Tenders Are Invited For Cnc Lathe - 23 22 2Cl 042 Tandem Urd For The Munich-Langwied S-Bahn Plant, Db Regio Ag

Cnc Lathe - 23 22 2Cl 042 Tandem Urd For The Munich-Langwied S-Bahn Plant, Db Regio Ag. A Cnc-Controlled Tandem Underfloor Wheel Set Lathe Is To Be Built For Db Regio Ag At The Munich-Langwied Location Be Procured (New Procurement/New Construction). This Publication Relates Refers To Production, Delivery, Assembly, Commissioning, Training, Trial Operation And Final Acceptance Of The Machine Including All Necessary Peripherals For The Munich-Langwied Plant. The Machine Mainly Has Wheelsets From The Munich S-Bahn In Standard Gauge 1,435 Mm To Measure And Process. The Tandem Underfloor Wheelset Lathe Must Be Used For The Following Tasks/Functions Be Suitable: ► Automatic Measurement Of The Wheel Sets In At Least The Usual Wheel Set Dimensions A1, A2, D, ∆D, E, H, Qr, G And H ► Measurement/Processing Of The Wheel Sets In The Installed Condition Or As An Individual Wheel Set With Bearings/Bearing Housings O Wheel Sets Can Be Internal Or Externally Mounted And Partly Mechanically Coupled To Each Other ► Automatic Reprofiling The Wheel Rims/Wheel Treads On Monoblock And Tire Wheel Discs With Profiles According To Din En 13715 Or Ril 984.0400 In Different Diameters And Widths As Well As: O Processing Of Wheel And Shaft Brake Discs (Tarpaulins) O Processing Outer Wheel Rim Face And Re-Grooving Of The Identification Groove ► Proof Of Compliance With The Regulations Condition Of The Wheelsets After Processing With Regard To The Parameters D1,2, ∆D1,2, E1.2, H1.2, Qr1.2, H1.2, G1.2, A1 And A2 With A Measuring System According To Din 27201-9 ► Logging Of All Measured And Calculated Data In An Electronic Database (Machine-Internal Or Db-Hosted) Plus The Automated Transfer Option To The Internal Erp System (Sap Isi) ► Possibility Of Remote Maintenance Access Via “Secure “Remote Maintenance” ► Output Of Defined Machine Information Via Opc Ua Interface ► Registration/De-Registration Of Operators Via Db Group Id And Assignment Of The Corresponding Ones Authorizations The Underfloor Wheelset Lathe Is Equipped With An Automatic Chip Disposal Device With Chip Crusher, A Smoke And Dust Extraction System, A Hydraulic System And More Functionally Necessary Peripherals According To Ce Conformity Using The Latest State-Of-The-Art Technology To Design. The Primary Measuring Circle Diameter Range To Be Processed Is Between 580Mm And 1,250Mm. The Wheelset Shaft Length Including The Bearings/Bearing Housings Is Maximum 2,600 Mm, The Axle Load Acting On The Machine Is A Maximum Of 250 Kn (Plus Any Holding Forces That May Need To Be Applied).