Bids Are Invited For Acquisition Of Furniture For Use In Schools And In The Municipal Education Office.

Class/School Chair Set (Model Fnde - Cja-06) Desk: Sides And Book Holder Support Made From 29X58mm Oblong Section Steel Tube In 16(1.5Mm) Plate. Upper Crossbar Made From Steel Tube Circular Section 31.75Mm (1 ¼?) Plate 16 (1.5Mm). Feet In Circular Section Steel Tube 38Mm (1 ½?) In Plate 16 (1.5Mm). Closing With Injected Polypropylene Tips And Shoes In Blue, Fixed To The Structure Using 4.8X16mm Diameter Snap Rivets. The Molds For The Table Tips And Shoes Must Be Marked With The International Recycling Symbol, Showing The Polymer Identification Number And The Name Of The Company Manufacturing The Injected Component. Injected Parts Must Not Have Burrs, Injection Flaws Or Sharp Parts. Anti-Ferruginous Treatment Must Be Applied To Metal Parts To Ensure Resistance To Corrosion In A Salt Spray Chamber For At Least 300 Hours. Welding Must Have A Smooth And Homogeneous Surface And Must Not Have Sharp Points, Rough Surfaces Or Slag. All Pipe Abutments Must Be Welded Around The Entire Perimeter Of The Union. Spatters Or Welding Irregularities, Burrs And Sharp Corners Must Be Eliminated. Top (600X450mm) In 18Mm Thick Particleboard Wood (Mdp) Covered On The Upper Face In High Pressure Melamine Laminate, 0.8Mm Thick, Textured Finish In Gray And Covered On The Lower Face In Balancing Plate - Against Phenolic Plate Of 0.6Mm. Application Of Claw Nuts With Metric M6 Thread And 10 Mm Length. Pvc Maple Tapes With Primer, Textured Finish In Blue Color Glued With Hot Melting Adhesive, Nominal Dimensions Of 22Mm(Width) X 2.5Mm(Thickness). Rounded Corners. Fixing The Top To The Structure Using 06 M6 Metric Thread Clamp Nuts (Diameter 6Mm), 06 M6 Metric Thread Screws (6Mm Diameter), Length 47Mm Philips Pan Head. Book Holder (503X304mm) In Injected Polypropylene In Gray Color. In The Mold Of The Must Book Holder..., Childrens Collective Setchildrens Collective Set, 1 Central Table, 8 Trapezoid Tables And 8 Chairs: Central Table: 3/4 Steel Tube Structure (Wall 1.06Mm) Monoblock Format, 3 Plastic Tips /4 Internal Fixed Through Fitting. Welding Of Metallic Parts Using The Mig Process Throughout The Perimeter Of The Union, Joints With A Smooth And Homogeneous Surface, Without Presenting Sharp Points, Roughness Or Slag. Surface Protection With Special Anticorrosive Treatment And Blue Epoxy Powder Painting. Top (870Mm In Diameter) In 18Mm Thick Mdf Covered In Melamine Laminate At Least 0, Subdivided Into Four Colors To Accompany The Wallets. T-Type Colorful Pvc Edges Fixed Through Fitting. Top Fixed To The Structure Using 5X30 Self-Tapping Screws. Height 580Mm. Trapezoid Tables: Structure In 3/4 Steel Tube (Wall 1.06Mm), Crossbars In 3/4 Tube (Wall 0.90Mm) For Better Strength To The Structure. Top Closure With Internal 3/4 Plastic Tips Fixed Through Snap. Welding The Components That Form The Structure Must Be Connected To Each Other Through Welding Using The Mig Process At All Joints. Surface Protection With Special Anti-Corrosion Treatment And Epoxy-Powder Painting. 3/16 Round Steel Wire Grating Book Holder. Top (620X340x400mm) In 18Mm Thick Mdf, Trapezoidal Shape, Covered In Colored Melamine Laminate With A Minimum Thickness Of 0.8Mm. Border With Finish