Quotation Are Invited For Removal Of Old Controller With Actuator, Supply, Installation, Commissioning & Testing Of New Control Unit With Complete Actuator Assembly

Quotation are invited for Removal of Old Controller with Actuator, Supply, Installation, Commissioning & Testing of New Control Unit with Complete Actuator Assembly. SCOPE OF WORKS: REMOVAL OF OLD CONTROLLER WITH ACTUATOR, SUPPLY, INSTALLATION,COMMISSIONING & TESTING OF NEW CONTROL UNIT WITH COMPLE TE ACTUATORASSEMBLY. DETAILS SPECIFICATIONS IS AS BELOW:(MAKE OF OLD UNIT IS H & B)AUMA ACTUATOR TYPE: 2SA7531-5CD20-4BB4 B49+B98+ E LECTRONICS UNIT2SY7001-5CD30-4BB4+ GEARBOX GS 50.3 # GS 250.3AUMA ACTUATOR, PART NO.: 2SA7531-5CD20-4BB4 B49+B98, 2SA7531 ELECTRICR OTARY ACTUATOR, 40-80 NM (30-59 LBF-FT), MODULATING (CLASS C ACC. TODIN EN ISO 22153), IP68, -20°C TO +70°C;5: OUTPUT SHAFT TYPE B3 ISO5210, FLANGE F10; C: OUTPUT SPEED RANGE 5-40 RPM;D: AC 1PH 220 TO 230 V(-10%/+15%), 40 TO 70 HZ, 0.4 KW, NOM. CURRENT 3.4 A(STA RTING < NOM.CURRENT), FUSE 10 A SLOW BLOWING; 2: "NON-INTRUSIVE" - COMMISSIONINGWITHOUT OPENING THE ACTUATOR, WITH CONTACTLESS POS ITION DETECTION, WITHDIGITAL POSITION INDICATION; 0: WITHOUT SPINDLE PROTECTION TUBE; 4:PROFITRON WITH COLORED GRAPHIC DISPLAY, LOC AL CONTROL STATION, 5/8BINARY INPUTS/OUTPUTS (24/48 V DC), 1 ANALOG OUTPUT (0/4...20 MA); B: RELAY BOARD WITH 8 OUTPUTS; B: POSITI ONER (0/4...20 MA); 4: ROUNDPLUG WITH SCREW CONNECTION, DUST- AND WATER-PROTECTED WHEN PLUGWITHDRAWN (DOUBLE SEALED); B49: ENGLISH - RATING PLATE DE/EN,INSTRUCTIONS AND WIRING DIAGRAM EN; B98: AUMA STANDARD DOCUMENTATION;AUMA GEAR BOX GS 160.3 - F14 (442:1), PART TURN GEAR BOX WITH REDUCTIONGEARING, 216: MAX INPUT SPEED 216 RPM, RR: VERSION, 442:1: REDUCTIONRATIO, 167: FACTOR, 80- 100: SWING A NGLE (ADJUSTABLE),92: ADJUSTED ATFACTORY, BZ: WORM WHEEL BRONZE, F10: INPUT FLANGE ACCORDING TO EN ISO5210, F14: VALVE ATTACHMENT, M ACHINED COUPLING TYPE, GJL: HOUSINGMATRERIAL GJL, 11,250 NM: MAX. OUTPUT TORQUEN-40-80: TEMPERATURE -40 ~ 80DEG. C, F15: LUBRICANT A LVANIA1029, KS:CORROSION PROTECTION # POWDER COATING, A0001: COLOUR # AUMA SILVER GRAY,IP68: ENCLOSURE, Z: HOUSING COVER- POINTER CO VER, EN-L: NAME PLATE IN ENGLISH, EN: OPERATING INSTRUCTIONS IN ENGLISH,02.03.014.03: DECLARATION OF COMPLIANCE, 0: EX (GM009);ELECT RONICS UNIT PART NO. 2SY7001-5CD30-4BB4, 2SY70015 ELECTRONICS UNITFOR 2S.75 (MODULATING, CLASS C), SILVER-GRAY COATING (SIMILAR TO R AL7037); C: OUTPUT SPEED RANGE 5-40 RPM - POSITIONING TIME RANGE 80-10SEC/90°; D: AC 1PH 220 TO 230 V (-10%/+15%), 40 TO 70 HZ; 3:2S A753, 0:FOR ROTARY ACTUATOR 2SA7, 4: PROFITRON WITH COLORED GRAPHIC DISPLAY,LOCAL CONTROL STATION, 5/8 BINARY INPUTS/OUTPUTS (24/48 V DC), 1 ANALOGOUTPUT (0/4...20 MA); B: RELAY BOARD WITH 8 OUTPUTS;B: POSITIONER(0/4...20 MA); 4: FOR ROUND PLUG CONNECTION,DUST- A ND WATER-PROTECTEDWHEN PLUG WITHDRAWN (DOUBLE SEALED);WARRANTY: 2 YEARS FROM THE DATE OF INSTALLATION, TESTING & COMMISSIONINGOF NEW CONTROL UNIT WITH COMPLETE ASSEMBLY.NOTES TO SUPPLIERS:Ø#THE CONTRACTOR SHALL COMPLY WITH THE TECHNICAL SPECIFICATION ATTACHEDHEREW ITH, TERMS AND CONDITIONS.Ø#ACCEPTABLE BIDDERS SHALL HAVE RELEVANT WORK-EXPERIENCE IN CARRYINGOUT SIMILAR JOBS IN POWER STATIONS.Ø#P RIOR TO SUBMISSION OF OFFER, CONTRACTOR SHALL VISIT THE SITE FORDETAILED UNDERTAKING, EVALUATION AND DETERMINING THE ACTUAL SCOPE OF WORKS. THE BELOW MENTIONED PERSONS MAY BE CONTACTED FOR SITE VISIT.1. MUHAMMAD ABDUR RASHIDENGINEER I & C, MOB. 0508585215, MUHAMMAD [email protected]. SIVA KUMARASSISTANT ENGINEER, MOB.0525420081,SIVAKUMAR.MARIMUTHU@DEWA. GOV.AEØ#ANY ADDITIONAL WORK, THAT WAS DO NE AFTER ORDER PLACEMENT AND WASUNFORESEEN BY THE CONTRACTOR DURING SITE VISIT SHALL BE IN THE SCOPE OFTHE CONTRACTOR WITHOUT ANY EX TRA COST TO DEWA.Ø#ANY DEVIATION FROM THE TECHNICAL & COMMERCIAL SPECIFICATIONS MUST BECLEARLY INDICATED IN THE QUOTATION. OTHERWISE , THE QUOTATION WILL BETREATED AS IN COMPLIANCE WITH OUR TECHNICAL & COMMERCIAL SPECIFICATIONS. Qty: 1 STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://www.dewa.gov.ae/api/RfxDownload/Get/2332400171