Bids Are Invited For Acquisition Of Equipment For Assembly And Installation Of Childrens Parks, To Be Installed In Public Squares In The Municipality Of São Gabriel Da Palha.

Wooden Playground With 12 Toys, Automotive Paint Finish, Weather Resistant, Cast On Ballast, Slide Made With Stainless Steel Tubes Of At Least 1 X 1.50Mm. Carbon Steel Sheet Cut To A Minimum Of 1/8, 1, 20Mm Thickness. Flat Bar Of At Least 3/16 X 1.1/4. Phosphate-Based Surface Treatment, Colored Thermosetting Polyester Resin Protective Film With Electrostatic Powder Deposition System, Silda Mig, Screws, Washers And Zinc-Plated Fastening Nuts. High Fixation Destructive Reflective Sticker Indicating Manufacturer Data And Warnings. Finishes And Protections In Injected Plastic Or Rubber. Approximate Slide Board Measurements Width 59Cm X Height 1.28M X Length 2.05M. The Equipment Is Manufactured In Accordance With The Abnt Nbr 16071:2012 Standard, Double Seesaw Manufactured With Stainless Steel Tubes Of At Least 3.½ × 2.00 Mm; 2×3.00Mm; 2×2.00Mm; 1 ¾ × 2.00 Mm; 1 X 1.50Mm; Carbon Steel Plate Of At Least 4.75 Mm; 3.00Mm; 2.00 Mm Thick. Phosphate-Based Surface Treatment, Colored Thermosetting Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding. Zinc Plated Screws, Washers And Fastening Nuts. Built-In Internal Plug Made Of Injected Plastic Measuring At Least 3.½ With A Spherical Finish Following The External Dimension Of The Tube. High Fixation Destructive Reflective Sticker Indicating Manufacturer Data And Warnings. Finishes And Protections In Injected Plastic Or Rubber. Approximate Measurements: Length 2M X Width 45Cm To 50Cm X Height 50Cm To 60Cm. The Equipment Is Manufactured In Accordance With The Abnt Nbr16071:2012 Standard, Carousel Manufactured With Stainless Steel Tubes Of At Least 31/2 X 3.75 Mm; 2 X 3Mm; 1 1/2 X 1.5Mm. Machined Sleeve Made Of 3 12 X 375 Mm Carbon Steel Sheets Of At Least 4.75 Mm. Conical Type Bearing With Balls, Phosphate-Based Surface Treatment, Colored Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding. Hi-Hat With Flange Of At Least 230 Mm X 3/16, Cut To Size With Zinc-Plated Fixing Screws Of At Least 5/8 3/8, Metal Cap At Minimum 3 1/2 Cm Spherical Finish. High Adhesion 3M Destructive Reflective Sticker Indicating Manufacturers Data And Warnings. With 08 Seats/Places. The Equipment Is Manufactured In Accordance With The Abnt Nbr 16071:2012 Standard, Double Balance Manufactured With Stainless Steel Tubes Of At Least 218 3:00 Mm. 2X2.00Mm. Drawn Tube Of At Least 38.00 × 28.00 Mm (Din 2393) And 16.00 X 12.50 X1.75 Mm (Din 2393). Flat Bar At Least 3/16 × ¼. Bearings For Armored Joints. Phosphate-Based Surface Treatment, Soldamig. Steel Chain. Vulcanized Rubber Seats. Zinc Plated Screws, Washers And Fastening Nuts. High Fixation Destructive Reflective Sticker Indicating Manufacturer Data And Warnings. Finishes And Protections In Injected Plastic Or Rubber. Approximate Measurements: Front 2.60M X Depth 1.50M X Height 2M. The Equipment Is Manufactured In Accordance With The Abnt Nbr 16071:2012, 01/25/2024