Corrigendum - Quotation Are Invited For Oil Leakage

Quotation are invited for Oil Leakage 1032304467 Oil Leakage 1 ITEM-00001 RECTIFICATION OF OIL LEAKS IN PRDS, RADIATOR AIR VENTS AND VALVESPINDLES OF STG20 MAIN TRANSFORMER (420/19KV, 311 MVA, ONAN/ONAF/ODA F,MAKE: HYUNDAI)SCOPE OF THE WORK:1) THE FOLLOWING IDENTIFIED OIL LEAKS SHALL BE ATTENDED IN STG20 MAINTRANSFORMER.A) MAIN TANK PRVS -2 NOSB) OLTC TANK PRV-1 NOC) OLTC TANK FLANGE -1 NOD) RADIATOR AIR VENTS- 30 NOSE) RADIATOR VALVE SPINDLES - 11 NOS (4 @ BOTTOMS & 7 @ TOP)2) THE JOBS SHALL BE CARRIED OUT DURING UNITS ANNUAL OUTAGE BETWEEN08.02.2024 # 02.04.2024 WHICH IS SUBJECTED TO THE CHANGE S BASED ONDEWAS REQUIREMENT. IN CASE OF ANY CHANGES, ADVANCE NOTIFICATION WILL BEGIVEN BY 1 WEEK.3) ALL REQUIRED GASKETS, O-RINGS, FASTENERS AND CONSUMABLES RELATED TOTHE WORK SHALL BE ARRANGED BY THE CONTRACTOR. (MATERIAL OF GASKETS &O-RINGS: NITRILE RUBBER / NE BAR)4) TRANSFORMER FULL TANK OIL SHALL BE FILTERED FOR 3 CYCLES. OILCAPACITY OF EACH TRANSFORMER IS APPROX. 120,000 LITERS. OIL FILT RATIONUNIT & OIL STORAGE TANK SHALL BE ARRANGED BY THE CONTRACTOR FOR THE JOB.FILLED TRANSFORMER OIL IS: MICTRANS "DI" IEC60296(2 003): INHIBITED OFMICHANG OIL IND.CO.LTD. REQUIRED OIL FOR TOP UP WILL BE PROVIDED BYDEWA.5) OIL TESTS (DGA, MOISTURE/WATER CONTENT, CHEMICAL, ACIDITY & BDV)SHALL BE CARRIED OUT AFTER COMPLETION OF THE WORK.6) THE CONTRACTOR WILL BE SOLELY RESPONSIBLE FOR ANY DAMA GE OF THETRANSFORMERS ISOLATORS /BUSHING OR ANY DEWA EQUIPMENT DUE TOMISHANDLING DURING THE JOB AND SHALL ARRANGE TO REPLACE THE DA MAGEDPARTS / EQUIPMENT IMMEDIATELY AT THEIR OWN COST.7. ANY JOB WHICH IS NOT INCLUDED IN THE SCOPE, BUT ACTUALLY REQUIRED TOCOMPLETE THE JOB SATISFACTORILY MAINTAINING THE QUALITY, SHALL BECONSIDERED WITHIN THE CONTRACTOR#S SCOPE.8) HIGHLY SKILLED MANPOWER HAVING KNOWLEDGE OF RISKS ASSOCIATED WITHPOWER TRANSFORMER AND OIL REGENERATION DEVISE SHALL BE DEPLOYED FOR THEJOB.9) ALL NECESSARY TOOLS/ EQUIPMENT REQUIRED FOR JOB EXECUTION SHALL BEUNDER THE SCOPE OF CONTRACTOR. ONLY TESTED/CERTIFIED TOOLS SHALL BE USEDFOR JOB EXECUTI ON.10) COMPLETE REPORT TO BE SUBMITTED AFTER THE WORK COMPLETION.11) THE CONTRACTOR SHALL CARRY OUT RISK ASSESSMENT AND TBT FOR ALL HISWORK AND SUBMIT FOR DEWA APPROVAL.12) ALL THE WORKMEN SHOULD WEAR NECESSARY PPES LIKE SAFETY HELMET,SAFETY SHOES, GLOVES, SAFETY BELT ETC. WHILE AT WORK.M. DEWA SAFETY STANDARDS & GUIDELINES SHOULD BE STRICTLY FOLLOWED BYCONTRACTOR DURING THE EXECUTION OF JOBS. 13) AFTER AWARD OF THE CONTRACT, GATE PASS ENTRY APPLICATION SHALL BESUBMITTED FOR THE STAFF, VEHICLES & DRIVERS. ALSO, ALL THEMATER IALS/TOOLS SHALL BE BROUGHT TO THE SITE THROUGH MATERIAL GATEPASS-INWARDS AND TAKEN AWAY BY MATERIAL GATE PASS-OUTWARDS.14) SCAFFOLD ING & CRANE WILL BE PROVIDED BY DEWA.15) WARRANTY: ALL THE WORK CARRIED OUT SHALL HAVE A WARRANTY FOR 1 YEARFOR MATERIALS AND WORKMA NSHIP FROM THE DATE OF JOB COMPLETION.16) FOR ANY MORE INFORMATION, PLEASE CONTACT MR. BUVANESHKUMAR SELVARAJ,ENGINEER, MOBILE NO. 0 55-2107068 OR MR. SUMAN, ENGINEER, MOBILE NO:052-9081236. 1 AU STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://www.dewa.gov.ae/api/RfxDownload/Get/2332302928