Tenders Are Invited For Structural Shell Work - Blb Nrw Ac / Aachen / Köka / Fktuausbgeb / Shell Construction Work_005-24-00009_Ciii

Structural Shell Work - Blb Nrw Ac / Aachen / Köka / Fktuausbgeb / Shell Construction Work_005-24-00009_Ciii. New Construction Of A Functional And Training Building In The Theodor Körner Barracks Aachen. Shell Construction Work The Gross Floor Area Of ​​The “Automotive Training Building” Is Approx. 2110 M2. The Building Has A Gross Volume Of Approximately 8,284 M3. The Twofold In Itself The Staggered Building Extends Over Two Floors And Has A Maximum Dimension Of Approx. 66.72M X 18.74M. The Structure Is Caused By The Bending And The Receding Staircases And The Main Entrance Are Structured To Visually Extend The Length Of The Building To Reduce. The Building Will Have A Flat Roof With External Drainage. One No Basement Is Planned. The Facade Is Curtained And Ventilated Facade Made Of Aluminum Siding Planned. To Structure And Loosen Up The Facade Are The Staircase, Main Entrance And The Technical Areas With A Curtain And Rear-Ventilated Textile Concrete Facade. The Generous Glazing Of The Main Entrance And The Stairwell Also Makes The Function Easy To Read And Ensures A Bright And Attractive Interior. All Other Windows Are Grouped Together To Form Window Bands. On The Ground Floor There Are All Required Office Spaces With Sizes Of 12M2, 15M2 And 18M2 And 21M2 Arranged Along A Central Access Corridor. Are Centrally Located Printer Room, Tea Kitchen And Sanitary Facilities Located. The Storage Rooms Are Located Are Located In The Southern End Of The Building And Can Be Accessed From The Outside Via Their Own Entrance Become. The Technical Rooms Electrical Distribution, Security Lighting, Fire Alarm System, Drinking Water Connection And Heating Are Located At The Northern End Of The Building And Have Each With A Separate Outside Entrance. The Classrooms Are On The Upper Floor Each Arranged In An Attached Storage Room For Teaching Materials. The Sanitary Ones Systems, Niuks, Electrical Distribution, It Technology, Cleaning Supplies Room And Ventilation Are Located Is In Its Own Wing, Accessed Via A Central Aisle. The Training Building Consists Of A Fire Compartment. The Load-Bearing And Stiffening Components (External, Interior Walls And Ceilings) As Well As The Lightweight Partition Walls Must Be Made Fire-Retardant. The Building Was Divided Into Usage Units Of 400M2, Which Were Fire-Protected Are Separated. Rooms With Special Fire Protection Are Also Separated Fire Hazards (Storage And Technical Rooms). The First And Second Escape Routes Are Structural Via Direct Exits, Necessary Stairs And Internal Connecting Doors Between Usage Units Safely Guaranteed. There Is Also Safety Lighting And Markings Emergency Routes (Corridors And Stairs) Are Provided. Hallway 1.001 On The 1St Floor Is Considered More Necessary Corridor Trained. The Roof Surface Is Designed As A Flat Roof With An Attic. The Attica Serves As Structural Fall Protection On The Main Roof. In The Section Above The Ventilation Center A Rope Safety System Is Provided For Fall Protection.