Request For Quotation Purchase Of An Armchair For An Assembly Hall

The Back Is Made With A Size Of 630X470 Mm, Consists Of Chipboard Or Plywood (Not Less Than 10 Mm), Orthopedic Foam And A Cover Made Of Dense Furniture Fabric. Foam Rubber Is Glued To The Part Of The Back From The Outside And Inside With A Special Glue. On The Inside - 30 Mm Foam, On The Outside Of The Back - 10 Mm Foam. The Back Cover Is Made Of Furniture Fabric And Has Decorative Stitching. A Cover Is Put On The Blank With Glued Foam And Fired Along The Lower Back. The Color Of The Fabric Is Optional. The Back Is Attached To The Floor With A Plate Made Of Sheet Steel, Plate Thickness 2 Cm. The Seat Is Made In Size 490*470 Cm. It Consists Of 10 Mm Plywood, Orthopedic Foam And Thick Furniture Fabric. Foam Rubber Is Glued To The Outer And Inner Parts Of The Seat With A Special Glue. From The Inner Side - 40 Mm Foam Rubber, From The Outer Side Of The Seat - 10 Mm Foam Rubber. The Seat Cover Is Made Of Furniture Fabric. A Cover Is Put On The Blank With Glued Foam And Fired At The Bottom Of The Seat. The Color Of The Fabric Is The Customers Choice. The Seat Is Attached With Clips To The Ф10 Mm Rod. The Rod Is Inserted Into The Drilled Holes In The Armrest. The Armrest Is Made In The Form Of A Trapezoidal Shape Measuring 350X60x300. It Consists Of A Square Tube Of 20X20 Plywood, 10 Mm Foam Rubber, 10 Mm Covered With Furniture Fabric, With An Overlay Made Of Coniferous Lumber, Which Is Tinted In Color According To The Agreement With The Customer And Covered With Varnish. The Armrest Stands On Two Metal Supports Made Of A Square Tube 25X25 Covered With Polymer-Powder Paint. The Supports Have A Base - A Plate Measuring 100X200 With Holes For Fastening The Chair To The Floor Gost 1685481