Distributed In A 100M Roll, Lot 2 - Pp Cable 2 X 1.5Mm² - 750V. Bare Electrolytic Copper Wires, Have Soft Pear, Class 4. Insulation: Polyvinyl Chloride Compound (Pvc/F), 70ºc. Cover: Polyvinyl Chloride Compound (Pvc/St1), 70ºc In Black. Applicable Specifications Nbr 5111, Nbr Nm 280 And Nbr 13249. Packaging In 100 M Rolls. With Inmetro Certification. Distributed In 100 M Roll, Lot 2 - Pp Cable 2 X 2, Class 4. Insulation: Polyvinyl Loreto Compound (Pvc/F), Lot 3 - Belt Manufactured In Copant 1010 To 1020 Carbon Steel. The Nuts Will Be: Made Of Carbon Steel Grade Mr 250. Screw: Made Of Copant 1006 To 1020 Forged Carbon Steel., Lot 4 - Piercing Type Derivation Connector - Will Be Made With Characteristics For Connection By Drilling The Insulation (Not Required Stripping The Cable Insulation), Recommended For 0.6/1Kv Xlpe/Pe Insulated Aluminum Cables Or 450/750V Pvc Insulated Copper Cables (Without Cover). Cdp70, With Pin And Metal Fuse Nut., Lot 4 - Parallel Connector In Extruded Aluminum Alloy - Accessories In Hot Dip Galvanized Steel. Connection Nearby. High Electrical Conductivity And Corrosion Resistance. Allow Bimetallic Connections., Lot 5 - Insulating Tape 19Mm X 20M - Consisting Of A Pvc Back Covered With A Layer Of Pressure-Sensitive Rubber-Based Adhesive. Approved And Certified In Accordance With The Requirements Of The Brazilian Standard Abnt Nbr Nm 60454-3-1 Type 9, Class A., Lot 5 - Self-Fusion Insulating Tape 19Mm X 5M - Based On Ethylenepropylene Rubber (Epr)